akasa A-NUC101-M1B Thermal Solution User Manual
- September 7, 2024
- akasa
Table of Contents
akasa A-NUC101-M1B Thermal Solution
Specifications
- Product Code: A-NUC101-M1B
- Front Panel Layout: USB 3.2 Gen 2 ports x4, Type-C port x2, Power LED x2, Power switch x4
- Rear Panel Layout: Kensington lock hole, Rear I/O opening, Antenna fitting holes
- Internal Layout: Copper heatsink for heat transfer, M/B mounting standoffs, Front panel chassis PCB
Product Usage Instructions
Precautions
- Electrostatic discharge (ESD) can damage system components. If an ESD-controlled workstation is not available, wear an antistatic wrist strap or touch an earthed surface before handling any PC components.
- Please be careful when unpacking and setting up this product as metal edges can cause injury if not handled with care. Keep away from children.
Front Panel Setup
- Connect the USB 3.2 Gen 2 ports and Type-C port as needed.
- Attach the Power LED and Power switches according to the layout.
Rear Panel Setup
- Securely fit any required antennas into the antenna fitting holes.
- Utilize the Kensington lock hole for added security.
Internal Components Installation
- Mount the Copper heatsink for heat transfer and M/B mounting standoffs as instructed.
- Install the Front panel chassis PCB in the designated location.
FAQ
- Q: How do I connect the Power LED connectors?
- A: The Power LED connectors should be attached as per the Front Panel Layout provided in the user manual.
- Q: What is the purpose of the Case Feet Installation?
- A: The Case Feet Installation is to provide stability and airflow for the product. Follow the instructions for either black or silver installation based on your preference.
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD- controlled workstation is not available, wear an antistatic wrist strap or touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges can cause injury if not handled with care. Keep away from children.
Contents
- 1 2 Thermal gap filler
- ③ Thermal compound
- ④ Screws for motherboard (M3)
- ⑤ Washer
- ⑥ Thermal gap filler (for M.2 SSD)
- ⑦ EMI gasket
- ⑧2.5” HDD/SSD screws (M3)
- ⑨ 2.5” HDD/SSD mounting bracket
- ⑩ HDD protective film
- ⑪ SATA adapter cable
- ⑫⑬ Screws
- ⑭ End cover
- ⑮ Standoffs
- ⑯ Case feet kit
- ⑰ Fan simulator module
- ⑱ Cable tie
Layout
Front Panel Layout
Rear Panel Layout
Internal Layout
- A Copper heatsink for heat transfer
- B M/B mounting standoFFs
- C Front panel chassis PCB
Front Panel Chassis PCB Setting
Installation
Fan Simulator Module Installation
Case Feet Installation
Documents / Resources
|
akasa A-NUC101-M1B Thermal
Solution
[pdf] User Manual
A-NUC101-M1B, NUC 12-13 Pro, NUC 14 Pro, A-NUC101-M1B Thermal Solution,
A-NUC101-M1B, Thermal Solution, Solution
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>