dyson 571H OnTrac Noise Cancelling Headphones User Manual

dyson 571H OnTrac Noise Cancelling Headphones

In the box

Some accessories may not be included. You can buy additional accessories at www.dyson.ie

Download the MyDyson™app

• An essential part of your experience, the MyDyson™app lets you control your Dyson OnTrac™noise-cancelling headphones – wherever you are. If you haven’t already, download the app now for extra features and the latest updates.
• Download the MyDyson™app from the App Store or Google Play. Open the app and follow the on-screen instructions to create a new account.
• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other  countries. App Store is a service mark of Apple Inc., registered in the U.S. and other  countries. Google Play and the Google Play  logo are trademarks of Google Inc.

Get to know your headphones

Turning on and pairing your headphones

Pairing your headphones is easiest with the MyDyson™app. Connecting to the MyDyson™app Download the MyDyson™app from the App Store or Google Play. Open the app and follow the on-screen instructions to create a new account.  If you already have an account, select  ‘Add machine’ and follow the instructions. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of  Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.

Press and hold the Power button
After two seconds, the LED light will turn white to show that your headphones are on.

Connect using Bluetooth® wireless technology
Press and hold the Power button for five seconds. The LED will flash blue when in pairing mode.

Note: Before flashing blue, the LED will flash white and you will hear an off-tone, continue holding the Power button through this.Open Bluetooth®in your mobile device’s settingsmenu. Check that Bluetooth®is turned onand select ‘Audio OnTrac’ to connect to your headphones. Your MyDyson™app will alert you when pairing is complete.

1. The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.

Battery and LED behavior

Battery life
Up to 55 hours of listening, even with ANC switched on. And if you’re running low, a 10-minute charge delivers 2.5 hours of battery, and a 30-minute charge delivers 9 hours.

LED
Locate the charge indicator at the front center of the left ear cup.

Controlling audio

To play audio through your headphones, you’ll need to either connect them using Bluetooth® or the in-flight adaptor cable.

Use the intuitive joystick
Control your audio using the MyDyson™app or the joystick on the back of your right ear cup.

Play and pause
Press the middle of the joystick to play. Press it again to pause.

Intuitive joystick

Active noise cancellation

Use Active noise cancellation (ANC) to reduce the background noise around you. You can double-tap either outer cap to switch between noise-cancelling modes.

Isolation mode
The maximum level of ANC, reduces surrounding background noise. This is the default setting for your headphones.

Transparency mode
To hear the environment around you.

In-flight adaptor

(available separately)

Warning
The In-flight 2-pin adaptor is for connection to an audio outlet only. Plugging into a mains socket outlet may result in a fire or pose a risk of an electric shock.  Connect the In-flight cable to the 2-pin adaptor, then plug it into the plane’s entertainment system via the audio port. The In-flight adaptor will only charge your Dyson OnTrac™ noise-canceling headphones when the USB-C cable is also used. Please note that the audio controls on your Dyson OnTrac™ noise-canceling headphones will not function when the In-flight adaptor is in use.

Warning
The In-flight 2-pin adaptor is for connection to an audio outlet only. Plugging into a mains socket outlet may result in a fire or pose a risk of an electric shock.

Configuring your headphones

Adjusting the headband
To adjust the headband, grip and slide it into place for a comfortable fit.

Replacing the outer caps
To remove an outer cap, twist the outermost circular part anti-clockwise. Align the replacement outer cap on the headphones and twist clockwise until it clicks.

Replacing the ear cushions

• To remove an ear cushion, twist it anti-clockwise. Select the correct replacement for the left or right ear. These are marked with an L and an R on both the headset and the ear cushions themselves.
• Line up the long and short slots on the ear  cushions with the matching ridges on the headset. Push down and twist clockwise, until it clicks into place. Make sure the ear cushion is flush to the headphones to ensure proper functionality.
• When you replace the ear cushions, we recommend you go to the Product settings section of the MyDyson™app and recalibrate your headphones. You’ll find this under Replacing accessories.

Cleaning your Dyson OnTrac™ headphones

Outer caps
Wipe away dust or debris from the perforations in the ear cup covers with a soft, damp, lint-free cloth.

Ear cushions and headband
Wipe away dust or debris with a soft, damp, lint-free cloth.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>