GREE R32 Kingfisher Hi Wall Instruction Manual
- September 13, 2024
- Gree
Table of Contents
GREE R32 Kingfisher Hi-Wall
Product Specifications
- Cleaning Frequency: Every three months
- Signal Receiving Range: 8m
Cleaning and Maintenance
The filter should be cleaned every three months to ensure optimal performance. Follow these steps:
- Disconnect power supply before cleaning.
- Remove the filter by holding the handle and pulling it upwards.
- Clean the filter with clear water or a dust catcher. For heavily soiled filters, use a mild detergent.
- Avoid using volatile liquids, fire, or a hair dryer to clean or dry the filter.
Precautions
Before cleaning the air conditioner, make sure to follow these precautions:
- Avoid touching the fins to prevent injury.
- Avoid washing the air conditioner with water to prevent electric shock.
- Avoid using volatile liquids or corrosive detergents.
Troubleshooting
If you encounter any issues with the air conditioner, follow these general troubleshooting steps:
- Check for interference and stable voltage.
- Ensure the remote controller is within the signal-receiving range.
- Remove any obstacles from the indoor unit.
- Check the batteries and sensitivity of the remote controller.
Frequently Asked Questions
Q: How often should I clean the filter?
A: The filter should be cleaned every three months for optimal
performance.
Q: What should I do if the remote controller display is fuzzy or not
working?
A: Check the batteries and replace them if needed. Ensure the remote
controller is within the signal-receiving range.
Q: Can I use a hair dryer to dry the filter after cleaning?
A: No, avoid using a hair dryer to prevent deformation or fire hazards.
Let the filter air dry naturally.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>