DT Research 504T Medical-Grade Integrated LCD System User Guide

: June 6, 2024
: DT Research

Table of Contents

DT Research 504T Medical-Grade Integrated LCD System
I/O Ports
Cleaning the Screen
Cleaning the Anti-microbial Enclosure
INTRODUCTION
PACKAGE CONTENTS
PRECAUTIONS
BASIC FEATURES
Attach The Tabletop Stand (Optional)
Detach the Tabletop Stand (Optional)
Powering ON and OFF
Wireless Networking
Federal Communication Commission Interference
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DT Research 504T Medical-Grade Integrated LCD System

I/O Ports

The Medical-Grade Integrated LCD System has a comprehensive set of I/O ports. The following ports are located along the bottom side of the unit.

DT Research 504T Medical-Grade Integrated LCD System 1

Power button
USB 3.0 ports
Programmable buttons
Ethernet ports (RJ45)
Speakers
Audio jack
DC-in
USB 2.0 ports
HDMI output
COM ports
Potential equalization conductor (optional

Cleaning the Screen

A screen cleaning solution that is alcohol-free and non-abrasive can be used to clean the touch screen.
Cleaning with a micro-fiber cloth is recommended.
Please spread the solution onto the cloth and then clean the touch screen.

Cleaning the Anti-microbial Enclosure

Use a soft/non-abrasive cloth moistened with water to clean the enclosure.
If using a cleaner, an alcohol-free and oxide-free cleaning liquid is recommended.
To prevent scratching the anti-microbial coating, please wipe gently.

INTRODUCTION

Thank you for acquiring DT Research’s Medical-Grade Integrated LCD System. With a 23.8- inch or 27-inch TFT display and powered by the Intel® Core™ i processor, the Medical-Grade Integrated LCD System offers optimal combinations of performance and power savings. With fully-integrated point-of-care modules within an elegant, space-saving design, the Medical-Grade Integrated LCD System is the optimum solution to enhance workflow and service. Please take a few moments to review the contents of this document to ensure that the setup and startup proceed smoothly. The Medical-Grade Integrated LCD System is ready for use, out of the box, in its default configuration when powered by the power source provided. The following documentation offers guidance on the hardware elements and features of the computer. Please refer to your device provider for information pertaining to the software operating system or software applications.

PACKAGE CONTENTS

504T
AC-DC power adapter with power cord
Basic operation guide

PRECAUTIONS

Always exercise care when operating and handling the Medical-Grade Integrated LCD System.
Never disassemble any portion of the enclosure, as this will void any product warranty on the Medical-Grade Integrated LCD System.
Do not use any AC/DC adapter other than the one provided with the device or a replacement acquired from the manufacturer.
In the unlikely event that smoke, abnormal noise or strange odor is present, immediately power down the Medical-Grade Integrated LCD System and disconnect all power sources. Please report the problem to your device provider immediately.

BASIC FEATURES

The Medical-Grade Integrated LCD System integrates a bright 23.8” or 27” display with a high performance system and USB ports for a comprehensive point-of-care solution.

Attach The Tabletop Stand (Optional)

Insert the top two tabs of the tabletop stand into the top two open slots on the 504T back
Push the latch to pivot the two lower tabs of the tabletop stand.
Push the two lower tabs into the two lower slots on the 504T back panel. Make sure the latch locks back into position so the stand is securely attached.

DT Research 504T Medical-Grade Integrated LCD System 3

Detach the Tabletop Stand (Optional)

Push the latch to pivot the two lower tabs.
Pull out the two lower tabs, then the two upper tabs from the 504T back panel.

Powering ON and OFF

Please use the AC-DC adapter with the Medical-Grade Integrated LCD System for the power supply. To activate the Medical-Grade Integrated LCD System, push and quickly release the Power Button and the display will come on in a few seconds. To put in Standby mode, push and quickly release the Power Button. To turn off for extended storage, power off the device safely using any software function that “shuts down computer” provided in the software operating system.

NOTE:
To conserve power, use (push and quick release) the Power Button to put the device in “Standby” mode while not in use. Pushing briefly on the same button will wake up the system within seconds.

Wireless Networking

Wireless LAN
The Medical-Grade Integrated LCD System is often delivered with an embedded (user- inaccessible) 802.11ac WLAN adapter equipped with a hidden custom antenna.

Through the support of typical WLAN adapters, the Medical-Grade Integrated LCD System should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection.
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the Medical-Grade Integrated LCD System and the access points have to match. The SSID is case-sensitive and it is recom- mended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly conﬁgure associated settings such as Authentication mode, etc.
Refer to the access point operating manuals for setting up the 802.11 access points.

Bluetooth
The Medical-Grade Integrated LCD System features a built-in Bluetooth adapter that operates on the Microsoft Windows Bluetooth protocol. The Bluetooth conﬁguration application is invoked from the System Tray or from the Control Panel. Follow the instructions and options provided within the application to conﬁgure and invoke Bluetooth connectivity with the corresponding peripherals.

NOTE:
Bluetooth devices or accessories that are not compatible with the Microsoft Windows Bluetooth protocol may not work with the Medical-Grade Integrated LCD System.

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This Class [B] digital apparatus complies with Canadian ICES-003.

RF Exposure Compliance
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Model No.: 504T Responsible Party – U.S. Contact Information DT Research, Inc. 2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information(RED)
To be protected against all verified adverse effects, the separation distance of at least 0.2m must be maintained between the antenna of the radio having max. 3.2dBi antenna and all persons.
The band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries. Hereby, [DT Research, Inc.] declares that the radio equipment type [504T] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.dtresearch.com.