dyson SV12 OnTrac Noise Cancelling Headphones User Manual

SV12 OnTrac Noise Cancelling Headphones

“`html

Specifications:

• Model: SV12 JN.00000

• Part Number: PN.000000-00-00

• Version: 01

• Battery Life: Up to 55 hours

• Charging Time: 10 minutes for 2.5 hours, 30 minutes for 9
  hours

• Charging Port: USB-C

Product Usage Instructions:

In the Box:

The package includes:

• Dyson OnTracTM noise-cancelling headphones
• OnTracTMSlimline case
• USB-C cable

Get to know your headphones:

Active Noise Cancellation: Double tap either ear cup to
switch between modes.

Autopause/Play: Headphones automatically pause when taken
off and play when put back on.

Adjustment: Put on headphones, adjust the headband for a
comfortable fit.

Turning on and Pairing:

Pairing: Use the MyDysonTM app for easy pairing. Download
the app, create an account, and follow instructions.

Power On: Press and hold the Power button; LED will turn
white when headphones are on.

Battery and LED Behavior:

Battery Life: Up to 55 hours listening time, quick charge
options available.

LED Indicator: Green for battery over 10%, amber flashing
for low battery, white for auto power off, pulse amber while
charging, green when fully charged.

Controlling Audio:

Intuitive Joystick: Control audio settings with an
intuitive joystick interface.

FAQ:

Q: Where can I buy additional accessories?

A: You can purchase additional accessories at www.dyson.com.

“`

SV12 JN.00000 PN.000000-00-00 00.00.00 VERSION NO.01

User manual

Contents In the box Download the MyDysonTMapp Get to know your headphones Turning on and pairing your headphones Battery and LED behaviour

Controlling audio Active noise cancellation In-flight adaptor Configuring your headphones Cleaning your Dyson OnTracTM headphones

In the box
Some accessories may not be included. You can buy additional accessories at www.dyson.com
Dyson OnTracTMnoise-cancelling headphones

OnTracTMSlimline case

Download the MyDysonTM app
An essential part of your experience, the MyDysonTMapp lets you control your Dyson OnTracTMnoise-cancelling headphones ­ wherever you are. If you haven’t already, download the app now for extra features and the latest updates.
Download the MyDysonTMapp from the App Store or Google Play. Open the app and follow the on-screen instructions to create a new account.

USB-C cable

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.

Get to know your headphones

Active noise cancellation To switch between modes, double tap either ear cup.
Autopause/Play Your headphones will automatically pause your audio when you take them off, and automatically play your audio when you put them back on.

Adjust your headphones Put your headphones on. Adjust the headband, sliding both sides until you have a comfortable fit.

Download the MyDysonTMapp See sound and air quality reports for your location, in real time. And adjust EQ modes to optimise your listening.
Power button Turn your headphones on and off, and connect to a Bluetooth® wireless technology device. Hold for two seconds to turn on or off, and five seconds to pair.

Battery-saving head detect After 30 minutes of inactivity your headphones will automatically turn off to save battery. To turn them back on, hold the power button down for 2 seconds.
Joystick Lets you control music, adjust volume and access your voice assistant ­ on the back of your right ear cup.

Ergonomic ear cup Angled at minus 13° and oval-shaped to sit over the ear
USB-C charger Charge your headphones using the USB-C Cable.

Turning on and pairing your headphones
Pairing your headphones is easiest with the MyDysonTM app. Connecting to the MyDysonTMapp Download the MyDysonTMapp from the App Store or Google Play. Open the app and follow the on-screen instructions to create a new account. If you already have an account, select Add machine’ and follow the instructions. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. Press and hold the Power button After two seconds, the LED light will turn white to show that your headphones are on. Connect using Bluetooth® wireless technology1 Press and hold the Power button for five seconds. The LED will flash blue when in pairing mode. Note: Before flashing blue, the LED will flash white and you will hear an off tone, continue holding the Power button through this. Open Bluetooth® in your mobile device’s settings menu. Check that Bluetooth® is turned on and selectAudio OnTrac’ to connect to your headphones. Your MyDysonTMapp will alert you when pairing is complete.
1. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.

Battery and LED behaviour
Battery life Up to 55 hours of listening, even with ANC switched on. And if you’re running low, a 10-minute charge delivers 2.5 hours of battery, and a 30-minute charge delivers 9 hours.
LED Locate the charge indicator at the front centre of the left ear cup.
Battery
Battery is more than 10% charged The LED will turn green.
Low battery If the battery is under 10% charged, the LED will flash amber for 5 seconds. Auto power off When the product turns off after 30 minutes of inactivity, you will see a white LED. Charging When connected to a power supply and charging, the LED will pulse amber. When fully charged the LED will turn green and then fade to off.
Bluetooth® wireless technology1
Bluetooth® in discoverable mode1 Blue LED ­ continuous pulse.
Bluetooth® successfully connected1 Blue LED ­ continuous pulse ends. Audio ­ welcome tone.
Alerts
Seek Dyson support Red LED ­ flash for 5 seconds
Update installing White LED ­ pulsed flashing
1. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.

Controlling audio
To play audio through your headphones, you’ll need to either connect them using Bluetooth® or the in-flight adaptor cable. Use the intuitive joystick Control your audio using the MyDysonTMapp or the joystick on the back of your right ear cup. Play and pause Press the middle of the joystick to play. Press it again to pause.
Intuitive joystick
Skip and seek Tap the joystick on the left or right to skip tracks. Press and hold to fast forward or rewind.
Volume Push the joystick up or down to adjust the volume.
Activating voice assistant Press and hold the middle of the joystick for two seconds to activate the voice control on your mobile device.
Answering phone calls To accept an incoming call, press the joystick. To decline a call, press and hold the joystick. To end a call, press the joystick.

Active noise cancellation
Use Active noise cancellation (ANC) to reduce the background noise around you. You can double tap either outer cap to switch between noise cancelling modes. Isolation mode The maximum level of ANC, reducing surrounding background noise. This is the default setting for your headphones.
Transparency mode To hear the environment around you.

In-flight adaptor
(available separately)
Connect the In-flight cable to the 2-pin adaptor, then plug into the plane’s entertainment system via the audio port. The In-flight adaptor will only charge your Dyson OnTracTM noise-cancelling headphones when the USB-C cable is also used. Please note that the audio controls on your Dyson OnTracTM noise- cancelling headphones will not function when the In-flight adaptor is in use.
Warning
The In-flight 2-pin adaptor is for connection to an audio outlet only. Plugging in to a mains socket outlet may result in a fire or pose a risk of an electric shock.

Configuring your headphones
Adjusting the headband To adjust the headband, grip and slide it into place for a comfortable fit.
Replacing the outer caps To remove an outer cap, twist the outermost circular part anti-clockwise. Align the replacement outer cap on the headphones and twist clockwise until it clicks.
Replacing the ear cushions To remove an ear cushion, twist it anti-clockwise. Select the correct replacement for the left or right ear. These are marked with an L and an R on both the headset and the ear cushions themselves. Line up the long and short slots on the ear cushions with the matching ridges on the headset. Push down and twist clockwise, until it clicks into place. Make sure the ear cushion is flush to the headphones to ensure proper functionality. When you replace the ear cushions, we recommend you go to the Product settings section of the MyDysonTMapp and recalibrate your headphones. You’ll find this under Replacing accessories.

Cleaning your Dyson OnTracTM headphones
Outer caps Wipe away dust or debris from the perforations in the ear cup covers with a soft, damp, lint-free cloth.
Ear cushions and headband Wipe away dust or debris with a soft, damp, lint- free cloth.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>