Lowes KF170348-01 White Wood Makeup Vanity Desk Installation Guide
- September 5, 2024
- lowes
Table of Contents
KF170348-01 White Wood Makeup Vanity Desk
“`html
Product Information
Specifications:
- Product: Dresser
- Version: 11/20/2023
Product Usage Instructions:
1. Important Information
Please read the entire manual before starting to assemble and/or
using this product. Follow the manual thoroughly and keep it for
further reference.
2. Avoid Scratches
In order to avoid scratching the furniture, assemble it on a
soft layer, such as a rug.
3. Improve Efficiency
Try to find a partner to install with you, which can speed up
the installation efficiency and shorten the time.
4. Anti-Topple Warning
Overturned furniture can cause serious or fatal crush injuries.
To prevent tipping over, be sure to use the wall attachment. If not
included, please purchase the wall attachment that fits your wall.
If unsure, seek professional advice.
5. Installation Tools
When installing, carefully confirm whether each screw
corresponds to the manual. Accessories with similar shapes can be
distinguished by size.
6. Safety Instructions
– Always install the Anti-tip device provided.
– Never put a TV on this product.
– Never allow children to stand, climb, or hang on drawers,
doors, or shelves.
– Never open more than one drawer at a time.
– Place heaviest items in the lowest drawers.
Frequently Asked Questions (FAQ)
Q: Can I put a TV on this dresser?
A: No, it is advised to never put a TV on this product.
Q: How should I prevent tipping over of the dresser?
A: Make sure to use the wall attachment provided or purchase one
that fits your wall. Seek professional advice if unsure.
“`
Dresser
Version:11/20/2023
1/35
IMPORTANT INFORMATION! please read the entire manual before starting to
assemble and/or using this product.follow the manual thoroughly and keep it
for further reference.
AVOID SCRATCHES! In order to avoid scratching this furnuture should be
assembled on a soft layer-could be a rug.
IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can
speed up the installation efficiency and shorten the time.
ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
IMPORTANT !
It is important that any product which is assembled using any kind of screw is
re-tightened 2 weeks after assembly,and once every 3 months – in order to
assure stability through-out the lifespan of the product. For regular
maintenance and cleaning of the product, for the frame, please use a rag
dipped in neutral detergent to fully wipe it, and then dry it with a clean
rag.For glass materials, wipe with a rag dampened with water glass cleaner,
and then dry with a dry rag. Do not use an electric screwdriver, and do not
use too much force when installing, because the board is easy to break.
2/35
Please prepare the following tools
A x 53
B x 53
When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size
C x 24
D x 20
E x 36
6 x 35 mm F x 2
15 x 10 mm G x 18
6 x 30 mm H x 1
4 x 35 mm J x 1
3 x 12 mm K x 2
L x 2
3.5 x 14 mm M x 10
N x 8
P x 8
6 x 30 mm Q x 3
R x 1
4 x 14 mm S x 6
CL x 3
3 x 16 mm CR x 3
DL x 3
DR x 3
L300 mm
L300 mm
L300 mm
L300 mm
3/35
2
1
9 10
9
12
3
11
13
6
5
7 8
4
16 11571717
18
14
18
15
16
25 23
27
24
26
28
21
21 19 21
20
22
22 20
19
ALWAYS install Anti-tip device provided. NEVER put a TV on this product. NEVER
allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open
more than one drawer at a time. Place heaviest items in the lowest drawers.
This is a permanent label. Do not remove!
4/35
31
29
32
34
33
30
x2
1
E x 18
CL x 3
3 x 12 mm
L300 mm
CR x 3 L300 mm
Fix rail(CL) to board 3 with screw(E) as shown. Fix rail(CR) to board 4 with screw(E) as shown.
CL 3E
E
E E
E
CL E
E
3E
CL
E
E
CL
E
E E
E E
CR E
E
CR
4
E
E
CR
4E CR
E
E CL E
E CR E E
5/35
2
A x 10 6 x 35 mm
Screw eccentric rod(A) into board 3 and 4 with a screwdriver as shown.
A
A
3
A
AA
A
A
4
AA
4
A
6/35
3
B x 5
C x 3
15 x 10 mm
6 x 30 mm
Connect board 10, 11, 12 and 13 to board 3 using wooden dowel(C), add cam lock(B) into 10, 11, 12 and 13 and turn clockwise to tighten as shown.
10
12
B C
13
B C
3
B
11
B B
C
13
B C 3 180°
7/35
4
Insert back board 9 along available grooves as shown.
10 9
12
11
13 3
8/35
5
B x 9
C x 3
15 x 10 mm
6 x 30 mm
S x 4
Connect board 10, 11, 12 and 13 to board 4 using wooden dowel(C), add cam lock(B) into 3, 4, 10, 11, 12 and 13 and turn clockwise to tighten as shown.
