digitech MB3641 Headphone Holder with Qi Wireless Charger Instruction Manual
- June 6, 2024
- Digitech
Table of Contents
Headphone Holder with Qi
Wireless Charger
Model: MB3641
Instruction Manual
PRODUCT INTRODUCTION
This Headphone Holder with Qi Wireless Charger is made of high-quality materials and charges up to 10W. Compact and elegant it provides a convenient wireless charging experience.
PRODUCT APPEARANCE
PRODUCT APPEARANCE
| Input: | 5V/1A, 5V/2A (Max), 9V/1.1A (Max) |
|---|---|
| Power: | 5W / 7.5W / 10W |
| Charging Distance: | 4 – 10mm |
| Charging Efficiency: | ≥72% |
COMPATIBILITY
- Headphone Size: The vertical size of the bracket from the top to the bottom is 9 inches, suitable for most headphones.
- Built-in Qi wireless charger is suitable for smartphones with wireless charging compatibility.
PRODUCT INSTALLATION
PRODUCT DIAGRAM
| 1 | Headphone Holder |
|---|---|
| 2 | Supporting Pole |
| 3 | Micro USB Input |
| 4 | LED Status Light |
| 5 | Qi Wireless Charging Area |
| 6 | Base |
FUNCTION INSTRUCTIONS
- Insert the USB cable into the Micro USB Port and connect an external power supply, then place the device that needs to be charged on the charging area as below:
- Led light display area: When the device is powered, the LED light shows red color. When the mobile phone is charging, the light will show blue color.
BOX CONTENTS
1 x Headphone Holder with Qi Wireless Charger
1 x Micro USB Charging Cable
1 x User Manual
ATTENTION
- Keep the stand and device clean and tidy.
- When cleaning the stand, make sure that it is disconnected from power.
- Keep away from water and other liquids.
Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.electusdistribution.com.au
Made in China
Read User Manual Online (PDF format)
Loading......