anko LD17301SM K Led Wire Lights Instructions

anko LD17301SM K Led Wire Lights

Product Specifications

• Product Name: LV 300 LED Wire Lights
• Model No.: LD17301SM K: 43447183 / T: 70027075
• Length: 5m
• Total LEDs: 300

FAQs

Q: Can I use these lights outdoors permanently?

A: No, these lights are not designed for permanent or long-term outdoor use. They should be installed indoors and kept away from extreme wet weather.

Q: What should I do if the bulbs are damaged?

A: If any bulbs are damaged, do not use the light chain. Contact customer support for assistance with bulb replacement.

Q: Can I connect multiple sets of lights together?

A: It is not recommended to overload power sockets or extension leads. Each set should be used within its specified limits to prevent damage and ensure safety.

OVERVIEW

Product Usage Instructions

Warnings:

• The light chain is suitable for INDOOR AND OUTDOOR USE.
• This product is NOT designed for permanent or long-term use.
• The LED driver MUST be installed INDOOR away from the weather.
• The LED driver is suitable for the operation of LED Modules only.
• Only operate this light chain with the LED driver, ModelNo.JT-DC5V3.6W-H5
• Do not connect this light chain electrically to another light chain.
• Do not operate the product while it is in the packaging.
• DO NOT attempt to replace the non-replaceable bulbs in this light chain.
• Never allow any part of the set to come into contact with a source of heat or flame.
• Care must be taken to avoid damage to the cable or fittings.
• If any part of the light set or cable is damaged, the light set MUST be discarded.
• This product is for use as a decoration only. Not to be used by children as a toy. Keep out of reach of children.
• Do not position this light chain where it will be exposed to extreme wet weather or submerged in water.
• Always switch off this light set or unplug an adaptor if unattended.
• DO NOT overload power sockets or extension leads.
• DO NOT pierce the cable when securing in place, bend, or stand on the light chain, as this will damage the bulbs or wiring.
• Please refer to the packing or product rating label for product class, specifications andrating.

Adaptor Manual

• Please use the equipment according to the rated voltage and current.

Model No.

| Input Rated| Output Rated
---|---|---
Voltage| Frequency| Current| Voltage| Power
JT-DC5V3.6W-H5| 220-240VAC| 50-60Hz| 0.12A Max| 5VDC| 3.6W

• Do not open the cover of the equipment.
• For use with LED lighting equipment.
• The input and output voltage should be checked before use to ensure correct use.
• This is a Class II product, only for indoor use.
• The product is not a toy, keep it where children cannot reach it.
• The lamp controller does not rely upon the luminaire enclosure for protection against accidental contact with live parts.
• If applicable: an indication that the controller is suitable for operation with LED modules.
• Do-not-cover classification

The LED driver that can be used where normally flammable materials. including building insulation are or may be present, but cannot be abutted against any material and cannot be covered in normal. Minimum clearance distance from the top and sides of the control gear to the normally flammable building element is 75mm; as shown in the below picture, A=B=C=Min.75mm.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>