DAEWOO FD-40M 16 Inch Chrome Pedestal Fan User Manual

DAEWOO FD-40M 16 Inch Chrome Pedestal Fan

Specifications:

• Product: 16 Chrome Pedestal Fan
• Model No.: COL1608
• Intended Use: Household use only
• Suitable Age: Children aged 8 years and above

Product Usage Instructions

• Safety Instructions:
  Before using the 16 Chrome Pedestal Fan, carefully read and understand all safety instructions provided in the user manual. Failure to do so may result in personal injury or damage to the product.

• Initial Inspection:
  Before plugging the unit into the mains, visually inspect the fan to ensure it is intact and has not suffered any transit damage.

• Power Supply:
  Check that the voltage indicated on the data plate matches the local network before connecting the appliance to the mains power supply.

Usage Guidelines:

• Always use the appliance on a solid, level surface.
• Do not leave the appliance unattended during use or while connected to the mains supply.
• Avoid using the appliance outdoors.
• Do not use any accessories or attachments not supplied or recommended by the supplier.

Maintenance and Repairs:
Unplug the power cord after use, before cleaning, and during repairs. Electrical repairs should only be performed by qualified personnel to avoid risks.
Cable Safety:
Avoid letting the mains cable hang over sharp edges or contact hot surfaces. Do not run the cable under carpets or rugs.
General Guidelines:
This appliance is suitable for children aged 8 years and above. Children should be supervised when using the fan. Keep children under 3 years away unless continuously supervised.
Usage Environment:
Do not operate the appliance with a damaged plug or cord. Regularly inspect the mains cable for any signs of damage. Do not allow the appliance to be used for industrial purposes.

FAQ:

• Q: Can I use this pedestal fan outdoors?
  A: No, this appliance is designed for indoor household use only. Do not use it outdoors.

• Q: Can children use this fan?
  A: Children aged 8 years and above can use this fan under supervision. Children under 3 years should be kept away unless continuously supervised.

QUIET NOISE 16″ CHROME

PEDESTAL FAN

USER MANUAL

Subject to registering your extended guarantee online, please refer to the Instruction Manual for further guidance.

READING AND STORING THE USER MANUAL

Before using this product, please read through this manual carefully paying particular attention to the safety instructions. Failure to do so may result in personal injury or damage to the product.
Carefully save this instruction manual for future reference. Ensure the user manual is included when passing the product on to any third parties.
Only use the product as described in this user manual. Any other use is considered improper and may result in damage to property or persons. The manufacturer or vendor cannot be held liable for damages or injury incurred through improper or incorrect use

• Read and familiarise yourself with all operating instructions before using this 16″ Copper Pedestal Fan.
• Before plugging your unit into the mains, visually check thi the unit is intact and has not suffered any transit damage.
• DO NOT use this product with a programmer, timer, separate remote control system or any other device.
• Check that the voltage indicated on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without sunervision.
• Close supervision is required when using this appliance near children.
• Never leave this appliance within reach of children.
• Children of less than 3 years should be kept away unless continuously supervised.
• DO NOT immerse the appliance or its cord in water or any other liquids.
• DO NOT leave the appliance unattended during use.
• DO NOT leave the appliance unattended whilst connected to the mains supply.
• Always use this appliance on solid, level, surface.
• DO NOT use this appliance outdoors.
• DO NOT use any accessories or attachments with this appliance other than those supplied or recommended by the supplier.
• It is imperative to unplug the power cord after the appliance has been used, before it is cleaned and whilst being repaired.
• Repairs to electrical appliances should be performed by qualified personnel. Improper repairs may place user at serious risk.
• DO NOT operate this appliance with a damaged plug or cord, after a malfunction or after being dropped or damaged in any way.
• Regular, periodic checks should be carried out on the mains cable to ensure no damage is evident. Should there be any signs of damage the appliance should not be used.
• It the power cable is damaged, it should only be replaced bv suitablv qualified personnel in order to avoid a hazard.
• DO NOT allow the mains cable to hang over sharp edges or come into contact with hot surfaces.
• DO NOT run the mains cable under carpets, rugs etc. • This appliance is intended for household use only and should not be used for industrial purposes.
• DO NOT use this appliance for anything other than intended use.
• DO NOT push objects (including fingers) into the fan grill or any openings as this could risk injury or damage to the appliance.
• Unplug after each use. Grasp the plug not the cord.

