super bright LED WSR LED Wall Sconce Light User Manual

June 3, 2024
super bright LED

super bright LED WSR LED Wall Sconce Light

super bright LED WSR LED Wall Sconce Light feature

Safety and Notes

  • Product should be installed and serviced in accordance with applicable national, state, and local building and electrical codes.

  • To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.

  • Avoid looking directly into lamp when illuminated.

  • Ensure all mounts are securely attached and will support the weight of the fixture. Failure to properly support fixture may result in damage or injury, for which the manufacturer does not assume responsibility.

  • There are no serviceable parts inside this fixture. Do not attempt to dismantle
    or service this fixture in any way. If LEDs or protective lens cover are damaged, the fixture must be replaced.

  • Not intended for recess mounting in any type of installation.

  • Use minimum 18 AWG coated wire for supply leads and connect to 120 VAC only.

Wiring Diagram

super bright LED WSR LED Wall Sconce Light 1Specifications

  • Model: WSR/WSS Series
  • Operating Temperature: -22°–104° F (-30°–40° C)
  • Environmental Rating: Suitable for wet locations

Check product label for specific electrical specifications related to installation. Improper installation will void warranty.

Installation (WSR pictured, WSS similar)

  1. Turn off breaker to remove supply power from circuit.

  2. Attach the provided mounting plate to junction box.
    Note: Ensure the grounding screw is facing outward and the two fixture mounting screw holes align with the desired fixture orientation.

  3. Connect wiring.

  4. Place the fixture over the mounting plate, aligning the two mounting screw holes on the plate with the two screw holes on the fixture, and secure using the provided hardware.
    Note: To ensure a weatherproof seal, use silicone sealant around the base of the light where it meets the mounting surface.

  5. Restore supply power.

super bright LED WSR LED Wall Sconce Light 2

Rev Date: V1.0 08/05/2021
4400 Earth City Expy, St. Louis, MO 63045 superbrightleds.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals