ATOLL ELECTRONIQUE MS120 Mini-Streamer Owner’s Manual
- June 5, 2024
- ATOLL ELECTRONIQUE
Table of Contents
OWNER’S MANUAL
STREAMER
MS120
You have just bought a product with exceptional audiophile performances. We really thank you for your confidence in our products. To get the best part of your streamer, please read carefully this manual.
SAFETY INSTRUCTIONS
- Do not make any connections when your device is turned on.
- Install your appliance in a dry, well-ventilated place away from any source of heat.
- Do not put anything on your Streamer.
- Avoid any short circuits.
- Never connect two speakers in parallel to the same output.
USER BITS OF ADVICES
- It is recommended to choose good quality cords to connect this appliance to the other devices. Feel free to take advice from your specialist dealer.
YOU WILL FIND ENCLOSED
– A streamer.
– A power lead.
– An RCA chord.
– A remote control.
– Two antennas.
– This manual with the certificate of guarantee.
GENERAL INFORMATION
GENERAL INFORMATION AND BITS OF ADVICES
Your ATOLL Streamer is DLNA and UPnP compatible, it can run in a network with
other devices.
Take the time to read carefully the section “getting started” of this manual
(page 7) before putting your unit under voltage.
The display shows the selected radio station logo and has information about
the files on the network and USB type sockets. It indicates the level of the
volume from 0 to 100.
To use your device as easily as possible, download the ATOLL Signature app
from the Apple Store or the Google Play store.
ACCEPTED FORMATS
– MP3 (8-48 kHz 16 bits).
– AAC (24-96 kHz 16 bits).
– AAC+ v1/HE-AAC.
– FLAC (44,1-96 kHz 16/24 bits).| – FLAC 192 kHz/16-24 bits; available on
USB-A inputs, RJ45 link, and WIFI.
– WAV (22-96 kHz 16/24 bits).
– AIFF & ALAN.
– DSD64 & DSD128.
---|---
CLEANING
Before any cleaning, switch off your appliance. Use a soft and dry rag to
clean up the appliance. Never use acetone, white-spirit, ammoniac, or any kind
of product containing abrasive agents. Never try to clean up inside the
appliance.
WARRANTY
The guarantee is two years long from the date of purchase. We recommend you
ask your dealer to fill the guarantee and conserve it with your invoice. The
guarantee is only available for the appliance which has been used correctly
regarding this owner’s manual.
TECHNICAL DATA
Audio power: | 4,6 + 3,2 VA |
---|---|
Grocery: | 4,5 W + 4,5 W flyback topology |
Total of capacitors: | 5 435 µF |
Audio outputs: | 1 Stereo Analog Output |
2 Digital outputs: Coaxial and Optical Toslink
Audio inputs:| 2 Stereo Analog Inputs.
Digital Inputs: 2 Coaxial, 2 Optical Toslink
1 Bluetooth®
Output stages:| 2 discrete non-feedback stages
Dynamic:| 123 dB
Output impedance:| 22 Ω
Output level:| 2,8 Vrms
Signal/Noise Ratio:| 123 dB
Distortion rate at 1 kHz:| 0,0005 %
Bandwidth:| 5 Hz – 20 kHz
Rise time:| 1,7 µs
DAC converter:| Burr-Brown PCM1796 24 bits/192 kHz – DSD128
Dimensions:| 320×230×94mm
Weight:| 3,0 Kg
CONNECTIONS
- Analog audio output.
- Analog inputs 1.
- Analog inputs 2.
- Optical digital output.
- Coaxial digital output.
- Optical digital input 1.| 7) Optical digital input 2.
- Coaxial digital input 1.
- Trigger output (a).
- Coaxial digital input 2.
- Ethernet link input (RJ45).
- USB type A input.| 13) Power input.
- ON/OFF switch.
- WIFI connection antenna.
- Bluetooth® antenna connection.
