ATOLL DAC100 SIG DAC Converter Owner’s Manual
- June 5, 2024
- ATOLL
Table of Contents
ATOLL DAC100 SIG DAC Converter
INSTRUCTION
CAUTIONS
- Do not make any connections when your device is powered on.
- Put your device in a dry and well-ventilated place, far from a source of heat.
- Do not put something on your converter.
- Do not make any plug-in when the converter is on.
- Avoid any short-cut.
ADVISES
- To optimize the performance of your device, you should switch it on at least half an hour before any listening, the time for the power stage to reach its ideal working temperature.
- Your device will give you optimal listening quality after this time-lapse.
- Between two uses, it is, therefore, preferable to let the device in the standby position so that it remains at its optimum temperature.
- At night or when you leave your home, it is best to use the main switch to turn off the device.
- To optimize the sound quality of your system, we recommend that you choose good-quality connection cords. Do not hesitate to ask your specialist dealer for advice.
- To avoid any parasite sounds coming from some softwares, we recommend you to unplugged the USB cable from your computer when not using it.
CONNECTING
Reminder: do not make any connections when your device is turned on.
-
Analog output (Left & Right).
-
Digital output (coaxial).
-
Digital output (optical).
-
Input #3 (coaxial).
-
Input #3 (optical).
-
Input #2 (coaxial).
-
Input #2 (optical).
-
Input #1 (coaxial).
-
Input #1 (optical).
-
USB Input (B type).
-
General power plug.
-
ON/OFF Switch.
DETAIL OF FUNCTIONS
-
Inputs selection keys.
-
USB input indicator signal.
-
Input 1 indicator signal (coax. or optical).
-
Input 2 indicator signal (coax. or optical).
-
Input 3 indicator signal (coax. or optical).
-
Stand-by indicator signal.
-
ON/OFF key.
REMOTE CONTROL
The converter DAC100 Signature can be used with the ATOLL remote control that will let you:
- Put ON/OFF the converter.
- Select the sources: with keys SEL + & , you can select the different inputs.
- Adjust the volume level: with keys VOL + & , you can attenuate the level to 0 : while pressing the keys + or , led indicator (17) twinkles.
Putting the converter in Stand-by mode will not change the sound level. This level will be reinitialized at its highest level if the converter is switsh off (11).
USB INPUT
Your appliance is equipped with a High-Res. asynchronous USB Input (B type).
It will be possible to use it only when you’ll have downloaded the appropriate
driver on your computer. This driver can be freely downloaded on our website
at the page: http://www.atoll-electronique.com/fr/produits/convertisseur-dac
/convertisseur-dac200/
You will find attached an explanatory guide on how to install this driver.
This driver is not required for Macintosh computers. In order to avoid
problems with high quality format transfers (24 bits / 192 kHz or DSD), it is
recommended to use a USB connection cable with ferrite.
ACCEPTED FORMATS
- Accepted format on optical and coaxial Inputs: 16-24 bits (32 kHz, 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz and 192 kHz).
- Accepted format on USB Input:
- DSD: DSD64 & DSD128.
- CM : 16-24 bits (32 kHz, 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz, 176,4 kHz, 192 kHz, 352,8 kHz et 384 kHz).
E.C. MARKING
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE and national transpositions.
GUARANTE
The guarantee is two years long from date of purchase. We recommend you to ask your dealer to fill the guarantee and to conserve it. The guarantee is only available for appliance which have been use correctly.
CLEANING
Before any cleaning, switch off your amplifier (11). Use a soft and dry rag to clean up the appliance. Never use acetone, white-spirit, ammoniac, or any kind of product containing abrasive agent. Never try to clean up inside the appliance.
TECHNICAL DATA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>