ATOLL ELECTRONIQUE AV100 3 Channel Power Amplifier Owner’s Manual
- June 5, 2024
- ATOLL ELECTRONIQUE
Table of Contents
ATOLL ELECTRONIQUE AV100 3 Channel Power Amplifier
INSTRUCTIONS
CAUTIONS
- Do not make any connections when your device is powered on.
- Put your device in a dry and well-ventilated place, far from a source of heat.
- Avoid putting something on your amplifier.
- Strictly respect polarity + & , as well as the left and right connections.
- Avoid any short-cut.
- Do not plug-in two speakers in parallel on the same output.
ADVISES
- To optimize the performance of your device, you should switch it on at least half an hour before any listening, the time for the power stage to reach its ideal working temperature.
- Your device will give you optimal listening quality after this time-lapse.
- Between two uses, it is, therefore, preferable to let the device on so that it remains at its optimum temperature.
- At night or when you leave your home, it is best to use the main switch to turn off the device.
- To optimize the sound quality of your system, we recommend that you choose good-quality connection cords. Do not hesitate to ask your specialist dealer for advice.
- Your amplifier is equipped with a temporized switch on. A relay protects loudspeakers on the output power stage from over-voltage.
CONNECTING
- Ampli In (Right, Center, and Left).
- Ample Out (Right, Center, and Left): use it to connect another power amp or a subwoofer.
- Right channel output + & .
- Center channel output + & .
- Left channel output + & .
- Trigger input(*) (optional).
- Power plug.
- Power switch.
- Signal de mise sous tension.
TROUBLESHOOTING
E.C. MARKING
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE, and national transpositions.
GUARANTEE
The guarantee is two years long from the date of purchase. We recommend you to ask your dealer to fill the guarantee and to conserve it. The guarantee is only available for appliances that have been used correctly.
MAINTENANCE
Before any cleaning, switch off your device. Use a soft and dry rag to clean up the appliance. Never use acetone, white-spirit, ammoniac, or any kind of product containing an abrasive agent. Never try to clean up inside the appliance.
TECHNICAL DATA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>