Blueair 3132111100 Max Blue Pure Air Purifier User Manual
- September 7, 2024
- Blueair
Table of Contents
3132111100 Max Blue Pure Air Purifier
User manual
Blue Pure
11i Max
Safety information
Product name Blue Pure 11i Max
Model number 3132111100
Blue Pure 511i Max air puri is electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of electric shock or injury.
· This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
· Supervise children to ensure that they do not play with the appliance. ·
Cleaning and user maintenance shall not be made by children without
supervision. · Always disconnect the appliance from the power supply before
maintenance. · If your Blueair appliance is found to be defective, we will
replace it with the same or a
similar model at no cost, per the warranty terms. Please use caution
attempting repairs yourself, as this presents the danger of electrical shock
or injury. · Ensure that the power cable and the power plug are not at risk of
getting damaged. · If the appliance is damaged or malfunctions, turn it off,
disconnect it from the power supply and contact Blueair. · The power plug must
be firmly inserted in the power socket.
· When disconnecting the unit from the power supply, do not pull on the power
cord, pull on the power plug.
· Use the power cable provided with your Blueair air purifier to plug directly
and firmly into an appropriate, electrical outlet.
· Do not use an extension cord or a power strip. Refer to the rating label on
your appliance. Do not alter the power plug in any way.
· Do not use the included power cord for anything else but the appliance. · Do
not allow objects to enter or block the air inlets and air outlets as this can
cause
electric shock or damage the appliance. · Do not place any objects on top of
or directly against the appliance. · Do not sit on, stand, climb onto or hang
from the appliance. · Keep the appliance, including the power cable, at a safe
distance from heated
surfaces and open fire. · Keep the appliance and power plug away from water
and other liquids. · Keep the appliance and power plug away from chemicals
such as pesticides and
deodorants. · Place the air purifier on the floor or a stable surface to
prevent tipping. · Do not use the appliance outdoors or in wet environments
such as bathrooms,
laundry rooms or pool areas. Always turn off and disconnect the appliance from
the power supply before moving the unit, changing filters, cleaning or
carrying out maintenance procedures. · Never clean with gasoline, chemical
solvents, or corrosive materials as these agents may damage the air purifier.
Regulatory information
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. Th equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation
between the equipment and receiver. · Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
· This device may not cause harmful interference. · This device must accept
any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
FCC/ISED RF Exposure Information: This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator and
your body.
Product map
A User interface B Air outlet C Air quality indicator (AQI)
D Fan motor
E Noise shield
F Particle & car
ter
G Washable fabric pre- ter
A
B
C
Air quality status (PM 2.5)
D
The air
has a particle sensor to
measure the particles (PM2.5) level.
The LED indicator displays air quality
status in 5 colors from excellent (blue) to
E
very polluted (red).
F G
Getting started
1 ON/Standby button 2 Fan Speed button
Indicators 3 Auto mode 4 Night mode (lowest
speed setting) 5 Speed 1
6 Speed 2 7 Speed 3
8 Filter replacement 9 Wi-Fi
5
4
6
3
7
1 2 9
A
3
2
8 1
Two button control
Press the ON/Standby button to turn the air puri r.
Adjust the mode and the fan speed using the Fan Speed button.
This
has a total of four fan speeds – Night mode being the lowest/most silent
one, Speed three being the highest one.
Auto mode
Automatically adjusts the fan speed based on your PM2.5 indoor level to ensure
optimal air quality. Recommended setting.
Night mode
Fan speeds 12-3
1 , 2 , 3 Lowest fan speed and
Fan speed levels which
fully dimmed lights.
you can manually set by
pressing the Fan Speed
button on the interface
or adjust via Blueair app.
How to use tips
Change brightness
Step 1
Press the Fan Speed button and On/ Standby button at the same time. Hold for three seconds.
Then, keep holding your nger on the On/Standby button and tap the Fan Speed button with the other nger to adjust brightness.
Step 2
If the brightness is on the lowest level, then it will increase by one level. If the brightness is on the highest level, then it will decrease by one level.
signal the device is ready for pairing. After successfully connecting the
device to the app, the Wi-Fi LED will stay solid.
If you choose not to connect the product to Wi-Fi, the blinking LED can
button for about 5 seconds and then release. The Wi-Fi LED will stop blinking.
5 seconds
isable Child lock
Long press On/Standby button for about 5 seconds (until all the LEDs of the
interface light up and blink once). Then release.
When the Child lock is on the air purifier will continue to operate but the
speed/mode button will be locked.
Filter reset
Extra long press Fan Speed button for about 15 seconds (until
5 seconds
. Then release.
After replacing the
it is required
to manually conduct
reset on
the appliance. If done correctly, the
red
replacement indicator will
blink three times and then disappear.
15 seconds
Factory reset
Extra long press On/Standby button for about 15 seconds (until all the LEDs of
the interface light up for the second time and blink four times). Then
release.
After factory reset, the air puri restarts with default configuration will go
into Standby mode.
15 seconds
Connect to the Blueair app
Connecting to the Blueair app allows you to control the air
additional functions to the air
r.
remotely and monitor ter usage. The app o ers
Step 1 Download the Blueair app from the App Store or Google Play.
