Amazon T16 Intelligent Detector User Manual
- September 5, 2024
- Amazon
Table of Contents
Amazon T16 Intelligent Detector
Product Specifications
- Model: T16
- Frequency Range : 1MHz-6.58GHz
- GPS: Included
- Power Input : MicroUSB DC5V/1A
- Battery: 3.7V/200mAh
- Operating Temperature: -10°C to 10°C
- Compatibility: PC
Product Functions
- with automatic detection function, the host is portable, when in the environment with an eavesdropping device, pinhole camera
- with a signal strength indicating light, can quickly find the source of the signal.
- the adjustment function button can adjust the sensitivity. Increase sensitivity to increase detection range or decrease sensitivity to shorten Applicable people
- People who often go to public entertainment places for consumption;
- People who often go to various shopping malls to try on clothes;
- respect their stability and the stability of others;
- Persons who have access to and custody of trade secrets;
- Security personnel in places with trade secrets and technical secrets;
- anti-candid, anti-eavesdropping professionals;
Scope of application
- Detect whether your car or office is installed, wireless eavesdropper or wireless eavesdropper.
- Detect whether the phone is eavesdropping or abnormal (it sends out signals for no reason when it is in standby mode).
- Detect whether your car is fitted with GPS tracking or a GPS location tracker.
- Detect mobile phone messages receiving and receiving the signal, mobile phone Internet access signal, mobile phone switch, and call signal.
- Detect the field strength of wireless network signal, mobile phone base station signal and wireless monitoring system.
- Check the hotel, washroom, guesthouse, entertainment place, and changing room to prevent wireless cameras.
- Business negotiations, school invigilation sites, factories, military installations, or government offices.
Product instruction
- Full-band signal detection, frequency detection range [1 MHz-6.58HZ] Press and hold the [ ] for 3 to 5 seconds, release your finger when you hear a beeping sound, the indicator light is on, and the default full-band detection mode is turned on.
- Move the instrument up, down, left and right, there will be a voice prompt, indicating that there is an emission source. The more white light signal indicators, the stronger the signal.
- Short press the [ M) ], the more white lights, the higher the sensitivity, which can expand the search range.
- Cyclic adjustment [ M) ] can reduce the number of white lights, reduce the sensitivity, reduce the detection range, and finally find the emission source.
Detection Camera
-
Press and hold the [ ] for 3 to 5 seconds, release your finger when you hear a beeping sound, and the indicator light will be on. Short press the [M) ] The 6 infrared night vision lights on the rear of the machine will light up, and short press the [M)] to
Control the flashing speed of the red light. Each time the sensitivity button is pressed, the flashing frequency will be one evel faster. There are 6 levels to choose from, which can adapt to all kinds of people. -
Move the instrument up, down, left and right to scan the surrounding environment with laser light. Observe through the red filter of this instrument. If there is a camera lens in front, you will find that there are strong bright spots flickering.
-
Press the [ ] once to turn off the laser scanning function.
Enter full-band sianal detection.
Charging
Insert the data cable in the box into the instrument and connect it to the charger, the red light is on when charging, and the green light is on when fully charged
Basic parameters
Common Questions
-
Why is the silent sleep locator not detected?
A: Usually sleep locators work once a day, for 5 to 7 minutes at a time, so when the detector is normally detecting wireless signals, the locator may not send out a signal. -
Why is the location of the real-time locator not accurately detected?
A: Real-time locator generally sends a signal about 10 seconds, detection test please do not move back and forth, it is best to fix in a position for more than 5 minutes, and then change a position to continue detection. -
Why is the detector terminal beeping?
A; Please clear the surrounding environment because there are too many interference signals. Turn the sensitivity down the second time. -
Why does the detector squeak so loudly near the Windows of the house?
A; The Windows are made of aluminum alloy, forming a loop antenna that receives signals particularly well. -
Why was there no camera detected?
A; It is possible that the camera is not working or the camera is wired. At this time, use red filter infrared light detection
FCC
FCC Warnning
This equipment has been tested and found to comply with the limits for a
Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions,
maycause harmful interference to radio communications. However, there is no
guarantee thatinterference will not occur in a particular installation. If
this equipment does cause harmfulinterference to radio or television
reception, which can be determined by turning the equipmentoff and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Frequently Asked Questions
- Q: How do I charge the device?
- A: Use the provided MicroUSB cable to connect the device to a power source with DC5V/1A output for charging.
- Q: Can the device be used with a Mac computer?
- A: The device is compatible with PCs only and may not work with Mac computers.
- Q: What is the purpose of the included GPS feature?
- A: The GPS functionality helps in location tracking and synchronization for certain applications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>