COMPEX WLW7002E25 Leader in OEM ODM Wireless Integration User Guide
- June 14, 2024
- Compex
Table of Contents
COMPEX WLW7002E25 Leader in OEM ODM Wireless Integration
Specifications
- Hardware Guide: hWarLdWw7a0re02guEi2d5e
- Component Map:
- CH0
- CH1
- CH2
- CH3
- Power Requirements:
- DC Power
- 5V (Max)
- Power Consumption: 13.3W
Component Map
Power Requirements
- DC Power: 5V (Max)
- Power Consumption 13.3W
For the customer who wants to use a 5V External Power Pin, please make sure pins 15, 17, 19, 21 and 23 were not connected with your board.
Edge Connector PinAssignment
M.2 edge connector pin assignment
Top side| Bottom side
1| GND| 2| VDD_3V3
3| REFCLK_IO_P0| 4| VDD_3V3
5| REFCLK_IO_N0| 6| PCIE_LED0(GPIO25)
7| GND| 8| NC
9| PTA2_BT_ACT| 10| NC
11| PTA2_BT_PRIO| 12| NC
13| PTA2_WL_ACT| 14| WSI_DAT_IN(GPIO48)
15| VDD_5V| 16| PCIE_LED1(GPIO26)
17| VDD_5V| 18| GND
19| VDD_5V| 20| WSI_CLK_IN(GPIO49)
21| VDD_5V| 22| NC
23| VDD_5V| |
Mechanical key E
33| GND| 32| WSI_DAT_OUT(GPIO50)
35| PCIE0_RX0_P| 34| NC
37| PCIE0_RX0_N| 36| WSI_CLK_OUT(GPIO51)
39| GND| 38| NC
41| PCIE0_TX0_P| 40| NC
43| PCIE0_TX0_N| 42| NC
45| GND| 44| PTA1_BT_PRIO
47| PCIE0_REFCLK_P| 46| PTA1_WL_ACT
49| PCIE0_REFCLK_N| 48| PTA1_BT_ACT
51| GND| 50| NC
53| PCIE0_CLKREQ_N| 52| PCIE0_RST_N
55| PCIE0_WAKE_N| 54| NC
57| GND| 56| WLAN_DISABLE
59| PCIE0_RX1_P| 58| NC
61| PCIE0_RX1_N| 60| NC
63| GND| 62| NC
65| PCIE0_TX1_P| 64| NC
67| PCIE0_TX1_N| 66| NC
69| GND| 68| NC
71| REFCLK_IO_N1| 70| NC
73| REFCLK_IO_P1| 72| VDD_3V3
75| GND| 74| VDD_3V3
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Systems Pte. Ltd. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice. Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6288 8220 | [email protected] | Last
Updated: 02/11/2023 MW, LL, GS, AT