THIS APPLIANCE MUST BE EARTHED

Explanation of Symbols

The following warning symbols or words are used in this instruction manual:

****Products labeled with UK Conformity Assessment identifies products conforming to UK statutory requirements.
Products labeled with this symbol conform to applicable provisions of the European Economic Area.

You should now recycle your waste electrical goods and in doing so help the environment. This symbol means waste electrical products at the end of their useful life should not be disposed of with normal household waste and not sent to landfills. Please ensure it is taken to a suitable facility for disposal. Check with your Local Authority or retailer for recycling advice or visit www .recvcle-more.co.uk or www.weeeireland.ie enter your postcode to find out your nearest recycling site.

This symbol indicates that the supply uses an alternating current mains supply.

Customer Support Should you require any product information, replacement parts or accessories, please contact our customer core team at help@daewooelectricals.com or call 0161 831 7879.

• Replacement parts and accessories are guaranteed for 1 year from the date of purchase.
• It is important to note that your warranty becomes invalid should non Daewoo parts or accessories be used with this appliance

Before first use of Your Pedestal Fan

• Remove all packing materials and discard  responsibly.
• Ensure all parts are present – see Description of Parts below.
• Check that there is no transit damage to the mains cable or product.

Description of Parts

1. Front Guard
2. Front Guard Screw (x1)
3. Acrylic Fan Blade
4. Rear Guard
5. Front Guard Nut (x1)
6. Stand
7. Pivot Screw
8. Tilt Screw
9. Motor Housing
10. On/Off/Speed Control|
11. Oscillating Control
12.  Motor Spindle
13. Fan Blade Retaining Nut
14. Guard Clips
15. Stand Base
16. Weight
17. Clamping Washer
18. L – Shaped Screw
19. Locking Screw (not shown)
20. Pivot Bolt (not shown)

Assembling Your Pedestal Fan – Fitting the Base (15)

1. Attach the Stand (6) to the Base (15) as follows: Place the Weight (16) and Clamping Washer (17) on the underside of the Base (15) as shown left.
   Thread the L – Shaped Screw (18) through the assembly and into the thread in the Stand (6). Tighten firmly but do not overtighten.

2. Place the stand onto its Base (15) and attach the Motor Housing (9) to the top of the Stand (6) as follows:

3. Remove all the screws, etc. (7, 8, 19 & 20) from the motor housing bracket as shown right:

4. Hold the Motor Housing (9) and carefully place it on top of the Stand (6) such that the holes in the motor bracket align with the holes in the Stand (6).

5. Thread the Pivot Bolt (20) through the motor bracket and screw in the Locking Screw (19) into the hole in the motor bracket but do not fully tighten.

6. Fit the Pivot Screw (7) onto the end of the Pivot Bolt (20) and screw in the Tilt Screw (8). Hold the Motor Housing (9) upright and tighten the Pivot Screw (7) and the Tilt Screw (8).

Fitting the Fan Guard and Fan Blade

1. Remove any protective sleeving (if fitted) from the Motor Spindle (12) and discard responsibly.
2. Remove the four screws from the front of the Motor Housing (9).
3. Attach the Rear Guard (4) to the Motor Housing (9) using the four screws removed. Ensure the carry handle on the Rear Guard (4) is uppermost.
4. Place the Fan Blade (3) over the Motor Spindle (12) ensuring that the spline in the motor spindle aligns with the notch (arrowed left) in the fan blade as it is pushed onto the spindle.
5. Screw on the Fan Blade Retaining Nut (13 – arrowed right) and tighten.NB the Fan Blade Retaining Nut (13) is reverse threaded, i.e. it screws on anticlockwise.
6. Remove the Front Guard Nut & Screw (5 & 2) from the Front Guard (1).
7. Turn the Guard Clips (14) around the outside edge of the Front Guard (1) outwards.
8. Hang the Front Guard (1) by its hook (arrowed right) over the top of the Rear Guard (4).
9. Bring the Front Guard (1) down to meet the Rear Guard (4) and push the Guard Clips (14) inwards until the Front Guard (1) is fastened to the Rear Guard (4).
10. Finally fit the Guard Nut and Screw (5 & 2) through the holes in the bottom edge of the guard and tighten with a suitable pozidrive screwdriver (not supplied).
    NB this nut and screw must be fitted so that the guard cannot be removed accidentally.

