DT Research DT301Y Rugged Tablet User Guide
- June 5, 2024
- DT Research
Table of Contents
DT301Y Rugged Tablet
User Guide
INTRODUCTION
Thank you for acquiring the DT301Y/ DT301Q, part of DT Research’s line of Rugged Tablets. Featuring a slim yet robust enclosure, the DT301Y/ DT301Q with a 10.1” TFT display is powered by the Intel® Core™ is or Qualcomm octa-core processor, offering optimal combinations of performance and power savings. The DT301Y/ DT301Q is available with Microsoft® Windows® or Android operating system. The software operating system features a web browser, client/ server computing software, media player, accessories, and application support.
PACKAGE CONTENTS
- One DT301Y/ DT301Q with Battery Pack and Handstrap
- AC-DC Power Adapter with Power Cord
- Basic Operation Guide
*If your DT301Y/ DT301Q contains a camera or barcode scanner, please refer to the Tablet Modules Basic Operation Guide for detailed operation
Input/ Output Ports
A. Headphone Jack
B. LAN Port
C. USB 3.0 Port
D. USB Type-C Port (power input)
E. Smart Card Reader (DT311Y only)
Button Functions
| BUTTON | ACTION |
|---|---|
| 1 | Power button |
| 2 | Programmable buttons |
| 3 | Battery Latch |
• Push the switch to unlock the latch, then slide the latch to the left to remove the battery.
PRECAUTIONS
- Always exercise care when operating and handling the DT301Y/ DT301Q.
- Do NOT apply excessive pressure to the display screen.
- We recommend using the Digital Pen (optional) to keep the screen clean.
- Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the DT301Y/ DT301Q should face away from direct light to reduce glare.
- If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter other than the one provided or acquired from the manufacturer or its partners.
- In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the DT301Y/ DT301Q and disconnect all power sources. Report the problem to your device provider immediately.
- Never attempt to disassemble the DT301Y/ DT301Q, as this will void the warranty.
NOTE:
To obtain protection consistent with any IP rating for the device, the I/O
(audio, power, USB, card reader, etc.) port doors must be closed. If the IP
protection is compromised by mishandling or misuse, such as by leaving port
doors open or improperly closed, any resulting product damage will not be
covered under any DT Research warranty.
BASIC FEATURES
The DT301Y/ DT301Q rugged tablet integrates a bright display, USB ports, and
embedded networking elements such as wireless LAN and Bluetooth or optional
4G.
A DT301Y/ DT301Q typically integrates an 802.11ac wireless LAN (WLAN) adapter
that may connect to other wireless devices or access points. If your DT301Y/
DT301Q does not come with such a network adapter, please consult your device
provider to establish the desired network connectivity.
OPERATION
Powering ON and OFF
To activate the DT301Y/ DT301Q, push and quickly release the Power Button. The
display will come in a few seconds. To put the DT301Y/ DT301Q in Standby mode,
push and quickly release the Power Button. turn the DT301Y/ DT301Q off for
extended storage, and power off safely using any software function that “down
computer” provided in the software operating system.
NOTE:
The battery pack shipped with your tablet may be low in power—please use the
AC-DC adapter with the DT301Y/ DT301Q when setting up for the first time to
fully charge the battery pack, or use the optional battery charger kit.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the DT301Y/
DT301Q a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick-release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
For DT301Y, avoid using the Power Button (“hold 4+ seconds” feature) to turn
off the tablet—this form of hardware shutdown is intended to be a means of
recovery from lockups, and not as a normal operation.
Start-Up
If the power-up (from Standby mode or otherwise) is successful, the
appropriate interface will be displayed after a launch sequence of several
seconds. The wireless LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT301Y/ DT301Q may be configured using the utilities and methods dictated
by the software operating system. The DT301Y/ DT301Q should be configurable
for various properties such as user profiles, network features, and several
system elements.
Wireless Networking
Wireless LAN
The DT301Y/ DT301Q is often delivered with an embedded (user-inaccessible)
802.11ac WLAN adapter equipped with a hidden custom antenna.
- Through the support of typical WLAN adapters, the DT301Y/ DT301Q should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection.
- The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT301Y/ DT301Q and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
- When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc.
- Refer to the access point operating manuals for setting up the 802.11 access points.
Bluetooth
The Bluetooth configuration application is enabled from the Windows System
Tray or from the Android Settings APP. Follow the instructions and options
provided within the application to configure and invoke Bluetooth connectivity
with the corresponding peripherals.
USING THE MOBILE TABLET
Peripherals Support
Through its USB 3.0 port, the DT301Y/ DT301Q supports a wide range of USB-
based peripherals. These peripherals are applicable for software installation,
applications storage, data storage, and system software recovery and updates.
Replacing the Battery Pack
- Slide the battery latch to the unlocked position.
- Lift the battery pack of the compartment.
- Fit another battery pack into place.
- Slide the latch to the locked position.
