super bright LED UHBD-S1 Series LED UFO High Bay Light User Manual
- June 3, 2024
- super bright LED
Table of Contents
super bright LED UHBD-S1 Series LED UFO High Bay Light User Manual
Safety and Notes
- Product should be installed by a certified electrician in accordance with applicable national, state, and local building and electrical codes.
- To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
- Avoid looking directly into the lamp when illuminated.
- Ensure all mounts are securely attached and will support the weight of the fixture. Failure to properly support the fixture may result in damage or injury, for which the manufacturer does not assume responsibility.
Wiring Diagram
-
100–277 VAC Input
-
0–10 V Dimming
Specifications
Model
| UHBD-S1-xKx-80H
---|---
Operating Temperature|
-40°–113° F(-40°–45° C)
Environmental Rating
| IP65, wet locations
Dimming|
0–10 V
Check product label for specific electrical specifications related to
installation.
Improper installation will void warranty.
Included Parts
- 1 – high bay light
- 1 – hook
Installation
- Insert hook into threaded hole on top of fixture and tighten.
- With supply power switched off, connect wiring.
- Hang fixture by attaching hook to an existing chain or carabiner (SBL number HBU-CARB or SC-300).
Important: Read all instructions prior to installation.
Reflectors and Guards
Optional reflectors and guards can be installed by attaching the accessory to the existing, unused screw holes in the light housing using the screws provided with the accessory guard or reflector.
Support
4400 Earth City Expy, St. Louis, MO
63045866-590-3533
superbrightleds.com
References
Read User Manual Online (PDF format)
Loading......