Using Your Pedestal Fan – Adjusting the Tilt Angle

Place the fan in the desired position and ensure that it is vertical and stable. The fan guard can be tilted up and down to alter the direction of the airflow. To do this, slacken the Pivot Screw (7) and the Tilt Screw (8). Set the position of the fan and then tighten the two knobs (7 & 8) NB do not adjust the fan whilst connected to the mains. Using Your Pedestal Fan – Adjusting the Fan Height

• Before adjusting the height, hold the Motor Housing (9) to prevent it   dropping down.
• Loosen the height locking screw (a – left) and raise or lower the height of the fan to the desired position and retighten the screw.
• NB do not adjust the fan whilst connected to the mains.

Setting the Fan Speed

To operate the fan, ensure that the On/Off/Speed Control (10) is in the ‘O’ position.

• Insert the mains plug into the nearest socket.
• Rotate the On/Off/Speed Control (10) as follows:
• Insert the mains plug into the nearest socket. Rotate the On/Off/Speed Control (10) as follows:
• Return the control to the 0 position to switch the fan off.

Oscillation Mode

• Press the Oscillation Control (11) down to enable the fan to oscillate from side to side.
• Pull the control up to stop the fan   oscillating.

Care and Maintenance

Ensure that the fan is switched off and it is not connected to the mains supply before cleaning. Wipe the fan clean with a clean, soft damp cloth. Do not immerse the fan or its cord in water or any other liquid.

Non-Rewireable Mains Plug

If your appliance is supplied with a non-rewireable plug fitted to the mains lead and should the fuse needed replacing, you must use an ASTA approved one (conforming to BS 1362 of the same rating). Never use a plug with the fuse cover missing. If in doubt, consult a qualified electrician.

If you need to remove the plug -DISCONNECT FROM THE MAINS- and then cut it off the mains lead and immediately dispose of it safely. Never attempt to reuse the plug or insert it into a socket outlet as there is a danger of electric shock.

Technical Specification

Disposal of the Packaging

• Dispose of paper and cardboard in appropriate paper recycling facilities.
• Dispose of recyclable plastics in appropriate plastic recycling facilities.
• Dispose of non-recyclable plastics in the appropriate plastics collection service.

Disposal of the Packaging

You should now recycle your waste electrical goods and in doing so help the environment. This symbol means waste electrical products at the end of their useful life should not be disposed of with normal household waste and not sent to landfill. Please ensure it is taken to a suitable facility for disposal. Check with your Local Authority or retailer for recycling advice or visit www .recycle-more.co.uk enter your postcode to find out your nearest recycling site.

WARRANTY

Thank you for purchasing your Daewoo product.

As part of our commitment to quality, we are offering you an extra 2 years warranty in addition to your 1 year guarantee
Your Daewoo vacuum product is guaranteed for 1 year from the date of original purchase, with proof of purchase or receipt. If any defect should occur due to faulty workmanship or material, your faulty vacuum should be returned to the place of purchase, replacement or refund is at the discretion of the retailer.

The guarantee is subject to the following provisions:

• The product must be correctly installed and operated in accordance with the requirements contained in the instruction manual.
• The product must be used solely for domestic purposes.
• It does not cover general wear and tear, damage, misuse or any consumable parts.
• The guarantee will be rendered invalid if the product is re-sold or has been damaged through inexpert repair.
• The guarantee is only valid within the UK and Eire.

Your standard 1 year guarantee will only be extended to the maximum available for your individual product upon registration. (Note: products must be registered individually and covers the main body and housing). If you do not register your product within 28 days of the original purchase date, your product will only be guaranteed for 1 year.

To validate your extended 2 year warranty*please register your purchase online within 28 days of the original purchase date by registering at:
https://help.daewooelectricals.com or Contact Us (daewooelectricals.com)

*Your extended warranty is only valid with proof of purchase receipt and   subject to the conditions outlined above.

Daewoo is a registered trademark. Produced and imported under license by Eurosonic Group Limited Brightgate House 1 Brightgate Way Manchester M32 OTB UK EU Rep: EuroSonic Magppie (ESM) Ltd. Ireland D05 X006 www.esgltd.com

References

• Daewoo Electricals | Official UK Daewoo Online Shop
• Everything you need to know to Recycle More
• WEEE Ireland Waste Electrical and Electronic Equipment Recycling
• Daewoo Electricals

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>