AKG HYBRID Hybrid Audio Science Review User Guide
- June 11, 2024
- AKG
Table of Contents
- AKG HYBRID Hybrid Audio Science Review
- Product Information
- Product Usage Instructions
- Frequently Asked Questions
- WHAT’S IN THE BOX
- APP
- POWER ON & CONNECT
- CONTROLS
- AUTO PLAY/PAUSE
- WIRED LISTENING MODE
- CHARGING
- FACTORY RESET
- LED BEHAVIORS
- TECH SPEC
- Compliance Information on Ear Cup
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AKG HYBRID Hybrid Audio Science Review
Product Information
Specifications
- Model: N9 HYBRID
- Driver size: 40 mm / 1.57 Dynamic Driver
- Power supply: 5V 1A
- Max input power: 30 mW
- Weight: 281 g / 0.62 lbs
- Battery type: Lithium-ion battery (1050 mAh / 3.8V)
- Charging time: 3 hrs from empty
- Music playtime with BT on and ANC off: Up to 100 hrs
- Music playtime with BT on and ANC on: Up to 55 hrs
- Music playtime with 2.4G on and ANC off: Up to 85 hrs
- Music playtime with 2.4G on and ANC on: Up to 45 hrs
- Music playtime with AUX and ANC on: Up to 40 hrs
- Talk time with ANC on (BT): Up to 35 hrs
- Talk time with ANC on (2.4G): Up to 30 hrs
- Frequency response (Passive): 10 Hz – 40 kHz
- Frequency response (Active): 10 Hz – 40 kHz
- Microphone frequency response:
- Impedance: 32 ohm
- Sensitivity: 98 dB SPL@1 kHz
- Maximum SPL: 95 dB
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Bluetooth version: V5.3
- Bluetooth profile version:
Product Usage Instructions
1. Power On & Connect
To power on and connect, follow these steps based on your device:
- Android phone/tablet:
1. Manual Pairing: Press and hold the power button until the LED indicator flashes.
2. Select “AKG N9 Hybrid” in your device’s Bluetooth settings to connect.
- Laptop PC/MAC:
1. Select “AKG N9 Hybrid” in your device’s Bluetooth settings to connect.
2. If using for the first time, go to Sound Settings -> Sound Control Panel on your PC and set AKG N9 Hybrid as the default device in the Playback and Recording tabs.
Frequently Asked Questions
Q: How do I reset the device to factory settings?
A: To perform a factory reset, press and hold the power button for 5 seconds until the LED indicators flash.
WHAT’S IN THE BOX
APP
POWER ON & CONNECT
MULTI-POINT CONNECTION
FIRST TIME SETUP ON PC
Go to “Sound Settings” -> “Sound Control Panel”. Then select ” AKG N9 Hybrid” as the default device in the “Playback” and “Recording” tabs.
DUAL SOURCE SWITCHING
CONTROLS
AUTO PLAY/PAUSE
WIRED LISTENING MODE
SILENTNOW
VOICEAWARE
SMART TALK
DO MORE WITH THE APP
CHARGING
FACTORY RESET
LED BEHAVIORS
TECH SPEC
- Model: N9 HYBRID
- Driver size: 40 mm/1.57″ Dynamic Driver
- Power supply: 5V 1A
- Max input power: 30 mW
- Weight: 281 g/ 0.62 lbs
- Battery type: Lithium-ion battery (1050 mAh/ 3.8V)
- Charging time: 3 hrs from empty
- Music playtime with BT on and ANC off: Up to 100 hrs
- Music playtime with BT on and ANC on: Up to 55 hrs
- Music playtime with 2.4G on and ANC off: Up to 85 hrs
- Music playtime with 2.4G on and ANC on: Up to 45 hrs
- Music playtime with AUX and ANC on: Up to 40 hrs
- Talk time with ANC on (BT): Up to 35 hrs
- Talk time with ANC on (2.4G): Up to 30 hrs
- Frequency response (Passive): 10 Hz – 40 kHz
- Frequency response (Active): 10 Hz – 40 kHz
- Microphone frequency response: 20 Hz – 16 kHz
- Impedance: 32 ohm
- Sensitivity: 98 dB SPL@1 kHz
- Maximum SPL: 95 dB
- Microphone sensitivity: -38 DVB/Pa@1 kHz
- Bluetooth version: V5.3
- Bluetooth profile version: A2DP V1.4, AVRCP V1.6.2, HFP V1.8
- Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: <11 dBm (EIRP)
- Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
- 2.4GHz Wireless carrier frequency: 2.4 GHz – 2.4835 GHz
- 2.4GHz Wireless transmitter power: <9 dBm (EIRP)
- 2.4GHz Wireless modulation: GFSK
- Maximum operation temperature: 45°C
To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-AKGN9H) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.403 W/Kg.
The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-AKGN9HTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for body use is 0.154 W/Kg.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-AKGN9H
Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.
IC: 6132A-AKGN9HTM
Compliance Information on Ear Cup
Warning
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS\
- Headset (Model: N9 HYBRID)
- Dongle (Model: N9HYBRIDTM
Points de collecte sur www.quefairedemesdechets.fr
BLUETOOTH
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Product specifications and app screens are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>