---|---|---
(a) Trigger output: this output is used to control the switching off/on of any device equipped with a compatible trigger input (see instructions for use).
The trigger cable must be a Male to Male jack plug 3.5mm (1/8”).
- Menu navigation keys.
- Display.
- USB A type input.
a) BYPASS mode indicator led.| 20) Headphone outputs (jack 3.5)(1). - Volume keys down and up.
- ON/OFF key & stand-by led indicator
---|---
(1) To avoid electrostatic shock, we recommend connecting the headset when the device is switched off or on standby. While using headphones, turn off the amplifier.
CONNECTING WIFI AND BLUETOOTH® ANTENNAS
You will find the antennas in the bag of the remote control.
Make sure that the WIFI and Bluetooth® antennas are correctly installed before
any connection and use.
Please use the 2 supplied antennas (identical) or an antenna with a male
connector.
ATOLL REMOTE CONTROL
REMOTE CONTROL FUNCTIONS
The remote control uses 2 lithium CR2032 (3V) batteries. Make sure to place ⊕
upside.
Warning: some keys may have different uses depending on the menus or
context.
Keys already available from the front panel: 17) Menus control keys.
21) Volume control ⊕ & ⊖.
22) Stand-by mode.
23) ALPHANUMERIC KEYS (from 0 to 9 and from A to Z). By quick press on key (2)
i.e. select a, b, c, 2, A, B, C
24) HOME: allows to come back to the main menu.
25) PLAY/PAUSE.
26) FAST FORWARDS: inactive.
27) PLAY THE NEXT TRACK.
28) STOP.
29) PLAY: allows to show the track or radio which is playing.
30) WPS: quick WIFI connection: press simultaneously on this key and the key
of the internet receiver.
31) BACK: return on menus.
32) FASTBACK: inactive
33) OK: validation key in menus.
34) Access to the beginning of the track or previous track with a double
press. In menus: cancels the last character.
35) SHUF: shuffle.
36) REP: repeats track (symbol with 1) or of the album.
37) DISP: changes in the display mode.
38) MUTE: mute key (not active on BYPASS).
39) Inputs selection keys: Coaxial 1; Coaxial 2; Optical 1; Optical 2; Line1;
Line2; BYPASS (hold 4 seconds).
40) FAV: add or remove a track or radio.
41) Keys IN/PR: they allow control of ATOLL Integrated or Preamp.
CONNECTING SETUP
SOURCE MODE OR PREAMPLIFIER (BYPASS)
This device can be used as a source (like a CD player) or as a preamplifier
which gives the ability to control the volume.
The diagrams below show the wiring possibilities according to these different
applications.
TRIGGER LINK
This appliance is equipped with a Trigger that allows the switch ON/OFF of any
amplifier equipped with the same kind of trigger inputs (amplifier ATOLL
AM200SE).
Appliances must be linked as shown below:
So that the system is operating, the ON/OFF button of your AM200SE must remain
in position OFF (0). If the switch is in the ON position (1), the amplifier
will work but not the Trigger function.
The trigger cable must be a Male to Male jack plug 3.5mm (1/8”).
Therefore, at each standby output Streamer, the amplifier will turn on. It
will also turn off each time it goes to sleep.
USES
GETTING STARTED
Before switching on your appliance, connect the network cable (RJ45) to
input (11).
For much better results and best performances, we highly recommend to uses
a wired connection better than a WIFI connection.
Wait for the start-up screen to appear before any manipulation.
You can then use the navigation buttons (17) on your remote control or on the
front panel to select the menus.
On the first connection (or changes in the network configurations) you will
have to check the network settings of your appliance. If this setup is not
perfectly settled, some of the functions of the streamer (internet radios or
reading music of your server) will not be operated. Available menus:
SETTINGS
NETWORK CONFIGURATION:
NOTE.: Network configuration starts immediately when an RJ45 cable is
linked (11).
- Go to the “Settings” menu then to “Network connection”.
- Select the “Network Wizard” menu.
