Lrecat J52 Wireless Earbud Instruction Manual
- June 3, 2024
- Lrecat
Table of Contents
**Lrecat
J52 Wireless Earbud
Instruction Manual
Please read the instructions before use**
J52 Wireless Earbud
ACTIVATE WARRANTY
Permanent replacement of damaged, defective item or missing components.
Please activate via email below within 1.5 days.
motastservice@gmail.com
connect
- Open the lid (Earbuds auto power on)
- After open the phone Bluetooth, Click the
to Pairing
Reset
- Delete the BT pairing information on the phone.
- Take the earbuds into the charging case.
- Close the lid to charge the earbuds.
- Take out the earbuds and wait for 20 seconds.
(If the above operation does not work, please try again)
Operation
Xl: Click Once
X2: Click 2 times
****2S: Press and hold for 2 seconds
Problem handling
-
Can be connected but there is no sound:
Click the right earbuds to increase the volume. -
One of earbuds cannot be charge:
Clean the charging contact of the earbuds and the charging case. -
One of the earbuds cannot be connected:
Reset the earbuds.
If you cannot solve the problem, please contact us in time.
Please clean the charging contacts of the earbuds and charging case frequently
to avoid charging failures.
Specifications
Bluetooth version: V5.3
Maximum transmission range: <15M
Working temperature range: -10°C-45°C
RF Sensitivity: -90dBm Operating frequency: 2.40-2.48GHZ
Bluetooth profiles supported: HFP,HSP,A2DP,AVRCP
Music playing time:About 6-8h
Charge time: Around 1 hour
Battery capacity: 2*3.7V/30mAh
Package
2Bluetooth Earbuds
1Charging Case
lType-C Cable
1User Manual