- If you want to purchase extra battery packs, please contact your dealers, or visit our Support page: https://www.dtresearch.com/en/Support/contact.html
CAUTION:
There is a danger of explosion if the battery is incorrectly replaced. Replace
the battery only with the Tablet manufacturer’s battery. Discard used
batteries according to the dealer’s instructions.
CAUTION:
Do not attempt to disassemble the battery pack.
For More Support,
Users can download the Tablet Modules Basic Operation Guides from the DT
Research website.
If the DT301Y/ DT301Q comes with a Mobile broadband module, please contact
your product and/or service provider for the SIM Card installation procedures.
To Hold the Tablet
Left hand: grip the left-back side of the tablet with your left hand four
index fingers, with the thumb resting on the top of the back side of the
tablet and palm securely against the back.
Right hand: grip the right back side of the tablet with your right hand
four index fingers, with the thumb resting on the top of the back side of the
tablet and palm securely against the back.
Specifications:
| Item | DT301Q | DT301Y |
|---|
System
CPU| Qualcomm Octa-Core, 2.0GHz| Intel® Core™ Comet Lake i7-10710U Processor
(12M Cache, up to 4.7 GHz)
Intel® Core™ Comet Lake i7-10510U Processor (8M Cache, up to 4.90 GHz)
Intel® Core™ Comet Lake i5-10210U Processor (6M
Cache, up to 4.10 GHz)
RAM| 4GB| 8GB to 32GB
Storage| 64GB flash| 256GB to 2TB flash
Operating System| Android 9.0 and 10| Microsoft® Windows® 10 IoT Enterprise
Display| 10.1” LED-backlight, high-brightness (1000 nits) screen with
capacitive touch, outdoor viewable
Display Resolution| 1920 x 1200| 1920 x 1200
Network Interface| Wi-Fi 802.11a/b/g/n/ac/ax, 2.4GHz/ 5GHz dual-band;
Bluetooth 5.0
Max power:| 2412-2472MHz/2422-2462MHz: ≤18.36dBm,
5150-5250MHz/5250-5350MHz/5470-5725MHz/5725-5850MHz: ≤18.16dBm
Control Switch and Buttons| 1 power button, 2 brightness control buttons, 5
programmable buttons
Indicator| 1 power/ battery status LED| 1 power/ battery status LED
Speaker| Built-in speaker| Built-in speaker
I/O Ports
USB port| USB 3.0 x 1, USB Type C x 1 (for data transmitting and charging)
Headset Jack| 1 (3.5mm)| 1 (3.5mm)
Smart Card/CAC Reader| N/A| Full-slot, reads ISO 7816 T=0, T=1; 1.8/3/5V smart
card
SD Slot| 1 micro SD card slot| N/A
Ethernet| Ethernet 10/ 100/ 1000MB Base-T LAN
Mechanical and Environmental
AC/DC Adapter| Input: 100 – 240V AC; Output: 20V DC, 3.25A
Battery Pack| Hot-swappable battery, 7.6V, 6000mAh| Hot-swappable battery,
11.4V, 5400mAh
Hot-swappable battery, 11.4V, 8000mAh (optional)
Enclosure| ABS + PC plastics and magnesium-aluminum alloy
Dimensions (H x W x D)| 7.5 x 10.98 x 0.86 in/ 190 x 279 x 21.9 mm
Weight| 3.1 lbs/ 1.4 kg| 3.1 lbs/ 1.4 kg
Regulatory| FCC Class B, CE, RoHS compliant
Operating Temperature| Operation: -10°C to 50°C (-14°F to 122°F) Storage:
-55°C to 70°C (-67°F to 158°F)| Operation: -10°C to 60°C (-14°F to 140°F),
optional -30°C to 45°C (-22°F to 113°F)
Storage: -55°C to 70°C (-67°F to 158°F)
Humidity| 0% – 90% non-condensing
FCC Regulatory Compliance
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
The device has been tested for use against the body with 0mm separation in
Specific Absorption Rate (SAR) testing.
Users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier
Trade Name: 
Model No.: DT301Y
Responsible Party – U.S. Contact Information
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
http://www.dtresearch.com
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC ID Label is in the removable battery compartment, it could be easily found
by removing the battery cover.
RF Exposure Information(RED)
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 0cm must be maintained
between the user’s body and the handset, including the antenna.
The band 5150-5350 MHz for this device is restricted to indoor use only within
all European Union countries.
Hereby, [DT Research, Inc.] declares that the radio equipment type [DT301Y] is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
http://www.dtresearch.com.
DT Research, Inc.
2000 Concourse Drive,
San Jose, CA 95131
http://www.dtresearch.com
Copyright © 2020, DT Research, Inc.
All Rights Reserved.
Documents / Resources
| DT
Research DT301Y Rugged
Tablet
[pdf] User Guide
600-AX200NG, 600AX200NG, YE3600-AX200NG, YE3600AX200NG, DT301Y, DT301Q, DT301Y
Rugged Tablet, DT301Y, Rugged Tablet
---|---
References
- DT Research | Rugged Tablets, Medical-Cart Computers and AIO Computers
- DT Research | Rugged Tablets, Medical-Cart Computers and AIO Computers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>