- You will have to choose the type of network. Press “Network type” and choose “Automatic”, “Wired”, “Wireless”, or “Hybrid”.
WIRED:
If you already plugged the network cable, the device will indicate that the
appliance is connected
The symbol indicates that the wired link is established.
If not, configure the network while choosing “Configure Wired” and then
“Manual”. Here you can enter directly the IP address.
WIRELESS:
In this case, your appliance will be able to find the Wireless connections
available in your home.
Advice: We advise you to use the WPS button to connect your appliance to your
WIFI network.
Press on the WPS button of your internet receiver and then on the WPS button
of the remote control (30).
The display shows “WPS in progress” then when the connection is made display
shows “connected”.
If the WPS is not possible, press on “scan”. You’ll see the possible WIFI
network available in your place. Select yours and, if needed enter the WIFI
key.
NB.: In some environments (buildings), several networks can be present.
Make sure you choose yours.
Enter, in CAPITAL LETTERS and without space, the WIFI security key which
appears below your internet box.
Confirm your password by pressing the “OK” button (33).
ANOTHER POSSIBILITY TO CONNECT: IS BY THE ATOLL SIGNATURE AND SOFTAP APPLICATION:
- Download the ATOLL Signature application on a smartphone or tablet.
- Connect your smartphone to the “Softap” WIFI network.
- Launch the ATOLL Signature application.
- In the Settings/Network configuration/Wireless configuration/Scan menu, select your internet box then enter the WIFI password.
- Reconnect your smartphone to the WIFI network of your internet box.
This symbol indicates the link wireless as well as the strength of the signal.
NETWORK INFO:
In this menu, you’ll find all information about the network: type of network,
IP address, Mask, Gateway, DNS…
LANGUAGES:
This menu allows you to select the language of all menus. You can choose
between English, German, Spanish, French, Italian, Nederland, Russian, and
Polish.
FIRMWARE UPDATE:
This menu allows toys to make and update your appliance. Select “Check for
update” some time to time. If there is no update, the display will show “No
new updates”.
If an update is available, the devices will automatically launch it. This may
take several times so let the device run until it starts again.
VERSION:
This menu displays the software version installed on the device.
FACTORY RESET:
This menu allows you to restart the device with the factory settings. If you
press it, the appliance will start again and in the English version. Note that
some menus will be refreshed such as PlayQueue or the Favorites Internet
radios.
STREAM AUDIO QUALITY:
This menu allows you to choose the quality of the audio files between 24
bits/192 kHz or 24 bits/96 kHz.
In the case of low internet, bandwidth prefers 24 bits/96 kHz quality to avoid
any cuts during reading files.
DISPLAY
This menu allows you to choose the intensity of the display between Off, Low,
Medium, or High.
If you select “Off“ the display will always get off after a few seconds. The
display will always get on while pressing any keys or buttons.
This function is also available directly from the key DISP (37) of the remote
control.
POWER MANAGEMENT:
This menu allows to choose the standby timeout:
– When the device is not working (choice between 5,10, 15, or 30 minutes).
– When the device is working (choice between 1, 8, or 24 hours).
PLAYLISTS
This device allows you to create Playlists with all music tracks or albums
that are available in your network.
Note that it is not possible to add tracks from Streaming services to those
Playlists.
You have 3 different menus available:
Play queue: The PlayQueue is a temporary playlist where you can place all
tracks one after the other. The places of each track can be changed in the
queue line.
Select a track (present on the network or on any medium connected to the front
or rear USB inputs).
Note: All tracks placed in this playlist will be deleted if the device is
switched off.
Playlists: Vous pouvez créer des listes de lecture spécifiques.
You can create all kinds of playlists.
Press on “Create new playlist“, name it, and press “OK”. All Playlists will
appear in the menu.
You’ll be able to put all tracks in any playlist of your choice.
With the app, you can change the name of them, activate a random or repeat
play, cancel it or add it to a collection.
Collection: A collection allows you to gather one or several Playlists.