Step 2 Open the app. Create or sign into your Blueair account.
Step 3
Click on Connect Product and select Blue. Follow the instructions to complete
app pairing.
First time connection tips
Make sure to turn on
yo
r. Once
the Wi-Fi indicator is
blinking, it is ready to
be paired with your
app.
Bluetooth is required for rst time pairing. Turn your phone’s bluetooth on and keep your phone within 3ft of the air puri for initial pairing.
Make sure you are using a visible Wi-Fi network that is not hidden. VPN (Virtual Private Network) should be deactivated while using the Blueair App.
This
can
only connect to 2.4
GHz Wi-Fi.
If you are using a
dual-band Wi-Fi
router, make sure to
select 2.4GHz.
2.4 GHZ
Keep your air puri r within 15 feet of your Wi-Fi router to maintain optimal connection.
15 feet
Maintenance information
Important! Turn the air
o and disconnect the air puri
Changing your lter
from the power supply before maintenance.
1 2
A
3
When your air
r’s indicator light turns red, it’s time to change the main ter. This will
occur some time between 6 and 9 months of operation, depending on usage and your air
quality conditions.
Step 1
Turn o the air puri and unplug it. Rotate the top counter-clockwise to unlock,
then lift up to remove it.
Step 4
Place the noise shield back on top of the
lter. Pull up the fabric pre- lter over the lter and the noise shield. (Please
ensure that the leather tag is on the upper side of the fabric pre- lter.)
Step 2 Remove the fabric pre- ter and the noise shield
Step 5 Twist the top back on and plug in the air puri r.
Step 3
Use the lter handles to pull out the old
lter and replace with new. Make sure to remove plastic wrapping before
inserting the new lter in the appliance.
Step 6
Important! Turn the air puri er back on and reset the lter indicator by
pressing down the Fan Speed button for 15 seconds (
). Then release.
Cleaning your washable pre- lter
Clean your pre- ter regularly when you see dust or dirt. Vacuum the exterior
of the fabric with a soft brush attachment. If the pre- ter requires a deeper
clean, wash according to the instructions on the pr ter´s label. Hang to dry.
Step 1 Turn the air puri r
Rotate the top counter-clockwise to
Step 2
Remove the fabric pre- ter from the noise shield and main ter.
Step 3
Wash according to instructions on the fabric pre- ter´s label.
Step 4
Pull the clean pre- ter back over the noise shield and main ter.
Step 5
Please ensure that the leather tab of the pre- ter is on the upper part.
Step 6
Push the top cylinder down, rotate it clockwise to lock it.
Disposal and recycling
This air puri should be recycled as electronic waste. If you have any
questions regarding the disposal of this air puri r, please contact your local
waste management for best way to recycle.
Troubleshooting
Issue
Potential Cause
Try this
There is a red circle on my air puri r’s panel.
It is time to change the main ter.
1. Change lter according to the instructions in this guide. 2. Reset the lter life timer: press down the fan speed button until the red light disappears (15 seconds).
My air puri is making too much noise.
Air puri rs that are set on a high-speed level produce more noise because they
function at faster rates.
The plastic sealing is still on the ter.
Set a lower fan speed. The air puri should be quieter.
1. Remove the main ter according to the instructions in this guide. 2. Make
sure that the plastic cover is removed from the ter.
If the main ter or pre- ter are clogged or dirty, the engine might not get su nt air ow, which may result in increased noise levels.
Unplug your air puri er and vacuum the air puri er and its fabric pre- lter from the outside with a soft brush attachment. Clean the fabric pre- lter in the washing machine. Replace the main lter when y ter indicator turns red.
I cannot connect my air puri r.
The air puri is too far from your phone and router during the set up.
1. Ensure that your phone, air puri er and Wi-Fi router are in the same room and in close distance during initial set up (follow the app for exact distance instructions). Once you have successfully paired your air puri er you can place it at your desired location. 2.Make sure that your air puri er is plugged in and powered on.
The Blueair App is not up to date.
Open your App Store in your phone and ensure you have the latest Blueair app version.
The router is not on or has no connection. The router is not using a standard
connection.
Bluetooth is deactivated.
Ensure the following before trying to connect your product again: 1. Internet
is currently running 2. You are using a 2.4GHz network. 3. Deactivate VPN.
Ensure Bluetooth is enabled in your smartphone’s settings.
My air puri has lost connection.
Temporary Wi-Fi disturbances. New Wi-Fi settings or router.
My indoor air quality is not improving. Indoor air quality is polluted. Air quality sensors are dusty and showing incorrect levels.
If your air puri does not re-connect by itself after a few
minutes:
1. Open the Blueair app.
2. Select y
go to Product Settings.
3. Delete the air puri r.
4. Go back to the home screen and select “Connect Product”.
Follow the connection instructions on the product.
1.Disconnect the power cable from the wall outlet and wait approximately 30
seconds 2. Make sure that there are no objects or dust around the air quality
sensors at the back of the air purifier. 3. Reconnect the power cable. 4.
Press the power button If the air quality does not improve with the use of the
air
th ventilation, please contact us.
For more information and troubleshooting tips, please check the Support page on www.blueair.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>