VEVOR RECHDB1, RECHDB2 Dust Barrier System Owner’s Manual

: September 4, 2024
: VEVOR

Table of Contents

RECHDB1, RECHDB2 Dust Barrier System
Safety Notice
Assembly Instruction
Documents / Resources

Model:RECHDB1/RECHDB2
Dust Barrier System

(The picture is for reference only, please refer to the actual object)

RECHDB1, RECHDB2 Dust Barrier System

NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product.

Safety Notice

WARNING:

Read this material before using this product.
Flammable: Keep away from open flame. This product will ignite and burn if brought into contact with an open flame.
Keep away from sharp points,blades and other items,so as not to scratch the product.
This product is not a toy, Dust barrier system cannot be used as toys for children to play with.
Test the tape on a discrete surface before using. Use on clean, dry surface. Don’t intended to use with lacqurers, wall paper, unpainted wallboard, surface with dust.

Assembly precautions

Assemble only according to these instructions.
Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
Keep assembly area clean and well lit.
Keep bystanders out of the area during assembly.

SAVE THESE INSTRUCTIONS
The package doesn’t include the magnetic zipper.The installation of magnetic zipper in the manual is for display only. Please purchase by yourself if you need.

Assembly Instruction

Unlock the extension poles and measure the maxi- mum extension length. Make the extension poles about 3-5cm longer than the ceiling height and lock the poles.
Making the extension poles a little bit higher than the ceiling will secure the poles tightly standing upright between the floor and ceiling.
Use a double sided tape to stick the film before installing the extension pole.
Lift the film with extension poles and install the extension pole on the appropriate position you need, fasten and lock it. Lock by twist ingthe thinner pole according to below instruction.
Find the right place you want to make a door and stick the adhesive zipper on the appropriate place of the film sheeting.

① Find the right place you want to stick the zipper.
② Peel off the release paper and stick the zipper on the film.
③ Press the film with the zipper to make sure they stick together firmly.
④ Cut off the film in the middle of the zipper.

| Items| Description
---|---|---
1| Name| Dust Barrier System
2| Model| RECHDB1
3| Parameter| Dust Barrier size: 10m x 4m Rod: 4PCS
The length of the rod: 10ft
| Items| Description
---|---|---
1| Name| Dust Barrier System
2| Model| RECHDB2
3| Parameter| Dust Barrier size: 10m x 4m Rod: 4PCS
The length of the rod: 12ft

Packing List

Manual x 1
Carrier Bag x 1
Extension poles(with caps on two ends) x 4
Cutter x 1
Double sided tape 2mx2cm 10pcs
Film sheet

Dust Barrier System
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

Technical Support and E-Warranty Certificate
www.vevor.com/support
MADE IN CHINA

Documents / Resources

| VEVOR RECHDB1, RECHDB2 Dust Barrier System [pdf] Owner's Manual
RECHDB1 RECHDB2 Dust Barrier System, RECHDB1, RECHDB2, Dust Barrier System, Barrier System, System
---|---