First, create a collection and then with the app choose a playlist and add it
to a collection.
Note: If your device is not connected to the network or if the source of
music (computer, NAS…) is not linked to the network, tracks won’t be readable.
To remove a track or radio from Favorites, select it and then press on REM FAV
(40) of the front panel.
INTERNET RADIO
This menu allows to access about 100 000 radio stations and also to podcasts.
Favorite: This menu offers the possibility to have a selection of radios
easily accessible.
While playing a radio, you can add it to Favorites by pressing ou directement
Avec le bouton :
To remove the radio from Favorites, press again on .
Those functions are directly accessible also from the remote control with keys
ADD FAV and REM FAV (40).
It is possible to choose also radios with other criteria:
History/Recommendations/Local stations/Popular stations/Trending/High
quality/New stations/Filter/Search/Podcasts.
If you want to search a station by location, by language, or by genre, select
“filter”.
Podcasts: This menu allows you to get a selection of podcasts available:
Favorites/History/popular podcasts/Trend/Filter/Search.
FRONT USB/REAR USB
Select one of those inputs to read all music files from a USB key or Hard
Disk.
Readable files system can be FAT32, NTFS, EXT 2/3/4.
MEDIA SERVER
This menu allows you to get access to all the music files on your network.
While entering this menu, you’ll find all different sources available in the
network (could be NAS, computer, router…).
While selecting them, you’ll have the choice of Music/photo/video.
Only music files can be read on this device.
Music: You can select music files depending on several criteria: (note
that this is depending on the information placed on the original files).
Selection can be done: Files/All music/Playlists/Album/Artist/Genre/Composer.
Placing tracks in “Playlists” is always possible while pressing keys.
STREAMING SERVICES
You can access Spotify from ATOLL Signature App: Use your phone, tablet, or
computer as a remote control for Spotify. Go to
spotify.com/connect to learn how.
The Spotify Software is subject to third-party licenses found here:
https://www.spotify.com/connect/third-party-licenses.
You also have direct access from the app to those streaming services:
Qobuz/Tidal/Deezer
On first use, you will have to enter your login and password.
For Tidal use the ATOLL Signature App.
Press on Username, fill it, and valid by pressing OK.
Press on Password, fill it, and valid by pressing OK. Finally, press “log in”
to valid.
Once your account is valid, you’ll be able to get access to all services
related to your account:
– Playlists that could be created.
– Favorites (albums, tracks, artists).
– Purchases (by albums or tracks).
BLUETOOTH®
Your device can receive audio files with a Bluetooth® connection from a
smartphone, tab, or computer.
First association: Go on the Bluetooth® menu of the Streamer and activate
Bluetooth® on the source device. Then select the ATOLL streamer on your source
device. This device name should appear on the display (ATOLL Signature by
default). On the streamer, select your device and then press “Play”.
From this moment, all audio files from your device will be played on the
streamer.
Your source device will be connected as soon as the streamer will stay On. You
can disconnect your device by pressing “Disconnect”.
Associate another device: Before connecting a new device, disconnect the
previous one. Run the Bluetooth® connection of the new device then go again on
the Bluetooth® menu of the streamer and connect it.
The quality of reception of the signal can be dependent on the power of the
Bluetooth® emitter and the distance between the 2 devices. Avoid being up to
more than 5 meters of your SDA for a correct reception without any risks of
signal cuts.
PREAMP/BYPASS FUNCTIONS
Your appliance can be used as a preamplifier allowing you to manage the volume
control and selection of the different sources. It can also be used as a
single source (BYPASS-led switch on).
CONNECTION:
As a preamplifier, the streamer can be directly connected to a power
amplifier. In that case, ensure you never turn your device on BYPASS mode.
(Check scheme p6)
To use the streamer as a preamp on BYPASS mode, press key BYPASS (39) on the
remote for about 4 seconds. You can do the same directly from the front panel
while pressing about 4 seconds on keys VOL + & (21).
