ATTACK SHARK K86 Wireless Keyboard Instruction Manual

ATTACK SHARK K86 Wireless Keyboard Instruction

Product Information

Specifications

• Compliance: Part 15 of FCC Rules
• Operating Conditions: Uncontrolled environment
• Radiation Exposure Limits: FCC approved
• Minimum Distance: 0cm between radiator and body

Product Usage Instructions

Caution
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It is important to install and operate the equipment with a minimum distance of 0cm between the radiator and your body.

FAQ (Frequently Asked Questions)

• Q: What happens if I make changes to the device without manufacturer approval?
  A: Making changes or modifications to the device without explicit approval from the manufacturer may void your authority to operate the equipment.

• Q: What does it mean that the device complies with part 15 of the FCC Rules?
  A: Compliance with part 15 of the FCC Rules ensures that the device meets the standards for electromagnetic interference and does not cause harmful interference to other devices.

• Q: Can the device be used in any environment?
  A: The device is designed for use in an uncontrolled environment and complies with FCC radiation exposure limits. However, it is important to ensure a minimum distance of 0cm between the radiator and your body.

Thank you very much for purchasing our product, and hope it can bring you a new operation and feeling. At the same time, we look forward to getting your valuable suggestions on our products, and we will continue to provide you with better products and services.

Quick Start Guide

1. Three-stage switch: Bluetooth/ Wired
2. Type-c interface
3. Caps/ WIN lock/ battery/ light

Compatible System
It can run on computer Windows, MACOS, and mobile phone systems or computers with Bluetooth versions.

Sleep

• In the wireless mode, release the button for 3 minutes to enter the standby mode, the backlight of the keyboard is off, and it lights up when you press any key; when the key is pressed to wake up the keyboard, the key value must trigger the function.
• In wired mode, the keyboard does not sleep. Stand by for 30 minutes to enter sleep; the First keystroke invalidates and wakes up the keyboard. The second key value is valid.

Battery Indicator

• In wireless mode, when the battery voltage is lower than 3.3V, the low voltage indicator light flashes (in low voltage state, the red light flashes slowly to remind until the battery is out, and the keyboard stops working.
• In the charging state, the red light is always on. In the full state, the red light is off When plugged in for corded charging, normal use can be resumed.

Bluetooth connection

Bluetooth mode : turn the three-segment switch to the far right.
There are three Bluetooth channels: Short press FN+I: Bluetooth 1 FN+2: Bluetooth 2 FN+3: Bluetooth 3.
Turn on the device that needs to be paired for Bluetooth pairing, and the keyboard can be used normally after pairing is successful. When multiple Bluetooth devices are connected at the same time, short press the corresponding Bluetooth button to switch the Bluetooth device to use. (Long press the corresponding Bluetooth key for Bluetooth pairing, and the red\blueWellow indicator light flashes quickly, and the indicator light stays on for 2S after connecting. If the device is not connected, the indicator light turns off and the keyboard enters sleep.)

Wired connection

Wired mode : first insert the cable into the TYPE-C interface, and then connect the Other end to the computer, turn the three-position switch to the middle, and the keyboard can be used normally.

Multimedia and function keys

(automatically identify the operating system) Tip : Press the key combination Fn+BackSpace, the backlight is off, and the number keys 1 to O are on to display the percentage of power, for example: 1 is on, indicating 10% power, 1 and 2 are on, indicating power and so on. (Below 30% red, below 50% yellow, above 50% green).

On-Screen Instructions

1. Turn on the computer to display LOGO, and then jump to the main screen
2. The content displayed on the main screen: date, time, power, system, connection mode, lock WIN, uppercase and lowercase, etc.
3. Menu interface: The left and right knobs are the functions of turning up and down the menu, and pressing the button down confirms the entry or selection.
4. GIF image: 1 GIF image by default. (This part can be replaced by driver customization GIF)

Tip : FN+knob, switch screen operation, and volume control.

Lighting Operation Instructions

Hot Swappable Operation Steps

• Hot swap; can replace different switches, and customize your favorite tactile and auditory feedback, the 3/5pin switch seat is compatible with most mechanical switches.

Packing list

• K86 keyboard x1
• DIY tool x1
• TYPE-C charging cable x1
• Manual x1

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>