DT Research 313T-MD Rugged Tablets User Guide
- September 4, 2024
- DT Research
Table of Contents
- DT Research 313T-MD Rugged Tablets
- Product Usage Instructions
- BASIC OPERATION GUIDE
- PACKAGE CONTENTS
- Input/ Output Ports
- PRECAUTIONS
- OPERATION
- Wireless Networking
- USING THE MOBILE TABLET
- Federal Communication Commission Interference
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DT Research 313T-MD Rugged Tablets
Specifications
- Brand: DT Research, Inc.
- Model: 313T/MD
- Address: 2000 Concourse Drive, San Jose, CA 95131
Product Usage Instructions
Powering ON and OFF
To activate the 313T/MD, push and quickly release the Power Button. The
display will come on in a few seconds. To put the 313T/MD in Standby mode,
push and quickly release the Power Button. To turn the 313T/MD off for
extended storage, power off safely using any software function that shuts down
the computer provided in the software operating system.
Charging the Battery
When charging the battery pack(s), ensure that the blue-colored Battery LED
blinks slowly. If it does not, try unplugging and replugging the AC-DC adapter
to activate the charging process.
Starting Up
If the power-up is successful, the appropriate interface will be displayed
after a launch sequence of several seconds. The wireless LAN connection may
take 10-15 seconds to be established
Configuring the Tablet
The 313T/MD can be configured using the utilities and methods dictated by
the software operating system. It should be configurable for various
properties such as user profiles, network features, and several system
elements.
Using Peripherals
The 313T/MD supports a wide range of USB-based peripherals through its USB
port. These peripherals can be used for software installation, application
storage, data storage, and system software recovery and updates.
Holding the Tablet
Left hand: grip the left back side of the tablet with your left hand
four index fingers, with thumb resting on the top of the back side of the
tablet and palm securely against the back. Right hand: grip the right back
side of the tablet with your right hand four index fingers, with thumb resting
on the top of the back side of the tablet and palm securely against the back.
FAQ
-
Q: How do I know if my battery pack is charging?
A: Ensure that the blue-colored Battery LED blinks slowly when charging. If it does not blink, try unplugging and replugging the AC-DC adapter to activate the charging process. -
Q: Where can I find additional operation guides for specific modules?
A: Users can download the Tablet Modules Basic Operation Guides from the DT Research website for more support.
BASIC OPERATION GUIDE
313T/MD
INTRODUCTION
Thank you for acquiring the 313T/MD, part of DT Research’s line of rugged
tablets. Featuring a slim, robust enclosure, the 313T/MD with a 13.3” TFT
display is powered by the Intel® processor, offering optimal combinations of
performance and power savings.
The 313T/MD is available with Microsoft® Windows® operating system. Each
software operating system features web browser, client/server computing
software, media player, accessories, and applications support.
PACKAGE CONTENTS
-
One 313T/MD with Battery Pack and Handstrap
-
AC-DC Power Adapter with Power Cord
-
Basic Operation Guide
-
If your 313T/MD contains Barcode Scanner or Front/Back Camera modules, please refer to the Tablet Modules Basic Operation Guide for detailed operation.
Input/ Output Ports
- A Ethernet Port
- B HDMI-out
- C USB 2.0 Ports
- D Headphone-out
- E USB 3.0 Port
- F DC-in
BUTTON | ACTION |
---|---|
1 | Programmable Button |
2 | Power Button |
3 | Trigger button |
4 | Battery Latch |
Power/Battery LED Status
- Blue indicates the battery is 25% to 100% charged
- Blinking blue indicates the battery is charging
- Orange indicates that the battery is between 11% to 25%
- Blinking Orange indicates that the battery is below 10%
PRECAUTIONS
- Always exercise care when operating and handling the 313T/MD
- Do NOT apply excessive pressure to the display screen.
- We recommend using the Digital Pen (optional) to keep the screen clean.
- Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the 313T/MD should face away from direct light to reduce glare.
- If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter other than the one provided or acquired from the manufac-turer or its partners.
- In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the 313T/MD and disconnect all power sources. Report the problem to your device provider immediately.
- Never attempt to disassemble the 313T/MD, as this will void the warranty.
BASIC FEATURES
The 313T/MD wireless tablet integrates a bright and multi-touch display, one
USB port, and embedded networking elements such as wireless LAN. The 313T/MD
is complemented by a suite of accessories, including battery expansion,
charging cradles, and battery charger kit, for a comprehensive user
experience.
A 313T/MD typically integrates an 802.11ac wireless LAN (WLAN) adapter that
may connect to other wireless devices or access points. If your 313T/MD does
not come with such a network adapter, please consult your device provider to
establish the desired network connectivity.
OPERATION
Powering ON and OFF
To activate the 313T/MD, push and quickly release the Power Button. The
display will come on in a few seconds. To put the 313T/MD in Standby mode,
push and quickly release the Power Button. To turn the 313T/MD off for extended
storage, power off safely using any software function that “shuts down
computer” provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use the
AC-DC adapter with the 313T/MD when setting up for the first time to fully
charge the internal battery pack. You may charge the external battery pack
with it attached to the 313T/MD, or with the optional external battery charger
kit.
NOTE:
When the batterypack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/replugging the AC-DC adapter to the 313T/MD a
few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
Start Up
If the power up (from Standby mode or otherwise) is successful, the
appropriate interface will be displayed after a launch sequence of several
seconds. The wireless LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The 313T/MD may be configured using the utilities and methods dictated by the
software operating system. The 313T/MD should be configurable for various
properties such as user profiles, network features, and several system
elements.
Wireless Networking
Wireless LAN
The 313T/MD is often delivered with an embedded (user-inaccessible) 802.11ac
WLAN adapter equipped with a hidden custom antenna.
- Through the support of typical WLAN adapters, the 313T/MD should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection.
- The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 313T/MD and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
- When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc.
- Refer to the access point operating manuals for setting up the 802.11 access points.
USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the 313T/MD supports a wide range of USB-based
peripherals. These peripherals are applicable for software installation,
applications storage, data storage, and system software recovery and updates.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT
Research website.
To Hold the Tablet
Left hand: grip the left back side of the tablet with your left hand four
index fingers, with thumb resting on the top of the back side of the tablet
and palm securely against the back.
Right hand: grip the right back side of the tablet with your right hand
four index fingers, with thumb resting on the top of the back side of the
tablet and palm securely against the back.
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
This Class [B] digital apparatus complies with Canadian ICES-003.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>