UGREEN JT001 Bluetooth Audio Adapter User Manual

UGREEN JT001 Bluetooth Audio Adapter

Technical Indicators

Bluetooth configuration files: BDR, EDR, A2DP, HSP, AVRCP
Scope of work: An open area of up to 10 meters without any obstacles

Interface Diagram

1. Adapter
2. Microphone
3. Indicator light
4. Switch/Multi function
5. Previous track & Next track/volume up & volume down
6. TF card slot
7. Charging interface

TO CONNECT GUITAR TO BlUETOOTH

TX mode (Bluetooth transmission mode):

To wirelessly transmit their audio stream to Bluetooth headphones or speakers. Plug and play, No drivers need to be installed either.

Power on:

Press and hold the HOME button for 3 seconds to turn on/off. After turning it on, the red light will flash.
After successfully connecting to Bluetooth, the red light will stay on.

Automatic pairing:

Turn on Bluetooth headphones or Bluetooth speakers to ensure they are in pairing mode. Wait until the Bluetooth transmitter and Bluetooth headphones/speakers automatically pair. After successful pairing, the TX red light will stay on, and then you can play music or videos on the computer, and the sound will be transmitted to Bluetooth headphones or speakers.

TX transmission mode:

To use with the guitar, connect the bluetooth adapter to the guitar.
If pairing fails, you can turn off the power, then restart the Bluetooth transmitter and Bluetooth earphones/speakers, repeat the above steps, and then try a few times;
If you are using this product on a TV, please confirm which interface is the audio output port. The device needs to be connected to a 3.5mm audio output port instead of an audio input port.

RX mode (Bluetooth receiving mode):

Specially designed for speaker/headphones and most mobile devices with 3.5mm auxiliary ports, making ordinary speakers immediately wireless Bluetooth stereo speakers, transmitting music wirelessly from smartphones to home stereo systems.

Step 1 Power on:

Turn on the device and connect the 3.5mm audio plug to the speaker. Then triple-click Home switch to RX, and RX will flash blue, indicating that the adapter is in receiver mode and waiting for pa1nng.

Step 2: Pairing with a smartphone:

Enable Bluetooth on the smartphone in the settings and search for “JT001” After successful pairing the RX blue light will stay or;, and then you can play music on your smartphone, and the sound will be transmitted to the speaker.

RX receiving mode

Note:

In receiving mode, when an incoming call is made, click the power button to answer/end the call, and long press to reject the call.
If pairing fails, please turn off your phone’s Bluetooth or turn off the adapter power, then turn on Bluetooth, restart the adapter, repeat the above steps, and then try again, Please confirm that the audio cable i1nterface is an audio input port. The device needs to be connected to a 3.5mm audio input port instead of an audio output port.

TF card mode

Insert the TF card into the adapter and connect it to the Bluetooth speaker/Bluetooth head hone (Bluetooth device).
Press and hold the HOME button for 3 seconds to turn on/off. After turning it on, the red light will flash.
Double click to flash red and blue light alternately.
After successfully connecting to Bluetooth, the red light will stay on. Click the HOME button to play/pause music.
Click the rewind button to play the previous music,long press to reduce the volume.
Click the forward button to play the next music, long press to increase volume.
The BT transmitter will turn off automatically during charging. When charging for BT transmitter the red light is always on, and when fully charged, the blue light is stay on.

MICRO USB CORD INCLUDED TO CHARGE DEVICE.
BATTERY CAPACITY 150 mAh
CHARGING TIME : 1.5 HOURS
PLAYBACK TIME : 5 HOURS

Quick Guide

to RX mode.
Play/Pause| When playing music, short press the HOME button
Power on/off| Long press HOME button

Caution : Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

INCLUDES:l(ONE)GUITAR 9.06in.X2.24in.X30.5in.(23cmX5.7 cmX77.5cm),
1(ONE)GUITAR STRAP 47.24in.:1:3. 94in.X1.65in.(120cm:1:10cmX4.2cm),
1(ONE)INSTRUCTION SHEET
1(ONE)RECHARGEABLETRANSMITTER 2.17in.X.98in.X.5in.
(5.5cmX2.5cmX1.3cm),
l(ONE)GUTAR CORD 118.11in.:1:3.94,in(300:1:10cm),
l(ONE)CHARGING CORD 8.66in.:1:1.18in(22cm:1:3cm).
2 (TWO)ADAPTER 1. 97 i n.X.3 5 i n.X.3 5 i n.(5cmX0. 9cmX0. 9cm),
1. 77in.X.39in.X.39in.(4.5cmX1cmX1cm),
3(THREE) GUITARPCKS 1.18in.X.1.02in.X .04in.(3cmX2.6cmX.09cm).
1 (ONE) WRENCH 1. 77in.X .6in.x.63in.(4.5cmx.15cmX1.6cm).

THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC., AND ANY USE OF SUCH MARKS BY IWORLD IS UNDER LICENSE. ALL OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE OWNERS.

WARNING : CHOKING HAZARD Small parts. Not for children under 3 years

WARNING : THIS PRODUCT CONTAINS FUNCTIONAL SHARP POINT/SHARP EDGES

Use with care and keep away from children

Guitar Features

1. Turn the pegs on each string to tighten or loosen the string and produce different sounds. Do not over tighten the strings.

2. Volume control

3. Guitar port to connect transmitter or guitar cable

4. Connection point for strap

5. Guitar cable
   Guitar Accessories:

6. Wrench for pick up tuning

7. Guitar picks

8. Guitar strap (adjustable)

Increase the height of sound pickup with a wrench. By adjusting the screws with the wrench the strings will move up and down. This will increase or decrease the sound produced.

To use the guitar cable to play while connected to a seperate sound amplifying speaker:
Turn on your speaker (not included).
Connect the guitar directly to the speaker and play.
Nothing to set up or install!

Use the volume control and other features on the speaker to affect the sound when plugged in.
If no sound comes out, ensure your speaker is ON and fully charged or connected to a power source.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>