C
4 C BB
12
B
C
S
13
B
B
10
3
B
B
BB
S
S
11
S
C
4
180°
12 B
3S
9/35
6
A x 6 6 x 35 mm
Screw eccentric rod(A) into board 14 with a screwdriver as shown.
AA
A 14
AA A
A
14
7
B x 2
C x 2
15 x 10 mm
6 x 30 mm
Connect board 14 to board 3 and 4 using wooden dowel(C), add cam lock(B) into board 13 and turn clockwise to tighten as shown.
14
C
C 13 B B4 3
11
10/35
14 C
13
B
180°
8
C x 4 6 x 30 mm
Insert back board 9 along available grooves as shown. Insert wooden dowel(C) into board 3 and 4 as shown.
C
C
9
C
C
10
4
3
11/35
9
A x 4 6 x 35 mm
Screw eccentric rod(A) into board 1 with a screwdriver as shown.
A A
A A
1
A
1
12/35
10
B x 4 15 x 10 mm
Cover board 1 to the top, add cam lock(B) into board 3 and 4, then turn clockwise to tighten as shown.
1
B
B B
B
4
3
1
180° B
4
13/35
11
A x 6 6 x 35 mm
Screw eccentric rod(A) into board 4 with a screwdriver as shown.
A
4 1
A
3
A
A
A
AA
4
14/35
12
A x 6 6 x 35 mm
Screw eccentric rod(A) into board 6 and 8 with a screwdriver as shown.
A A
A
A6 8
A A A
8
15/35
13
B x 6 15 x 10 mm
C x 4 6 x 30 mm
Connect board 7 to board 6 and 8 using wooden dowel(C), add cam lock(B) into board 7, then turn clockwise to tighten as shown.
C B
6
CB
B
C
7
B
B
8
C
B
C
6 7
180° B
16/35
14
A x 6 6 x 35 mm
Screw eccentric rod(A) into board 5 with a screwdriver as shown.
A AA
A A
A
5
A
5
17/35
15
B x 6 15 x 10 mm
C x 4 6 x 30 mm
S x 2
Connect board 5 to the assembled components using wooden dowel(C), add cam lock(B) into board 6,7,8 and turn clockwise to tighten as shown.
B
7
C 180° 5
5
S
6
7 8
BB
B
BB
B C
C
C
C
5
S
S
18/35
16
B x 6 15 x 10 mm
C x 4 6 x 30 mm
Connect the two assembled components using wooden dowel(C), add cam lock(B) into board 6,7 and 8, then turn clockwise to tighten as shown.
1 3
4
C
B
C
BC
B B
B
B8
4
6 7
CB
6
180°
5
19/35
17
Connect board 17 and 18 by available grooves as shown.
17 17 17
18 18
Attach board 15 and 16 to board 17 and 18 as shown.
16
15 17
18
16
15
20/35
18
Put the whole assembled grid into the storage box as shown.
15
15
6
1 4
3
8 5
21/35
F x 2
19
G x 4 3.5 x 14 mm
Fix hinge(F) to smart mirror board 2 with screw(G) as shown.
2
G G
F
G G
F
2
G
G
F
22/35
20
G x 8 3.5 x 14 mm
Assemble smart mirror board 2 to board 6 by fixing hinge with screw(E) as shown. Put the electric wire thru the hole as shown.
G
6G G
2
G
6
Gx4
6
Gx4
8 5
1
4
3
23/35
M x 8
H x 1
J x 1
21
4 x 14 mm
Install the safety crank(H) and (J) to smart mirror board 2 and board 6 with screw( ) as shown.
J
5
H
1
2
2
J
J
6
8 5
4
3
24/35
L x 2
22
P x 8
M x 2
4 x 14 mm R x 1
N x 8
3 x 16 mm
Fix Anti-tipover strap(L) to the back side of board 3 and 5 with screw(M) as shown. Insert buckle(N) into back slots and fix with screw(P) as shown. Connect the electric wire and power adapter as shown.
L M
3
L
1
M PN
N
2
P9 P
N
6
PN
L
NP
M
4
P
9
N P
N
NP
5
9
3
25/35
23
D x 6 4 x 35 mm
Fix board 24, 25, 26 to board 23 with screw(D) as shown.
D D
D
25
D
23
26
D D
24
23
D
24
D
24
Insert back board 27 along available grooves as shown.
27 25
26 23
24
26/35
25
A x 5 6 x 35 mm
x 2 3.5 x 14 mm
Q x 1
Screw eccentric rod(A) into board 28 s shown.
Fix handle(Q) to board 28 with screw( ) as shown.
