ATTACK SHARK PAW3395 X3 49g Triple Mode Light Weight Mouse User Manual

ATTACK SHARK PAW3395 X3 49g Triple Mode Light Weight Mouse

Thank you very much for purchasing our  product, and hope it can bring you a new operation and feeling. At the same time, we look forward to getting your valuable suggestions on our products, and we will continue to provide you with better products and services.

PRODUCT DESCRIPTION

1. Product model : X3
2. Product interface type : USB-Type-C
3. Product connection method : USB, 2.4G, Bluetooth
4. Product optical sensor: original phase PAW3395
5. Transmission frequency : 2402MHz – 2480MHz
6. Return rate (HZ): 125/ 250/ 500/ 1000HZ default (drive adjustable)
7. Frame rate (IPS) : 650IPS
8. Maximum acceleration (G): 50G
9. DPI value and corresponding color: 800 (red)- 1600 (green)- 2400 (blue) -3200 (cyan)- 5000 (yellow)- 26000 (purple)
10. Charging current : 280mA
11. Charging voltage: 5V
12. Product weight: 49g‡3g
13. Product size : 118.56139.7mm
14. Data cable interface (length): Type-C/ 1.5 meters
15. Wireless transmission distance: 10 meters
16. Switch brand and service life: Kaihua 80 million times
17. Support operating system: XP, Win7, Win8, win10, win 11, Mac OS, Android, Linux etc.
18. Sleep mode current: Light sleep (=0.3mA), deep sleep (=60uA)

BUTTON FUNCTION DESCRIPTION

1. Left button
2. Right click
3. Middle button
4. Forward key
5.  Back key
6. DPI cycle
7. Short press the Bluetooth channel switch / long press the 3 seconds to force the code key
8. Power Toggle (2.4G-OFF-Bluetooth)
9. Receiver storage compartment
10. Type-C interface
11. Indicator lights: charging (purple), low voltage (flashing red), fully charged (green light is always on)
12. DPI indicator light (turn off after 5 seconds)
13. Mode indicator light: 2.4G (red), X3-5.2 (green), X3-5.4 (blue) Short press to switch Bluetooth channels, long press for 3 seconds to force code pairing
14. DPI: 800(red)- 1600 green (default)- 2400 (blue)- 3200 (can)- 5000 (yellow)- 26000(purple)

Tips:

1. Sleep mode
2. The mouse immediately enters a light sleep after it stops working.
3. The mouse enters deep sleep without any operation for 10 minutes.
4. Sleep wake-up method
5. Light sleep, wake up by moving.
6. Deep sleep, press key to wake up.
7. Hardware connection: Insert the USB plug of the product into the port of USB 1.1 or above (when the product is used for the first time, the bottom right corner of the computer will pop up an automatic hardware installation prompt).

CONNECTION MODE

Bluetooth connection method:

1. The power toggle must be in the Bluetooth position, and the Bluetooth mode lights are green (BT1) and blue (BT2).
2. Short press the • button to select the Bluetooth channel. When BT1 (version 5.2) is selected, the Bluetooth channel light of BT1 will flash green, and when the channel of BT2 (version 5.4) is selected, the BT2 channel light will flash blue;
3. Press and hold the button for about three seconds, the bluetooth channel 1 mode light will flash green quickly, then please turn on the bluetooth of the mobile phone or other devices that need to be paired to search, when “X3-5.2 mouse” appears, please connect in time and pair the code After success, the mode light turns green for about a second, and then goes out;
4. Press and hold the button for about three seconds, and the Bluetooth channel 2 mode light will flash blue quickly. At that time, please turn on the Bluetooth of the mobile phone or other devices that need to be paired to search. When “X3-5.4 mouse” appears, please connect in time. After the connection is successful, the pairing light will stay on in blue for about 1 second, and then turn off.

Wired mode connection method: Use the included TYPE-C cable to connect to the computer. When the cable is plugged in, switch the mouse to “OFF” for wired mode. Move the mouse and the computer screen pointer can move, and the mouse can be used normally.

2.4G connection method:

1. Turn the switch to 2.4G
2. Take out the receiver
3. Plug the receiver into the computer USB port The computer will automatically install the configuration software

• If there is no response when plugging in the receiver computer, replace another USB port

!If the connection is blocked or the signal is lost, please repeat steps 1, 2, and 3. Then code again.

Code matching method:
Press and hold the code button for about three seconds, the 2.4G channel light will flash red quickly. When the pairing is successful, the light will be steady red for 1 second and then turn off, and the mouse is in normal use.

PRECAUTIONS

• It is forbidden to immerse the mouse in liquid or spray the mouse with liquid
• It is forbidden to use the mouse in high temperature and high humidity environment
• Do not place the mouse in an open flame
• Violence against pressing the mouse is prohibited
• Do not disassemble the mouse

PACKING LIST

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>