DCWeditions H184.221 Half Moon LED Lamp Instruction Manual

DCWeditions H184.221 Half Moon LED Lamp

IN THE BOX

REQUIRED TOOLS

CLEANING INSTRUCTIONS

Clean with a damp cloth or microfiber (with degreaser – optional).

REPARABILITY
This product contains a LED light source of energy efficiency class B. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

• Replaceable (LED only) light source by a professional.
• Replaceable control gear by end-user.

WARNING
READ BEFORE ASSEMBLY: the marble base is in the other package, please handle with care.

MEZZALUNA floor lamp components

1. The marble base, has various finishes.
2. The lamp body, a chrome finish.
3. The lamp head, has various finishes.
4. Filters to adjust the light temperature.
5. Base assembly kit.
6. Power transformer plug.

INSTALLATION

STEP 1: Using the provided Allen key, assemble the base (4) onto the lamp body (6). Make sure to assemble the elements in the order shown in the drawing. To facilitate assembly, it is recommended to elevate the lamp body (6), using a lamp carton, for example. Ensure that the chrome disc (5) is oriented with the engraving facing upward.

STEP 2: Remove the 2 screws from the tube fitting (1).

STEP 3:

• Connect the lamp head connector (1) with that of the lamp body (2). Guide it into the opening of the lamp head.
• Once the tube fitting is guided to a stop in the lamp head, align the fixing holes and screw in the 2 screws using a screwdriver.

STEP 4: Connect the power supply.

STEP 5 (OPTIONAL)
Possible Adjustment #1 = the light flux output

• The light source is equipped with a diffusing film, to reduce the visibility of the LED spots.
• The trade-off is that it reduces the luminous flux of the source by approximately 10%.
• If you wish to benefit from the full luminous flux of your floor lamp, this film is removable, as shown in the illustration below.

1. Grasp the corner of the film and pull.
2. This action reveals the transparent protective plate, allowing 100% of the flux to pass through

STEP 6 (OPTIONAL)
Possible Adjustment #2 = the light color temperature

The MEZZALUNA floor lamp comes as standard with a light source emitting 2700 Kelvins (Warm White) We leave the option to adjust the source to neutral tones (3000K) or very warm tones (2400K). To do this, follow the steps below.

1. Grasp the diffusing film, remove it to access the 2700 Kelvins warming filter.
2. Grasp the 2700 Kelvins filter, and remove it.
3. For a very warm light: replace it with the 2400 Kelvins filter.
   • Simply slide the notches of the filter between the acrylic plate and the metal filter holder.
   • For neutral white light: do not add anything.
4. For both scenarios: replace the diffusing film to reduce the LED points.

REPARABILITY

DRIVER CHANGE
Unplug the floor lamp, then disconnect the power supply to discard.

LED SOURCE CHANGE
Unscrew the 4 screws of the filter holder, lift the elements to access the LED panel.

• Remove the 4 screws to release the LED source.
• A set of quick connectors allows you to completely disconnect the LED panel (1).
• Replace it with the new LED source and repeat the steps in reverse order.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>