ATTACK SHARK R2 ltralight Wireless Gaming Mouse User Guide

ATTACK SHARK R2 ltralight Wireless Gaming Mouse

Thank you very much for choosing our products. We hope it can bring you a brand new operation and experience. At the same time, we look forward to receiving your valuable suggestions on our products. We will continue to provide you with better products and services.

Product Introduction

1. Product model: R2
2. Product interface type: USB-Type-C
3. Product connection method: USB, 2.4G, Bluetooth
4. Product optical sensor: Pixar PAW3950
5. Transmission frequency: 2402MHz-2480MHz
6. Report rate (HZ:
   • 2.4G mode: 125/ 250/ 500/ 1000 (default)/ 2000/ 4000/ 8000HZ (driver adjustable)
   • Wired mode: 125/ 250/ 500/ 1000HZ default (driver adjustable)
   • Bluetooth mode: 125HZ
7. Frame rate (IPS): 750IPS
8. Maximum acceleration (G): 50G
9. DPI value and corresponding color: 1200 (red) -2400 (green) -3200 (blue) -5600 (yellow) -8000 (light blue) -42000 (purple)
10. Charging current: 100mA
11. Charging voltage: 5V
12. Product weight: ≈45‡2g
13. Product size: 119.56136.3mm
14. Data line interface (length): Type-C/1.6 meters
15. Wireless transmission distance: 10 meters
16. Switch brand and service life: OMRON Optical Microswitches(100 million times)
17. Support operating systems: XP, Win7, Win8, win10, win11, Mac OS, Android, Linux, etc.
18. Sleep mode current: 60uA

PACKING LIST

• Mouse*1
• 2.4G Receiver*1
• Cable*1
• Instruction Manual*1

Key Function Description

Tips:

1. Sleep mode: The mouse enters sleep mode after stopping working for 30 seconds
2. Sleep wake-up method: mobile wake-up
3. Hardware connection: Insert the product USB plug USB 1.1 or above port (when the product is used for the first time, a prompt will pop up in the lower right corner of the computer to automatically install the hardware)

Connection mode

1. Bluetooth connection method:
2. The power switch must be in the Bluetooth stage, and the Bluetooth mode light is green and blue;
3. Short press the ” 8″ key to select the Bluetooth channel. When BT1 is selected, the Bluetooth channel light flashes green slowly. When BT2 is selected, the channel light flashes blue slowly;
4. Long press the ” 8″ key for about three seconds, the Bluetooth channel 1 mode light will flash green quickly. At that time, please turn on the Bluetooth of your mobile phone or other devices that need to be paired to search. When “R2 Mouse1″ appears, please connect in time. After the connection is successful, the pairing light will light up in cyan for about 2 seconds and then go out; Long press the ” 8″ key for about three seconds, the Bluetooth channel 2 mode light will flash blue quickly. At that time, please turn on the Bluetooth of your mobile phone or other devices that need to be paired to search. When “R2 Mouse2” appears, please connect in time. After the connection is successful, the pairing light will light up in blue for about 2 seconds and then go out.

2.4G Connection method:

1. When you want to use the 2.4G channel of the mouse, turn the power switch to the 2.4G position and the red light flashes. Then take out the 2.4G receiver of the mouse and plug the receiver into the idle USB port of the computer. The computer will automatically install the configuration software. When the computer prompts that the installation is complete and it can be used, the red light will be on for 1S, and the mouse can be connected to the computer. If the computer does not respond after plugging in the receiver, you need to change to another USB port. At this time, the computer will automatically match the code and install the corresponding adapter software. Generally, the computer will prompt: The installation is complete and it can be used, which means that the mouse is successfully connected to the computer 2.4G.
2. If the 2.4G signal finds a connection obstacle or the signal is lost, turn the power switch to the 2.4G position, and then press and hold the ” 8″ key for about three seconds. The 2.4G channel light will flash red quickly, then take out the 2.4G receiver of the mouse and plug the receiver into the idle USB port of the computer. When the pairing is successful, the light will be on red for 2 seconds and then go out, and the mouse can be used normally. If pairing fails within 120 seconds, please repeat the above steps.

Wired mode connection method:

Use the TYPE-C cable provided to connect to the computer. When the cable is plugged in, the mouse will default to wired mode. When the mouse is moved, the computer screen pointer can move and the mouse can be used normally.

Precautions

• Do not soak the mouse in liquid or sprinkle it with liquid
• Do not use the mouse in high temperature and high humidity environment
• Do not place the mouse in open flame
• Do not violently crush the mouse
• Do not disassemble the mouse

Manufacturer: Shenzhen LexonTech Trading Co., Ltd.
Address: Room 604, Building C, Kemulong Science and
Technology Park, No.5 Guansheng 5th Road, Luhu Community, Guanhu Street, Longhua District, Shenzhen, China 518000 Made in China

UK REP

• UNAL KURT
• 12 Custance Walk York YO23 1BX
• United Kingdom
• Phone: (+44)0753 623 9035
• Mail: gavincheng2011@hotmail.com

EC REP

• Apex CE Specialists GmbH
• Habichtweg 1 41468 Neuss Germany
• Info@apex-ce.com
• +353212066339

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>