A A
A
A A 28
Q
28 Q
26
B x 5 15 x 10 mm
Connect board 28 to the top, add cam lock(B) into board 24, 25, 26, then turn clockwise to tighten as shown.
A A
28
28
BB
25
B
BB
26
27
24
28
180° 26 B
27/35
27
E x 6 3 x 12 mm
DL x 1 L300 mm
DR x 1 L300 mm
Fix runner(DL) and (DR) to board 24 and 25 with screw(E) as shown.
E E E
DL
25
24 E
E E
DR
28
E
E DL E
E
E DR E
E
24
DR
28
D x 12 4 x 35 mm
Fix board 32, 33, 34 to board 31 with screw(D) as shown.
D D
D
33
D
31
34
D D
32
28/35
31
D
32
D
x2
29
Insert back board 29 along available grooves as shown.
29 33
34 31
32
30
A x 10 6 x 35 mm
G x 4 3.5 x 14 mm
Q x 2
Screw eccentric rod(A) into board 30 with a screwdriver as shown. Fix handle(Q) with screw(G) as shown.
A A
A G
A
G
A 30
Q
G 30 G
Q
29/35
x2
A A
30
x2
B x 10
31
15 x 10 mm
Connect board 30 to the top, add cam lock(B) into board 32, 33, 34, then turn
clockwise to tighten as shown.
30
B
B
B 33
B
34
B
29
32
30 180°
34 B
x2
32
E x 12 3 x 12 mm
DL x 2 L300 mm
DR x 2 L300 mm
Fix runner(DL) and (DR) to board 32 and 33 with screw(E) as shown.
32 E
E
E DR
E
E
DL E
30
33
30/35
E
E DL E
E
E DR E
E
32
DR
x2
33
Connect board 21 and 22 by available grooves as shown.
21 21 21
22 22
Attach board 19 and 20 to board 21 and 22 as shown.
19
21
22
20
20 19
31/35
34
Put the whole assembled grid into the drawer as shown.
19 19
28
32/35
35
Align rails, insert all drawers in.
2
8
1
5
28
3
30
30
33/35
36
D x 2 4 x 35 mm
K x 2
6 x 30 mm
WALL
x2
WALL
K
D
L
WALL
drilling hole 6 x 30 mm
x2
WALL
K
x2
K LD
K LD
A) Select the location to place the Dresser. B) Mark location on the wall
where the Safety Strap(L) will be anchored(position for Wall Anchor[K]). C) On
the marked location, drill a hole in wall that will fit(K). D) Fit (K) into
the drilled hole. Ensure that the wall anchor fits securely in the wall. E)
Use Screw(D) to affix the free end of Strap(L) to the wall anchor. F) Connect
the power adapter to the wall outlet.
34/35
37
If doors are still not aligned if the hinges are properly correctly, please
watch the video. https://youtu.be/n0Lb36SoODM If there is misalignment after
you install, adjust the screw to the best condition.
35/35
WARRANTY
WARRANTY CLAIMS
·There is a 30-day warranty for broken furniture or any other problems that do
not work properly. The warranty will start from the date of purchase which
must be verified by proof of purchase.
·Before making a claim, we may be able to answer your query, simply call us.
Please leave your purchase order number, along with some details of the
problem, if you want a replacement part. We will arrange within 48 hours. If
there is out of stock, we will reply with a shipping date.
·The product must be used in accordance with the instructions provided. For
health reasons.
·For other reasons, if the furniture needs to be returned, it must be cleaned
and dried and operated within 30 days of receipt.
Type of Warranty Claim
·Failure to follow the furniture instructions will invalidate the warranty.
Attention please. ·Does not include damage during installation, but includes
damage during transportation.
Scope of responsibility
·Shall not bear any responsibility for misuse or user damage and / or loss of
parts during the installation of furniture.
·After using, the damage and scratches of the furniture are not covered by the
warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
·Sheet parts: 1 month from the date of purchase. ·Electrical parts: 1 month
from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
·If you have purchased and have simply changed your mind, follow the
retailer’s instructions for returns.
DEFECTIVE ITEMS
·If your item is defective in any way, i.e. it doesn’t work but you can’t
identify why, in the first instance, please call us.
DAMAGED ITEMS
·If you receive an order with obvious shipping damage from the retailer, then
we suggest the delivery is refused. If the delivery has been accepted and then
shipping damage is found, please follow the specific instructions advised by
the retailer. In all circumstances please save all packaging material and
paperwork for the order. Please be aware that if you dispose of packaging
material or attempt to return the merchandise without contacting the
fulfiller, you jeopardise your chances of making a claim, and you may not
receive a credit for the return.
AFTER-SALES CONTACT