soundcore Life P3i Hybrid Earbuds User Manual

Life P3i Hybrid Earbuds

Specifications

• Input: 5 V 0.5 A

• Rated Output Power: 5 mW (@1% THD)

• Battery Capacity: 55 mAh x 2 (earbuds); 500
  mAh (charging case)

• Charging Time: 2 hours

• Playtime: Up to 9 hours (Total 36 hours with
  the charging case)

• Driver Size: 10 mm x 2

• Frequency Response: 20 Hz – 20 kHz

• Impedance: 16 ohms

• Waterproof Level (Earbuds): IPX5

• Bluetooth Version: 5.2

• Bluetooth Range: 10 m / 33 ft

Product Usage Instructions

Charging

1. Place the earbuds in the charging case and close it.
2. Connect the charging case to the power supply using a USB-C
   charging cable. The LED indicator on the charging case will show
   the charging status.

Wearing

1. Choose the EarTips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears and gently
   turn them until you find the most comfortable and secure
   position.

Powering On/Off

• To turn on: Press the button once.
• To turn off: Press and hold the button for 2 seconds.

Bluetooth Pairing

1. Open the charging case, and the earbuds will automatically
   enter Bluetooth pairing mode.

Controls

• Play/Pause: Press once (R)
• Next track: Press twice (R)
• Volume up: Press once (R)
• Volume down: Press once (L)
• ANC: Press and hold for 2 seconds (R/L)

Soundcore App

Download the Soundcore App to customize the user interface,
adjust EQ, switch ANC modes, update firmware, and explore more
features.

Reset

1. Place the earbuds into the charging case and keep the case
   open.

2. Press and hold the button on the case for 10 seconds until the
   LED indicator flashes red 3 times. This indicates a successful
   reset.

Frequently Asked Questions (FAQ)

Q: How do I know if the earbuds are fully charged?

A: The LED indicator on the charging case will show a solid
green light when the earbuds are fully charged.

Q: Can I use only one earbud at a time?

A: Yes, you can use either the right or left earbud
independently in Mono Mode by following the specific controls for
each earbud.

Q: Is it safe to use the earbuds in the rain?

A: The earbuds have an IPX5 waterproof rating, which means they
are protected against water splashes and sweat. However, it is not
recommended to submerge them in water.

Soundcore Life P3i
USER MANUAL

Charging

· Fully dry off the earbuds and the USB port before charging. · Use a certified USB-C charging cable and charger to prevent any damage.
· Fully charge both the earbuds and the charging case before the first use.
1. Place the earbuds in the charging case and close it.
2. Connect the charging case to the power supply by using a USB-C charging cable. The LED indicator on the charging case indicates the charging status.

1

2

Wearing

1. Choose the EarTips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.

1

2

SML
· Your earbuds come with 3 pairs of EarTips, among which Medium-sized are pre- installed. 01 EN

Powering On/Off

· Open the charging case, the earbuds will automatically power on. · To power off, place the earbuds into the charging case and close it.

ON

OFF 1

2

· The earbuds will automatically power off after 10 minutes if no device is connected.
· To manually power on, press and hold the multi-function button on both earbuds for 3 seconds.

Bluetooth Pairing

1. Open the charging case, the earbuds will automatically enter Bluetooth pairing mode.
· The LED indicator on the charging case will flash white.
2. Select “Soundcore Life P3i” on your device’s Bluetooth list to connect. · When successfully connected, the LED indicator on the charging case will turn off.

1

2

PAIRING CONNECTED

Soundcore Life P3i

Soundcore Life P3i

· Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the case for 3 seconds until the LED indicator on the charging case flashes white.
· Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
02 EN

· Mono mode: When Bluetooth connected, you can use either one of the earbuds only by placing the other one into the charging case.
· When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
· When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.
Controls

Play/Pause Next track Volume up Volume down ANC

Press twice (R) Press twice (L) Press once (R) Press once (L) Press and hold for 2 seconds(R/L)

Answer a call End a call Reject a call
Mono Mode Play/Pause End a call Volume Up Answer a call Reject a call Activate Siri or other voice assistant software

Press once(R/L) Press twice(R/L) Press and hold for 2 seconds(R/L)
Press twice Press once
Press and hold for 2 seconds

03 EN

Soundcore App
Download the Soundcore App to customize the user interface (e.g. adjust volume, control playback, activate Siri), adjust EQ, switch ANC modes, update firmware, and explore more.

Reset

· You might need to reset the earbuds if you experience any connectivity problems or function issues.
1. Place the earbuds into the charging case and remain the case open.
2. Press and hold the button on the case for 10 seconds until the LED indicator on the charging case flashes red 3 times. This confirms that the reset was successful and your earbuds can be connected normally.

1

2

×3
10s
04 EN

Specifications

Specifications are subject to change without notice.

Input Rated output power
Battery capacity
Charging time Playtime (varies by volume level and content) Driver size Frequency response Impedance Waterproof level (Earbuds) Bluetooth version Bluetooth range

5 V 0.5 A
5 mW (@1% THD) 55 mAh x 2 (earbuds); 500 mAh (charging case) 2 hours Up to 9 hours (Total 36 hours with the charging case) 10 mm x 2
20 Hz – 20 kHz
16 IPX5 5.2
10 m / 33 ft

05 EN

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>