ATOLL AM200 Signature Power Amplifier Owner’s Manual
- September 9, 2024
- ATOLL
Table of Contents
OWNER’S MANUAL
AM200 SIGNATURE
POWER AMPLIFIER
www.atoll-electronique.com
AM200 Signature Power Amplifier
You have just bought an amplifier with exceptional audiophile performance. We
really thank you for your confidence in our products. To get the best part of
your amplifier, please read carefully this manual.
YOU WILL FIND ENCLOSED
- A power amplifier AM200 Signature.
- One power lead.
- This manual with the certificate of guarantee.
Latest update: 10th June 2024, 15:00
CAUTIONS
- Do not make any connections when your device is powered on.
- Put your device in a dry and well-ventilated place, far from a source of heat.
- Avoid putting something on your amplifier.
- Strictly respect polarity + & – , as well as the left and right connections.
- Avoid any short-cut.
- Do not plug-in two speakers in parallel on the same output.
ADVISES
- To optimize the performance of your device, you should switch it on at least half an hour before any listening, the time for the power stage to reach its ideal working temperature.
- Your device will give you optimal listening quality after this timelapse.
- Between two uses, it is, therefore, preferable to let the device on so that it remains at its optimum temperature.
- At night or when you leave your home, it is best to use the main switch to turn off the device.
- To optimize the sound quality of your system, we recommend that you choose good-quality connection cords. Do not hesitate to ask your specialist dealer for advice.
- Your amplifier is equipped with a temporized switch on. A relay protects loudspeakers on the output power stage from over-voltage.
CONNECTINGS + TRIGGER
-
Ampli input and output (line).
-
General power plug and ON/SLEEP button (with internal fuse).
-
Left channel output.
-
Right channel output.
-
12V Trigger input (1)
(1) Trigger input: This input allows the control ON/SLEEP of your amplifier simultaneously to any device with a 12V Trigger outlet. For the system to operate, the ON/SLEEP button on yourAM200 must remain in the SLEEP position (0). If the switch is inthe ON position (I), the amplifier will work but not the Trigger function. Trigger cable must be a Male to Male stereo jack plug Ø 3,5 mm (1/8”). -
Power indicator led.
CONNECTINGS
(Configuration: 1 Preamplifier & 2 bridged mono amplifier).
BRIDGE MONO MODE
To transform your Power Amplifier from Stereo to Mono, you have to push the
switch a placed inside the appliance as shown below:
Warning: be sure that your amplifier is unplugged and that no other
appliance is plug-in during this operation.
E.C. MARKING
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE, and national transpositions.
WARRANTY CONDITIONS
The guarantee is two years period from the date of purchase. We recommend you
to ask your dealer to fill the guarantee and to conserve it. The guarantee is
only available for appliances that have been used correctly.
MAINTENANCE
Before any cleaning, switch off your device. Use a soft and dry rag to clean
up the appliance. Never use acetone, white-spirit, ammoniac, or any kind of
product containing an abrasive agent.
Never try to clean up inside the appliance.
TECHNICAL DATA
Power Wrms/ch./8Ω (230v): | 120 W |
---|---|
Power Wrms/ch./4Ω (230v): | 200 W |
Impulse power Wrms/ch.: | 300 W |
Power supply: | 2×340 VA |
Total of capacitors: | 57 280 µF |
Number of inputs: | 2 |
Switch OFF consumption: | 0 W |
ON consumption: | 20 W – 600 W |
Input impedance: | 220 kΩ |
Sensitivity: | 1,77 V |
Signal/Noise ratio: | 100 dB |
Distortion at 1 kHz: | 0,05% |
Frequency response: | 5 Hz – 100 kHz |
Rising time: | 1,5 µs |
Dimensions: | 440×295×95 mm |
Weight: | 12 Kg |
WARRANTY FORM ~ MODEL AM200 Sig
To present to your dealer with the invoice when returning back the appliance:
ATOLL ELECTRONIQUE®
Bd des Merisiers
50370 BRECEY
FRANCE
Date of purchase:………………………
Place of purchase:……………………..
Buyer signature:……………………….
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>