VOLUME:
Volume management is done through the keys (21) of the front panel or on the
remote control. The volume level is displayed for a few seconds on the
display. The level is always shown at the top of the display.
The volume at zero corresponds to a complete “mute” of the device with the
switching of the output relay.
Particular case: Affect line1 or line2 as the only BYPASS input (for home
cinema system insertion):
In PRE-AMP mode you can choose to assign a line input (line1 or line2) as an
exclusive bypass input. Simply select one of these inputs and then activates
the bypass mode, inputs remain in preamp mode except for that particular line
input.
SOURCES:
Your appliance has 6 inputs:
– Line 1
– Line 2| – Coaxial 1
– Coaxial 2| – Optical 1
– Optical 2
---|---|---
These sources can be renamed from the ATOLL Signature application:
Settings/Rename local inputs.
NB.: selected source always follows on the display of (*).
APPLICATIONS
A free application for iPad, iPhone, and Android is available to drive your
Streamer named ATOLL Signature. You can download it freely online.
As a first step, make sure that your Smartphone is well connected to WIFI on
the same network as your Streamer. In this case, your device will appear on
the screen of your Smartphone just after starting the application, just select
it.
The application will resume the data displayed on the screen of the Streamer:
logo of the radio station, audio, volume, covers of albums, and images.
You can navigate through the menus and adjust the analog volume level.
Our applications can be regularly updated so can be improved in their
functionalities.
It is also possible to control your network drive from a computer screen by
typing in the search bar of your internet browser the IP address of your
network drive followed by/WebClient: 192.168.xxx.xxx/WebClient
The IP address of your network drive is available in the “Settings/Network
info” menu.
It is also possible to rename your network drive by typing only the IP address
of the latter in the search bar of your internet browser.
“SEARCH” OPTION:
When you need to search for a special track or radio, you’ll need to press
“Search”, then “Searching for”, then indicate it, valid while pressing “OK”
and then press “Search”.
On music web services ( Tidal, Qobuz, Deezer ) you can add filters to your
research (All/Title/Albums/Artists/Playlists). Use your phone, tablet, or
computer as a remote control for Spotify.
TROUBLESHOOTING TABLE
Problem encountered | Possible Solutions |
---|---|
No sound. | – Check your RCA connections. |
– Have you selected the correct source?
– The volume might be at zero level.
Impossible to access the Network.| – Enter the WAP key again.
– Make sure that the antenna is the supplied template (male connector) and
that it is well screwed on its base.
No recognition of the USB stick.| – Check if the format is compatible.
Frequent loss of the WIFI network.| – Make sure your box and your Streamer are
not confined or too far apart.
– Choose a wired connection or with Powerline adapters for example.
The device stops responding.| – Press 2 times on key HOME (24).
– Turn off the power switch level before restarting.
WARRANTY ~ MS120
to present to your dealer and to join with your purchase invoice when sending
back the appliance to the service center or the address below:
ATOLL ELECTRONIQUE®
Bd des Merisiers
50370 BRACEY
FRANCE
WARRANTY CONDITIONS
This device was made to give you complete satisfaction.
ATOLL Electronique warranty is two years from the date of purchase of the
equipment, date, and stamp of the seller being authentic. We recommend you
keep your proof of purchase (invoice) with this coupon properly filled.
The warranty, as well as the terms of service, should be specified at the time
of purchase by your dealer who will advise you, in case of faulty behavior or
failure.
This warranty covers labor and replacement of parts acknowledged to be faulty
and not their normal wear and tear caused. Devices with traces of disassembly,
drop, immersion, or abnormal voltage or any cause of degradation in the
appliance and damage resulting from use contrary to the indications included
in the operating instructions, automatically lose the benefit of the
guarantee.
Date of purchase:
Place of purchase:
Buyer signature:
Dealer’s Stamp
ATOLL ELECTRONIQUE® is a French Company that designs, manufactures, and commercializes all its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>