UGREEN PB572 Magnetic Wireless Power Bank User Manual
- September 7, 2024
- UGREEN
Table of Contents
UGREEN PB572 Magnetic Wireless Power Bank
Package Contents
- 1 XPower Bank
- 1 Charging Cable
- 1X User Manual
Cautions
- This product is compatible with official MagSafe cases from Apple or magnetic cases from UGREEN. Using other cases may affect magnetic charging.
- Do not place metal objects (such as paper clips, or coins) or magnetic cards in the charging area to avoid abnormal charging.
Product Overview
- Wireless Charging Area
- Foldable Kickstand
- Button
- Display Screen
- USB-C Port
Button Operation
- Power On (Manual) Single-click
- Power Off (Manual) Press and hold for 6s
- Display Off Double-click
- Display On Single-click
Recharging Your Power Bank
Tips:
- Before initial use, please fully charge the product.
- It is recommended to use a charger of PD 20W or higher for the fastest charging experience.
Charging Your Devices
Wireless Charging
- For MagSafe-compatible iPhones (iPhone 12 models or later)e snap and charge
- For other phones that support wireless charging: Adjust the position of the phone to align it with the wireless charging area of the product.
- Place the phone on the wireless charging area, the («4)) icon will appear, and the product will automatically start charging. If it does not charge, please single-click the button.
- After charging is completed and the device is removed, the product will automatically power off.
- Triple-click the button and wait for about 2 seconds to disable the wireless charging function (only used as a magnetic phone stand).
Wired Charging
- After connecting the device, the product will automatically start charging. If it does not charge, please single-click the1 button.
- After charging is completed and the device is removed, theV product will automatically power off within 3 minutes.
Tip : Do not use a multi-in-one charging cable to charge multiple devices simultaneously to avoid damaging your devices.
Specifications
The data are measured by UGREEN lab but may vary based on specific circumstances.
This product features multiple protections. When internal temperature and other parameters reach the threshold, the product will automatically reduce output power.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interterence received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radioV frequency energy and, if not installed and used by the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Manufacturer: Ugreen Group Limited
Manufacturer Add : Ugreen Building, Longcheng Industrial Park, Longguanxi
Road, Longhua, Shenzhen, China
Tel : +86-755-28066530
Email: support@ugreen.com
US REP: America Ugreen Limited
Add: 108 West, 13Th Street, Wilmington, Delaware 19801, United States
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference; 2) this device must accept any interference, including
interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
WEEE
- This symbol on the products) and/or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), products) used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product) to designated collection points where it will be accepted free of charge.
- Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
- Please contact your local authority for further details of your nearest designated collection point.
- Penalties may be applicable for incorrect disposal of this waste, by your national legislation.
- For professional users in the European Union If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.
Declaration of Conformity
Hereby, Ugreen Group Limited declares that the product is in compliance with
Directive UK Radio Equipment Regulations(SI 2017 No.1206)& The Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 (SI 2012 No.3032). Learn more about the GB
Declaration of Conformity from the following Internet address:
https://www.ugreen.com/download/
Manufacturer: Ugreen Group Limited
Manufacturer Add : Ugreen Building, Longcheng Industrial Park, Longguanxi
Road, Longhua, Shenzhen, China
Tel: +86-755-28066530
Email: support@ugreen.com
UK REP : Acumen International Business Consultancy Limited
UK Add : 94 Ock Street, Abingdon, OX14 5DH, UK
Tel: +44(0) 1235200526
Email: support@ugreen.com
Warranty Information
A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems.