Inglesina Quid 2 Passeggino Stroller Instruction Manual

Quid 2 PASSEGGINO
STROLLER

Quid 2 Passeggino Stroller

IMPORTANT – KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

|
---|---
|
|
|
|

WARNING

• IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN JEOPARDISE THE SAFETY OF YOUR CHILD.
• YOUR CHILD’S SAFETY IS YOUR RESPONSIBILITY.
• WARNING! NEVER LEAVE THE CHILD UNATTENDED: IT CAN BE DANGEROUS. PAY UTMOST CARE WHEN USING THE PRODUCT.
• TO PREVENT THE BABY FROM FALLING AND/OR SLIDING OUT WITH SERIOUS INJURY RISKS, ALWAYS USE THE SAFETY BELTS PROPERLY FASTENED AND ADJUSTED.
• This product is suitable for babies from birth up to 22 kg or 4 years, whichever comes first.
• NEVER LEAVE THE CHILD UNATTENDED.
• ENSURE THAT ALL THE LOCKING DEVICES ARE ENGAGED BEFORE USE.
• TO AVOID INJURY, ENSURE THAT THE CHILD IS KEPT AWAY WHEN UNFOLDING AND FOLDING THIS PRODUCT.
• DO NOT LET THE CHILD PLAY WITH THIS PRODUCT.
• ALWAYS USE THE RESTRAINT SYSTEM.
• THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR SKATING.
• With newborn babies, it is preferable to use the seat in its most reclined position.
• Avoid serious injury from falling or sliding out. Always use the restraint system and adjust it properly.
• The correct use of the restraint system is not a substitute for proper adult supervision.
• Be aware that the bumper bar is not an effective restraint. Always use the restraint system.
• Do not lift the stroller by the bumper bar as it may disengage.

SAFETY

• Before assembly, ensure that the product and all its components have not been damaged during transport. Should this be the case, do not use the product and keep it out of reach of children.

• For the safety of your child, remove and eliminate all plastic bags and elements belonging to the packaging before use and, in any case, keep them out of reach of newborns and children.

• This product must be used to accomodate only one child.

• Before use:
  THE CHILD
  – Make sure that the product is properly assembled, that all its components are properly fastened and that all the mechanisms are engaged. Make sure that the lining is properly secured to the structure.
  – Make sure that the chassis is fully open and ensure that all the locking devices are engaged.

• Avoid finger entrapment, take care when folding and unfolding the product.

• Always make sure that the brake is engaged when positioning the child into the stroller seat/carrycot or taking him/her out, as well as during stops, and when assembling/ disassembling any accessory.
  Always use the parking brake, even when standing still for only a few moments.

• When parking check if the brake is properly engaged bymoving forward/rearward the product.

• Never place the product close to stairs or steps even if the brake is engaged, as child movements may slide the product.

• Do not leave the stroller on a slope with the baby insideeven if the brake is engaged. Brake efficiency is limited on high gradients.

• Never use the stroller on stairs or escalators with the baby inside, as you may suddenly lose control of the product or the child may fall out. Also take extra care when going up or down a curb or other uneven surfaces.

• Maximum weight for objects placed in basket is 3 kg. Do not exceed the recommended maximum weight.

• Any load applied to the handle and/or the backrest and/or laterally to the product can compromise the stability of the product.

• Pets attached to the product may affect its stability and cause loose of control.

• Be aware of the risks related to open flames or other heat sources, such as radiators, fireplaces, electric and gas stovesetc.: do not leave the product close to these heat sources.

• Make sure that all possible sources of hazard (e.g. cableselectric wires, etc.) are kept out of reach of the child.

• Never leave the product with the child inside in places where ropes, curtains or other objects can be used by the child to climb up or cause choking or strangling hazards.

• Never lift the stroller with the child inside.

HINTS FOR USE

• Do not use the product if any part is broken, torn or missing.
• Inspect the product and its components regularly for any signs of damage and/or wear, undone stitches and tears. In the event of damage or malfunction, keep the product out of the reach of children, do not use it and/or attempt to repair it, but turn exclusively to qualified staff.
• Do not let other children or pets play unattended near the product or climb on it.
• Assembly, disassembly and adjustments must be carried out only by adults. Make sure that the person using the product (baby-sitter, grandparents, etc.) are aware of its correct operation. This product must only be used by an adult.
• While performing any adjustment, make sure that no moving part of the product (e.g. backrest, hood, etc.) comes into contact with the baby. Always make sure that the brake is duly engaged when performing these operations.
• Do not open, fold or disassemble the product with the baby inside.
• In any case, be particularly careful when performing these tasks with the child nearby.
•  Finger entrapment and scissoring actions may happen during these operations.
• Do not leave the baby in the stroller when travelling on transport means (eg. train, bus, etc).
• Do not use the stroller seat unit as a car seat.
• When the product is not used, it must be stored out of reach of children. The product shall not be used as a toy! Do not let the child play with it.
• Do not remove/attach the seat unit when your child is sitting in it and do not transport the baby in the stroller seat separately from the chassis.
• In case of prolonged exposure to sunlight, let the product cool down before using it.
• To avoid overheating and skin burns , do not expose the child to direct sunlight for prolonged period of time, even if the canopy is fully extended.

RAIN COVER (IF AVAILABLE)

WARNING!

• Use under an adult surveillance.
• When in use make sure the rain cover does not come in contact with the face of the child as it may cause suffocation.
• Don’t use the raincover on the product without a hood that can hold it.
• Use only on the Inglesina stated product.
• Do not use on products other than those recommended by the Manufacturer.
• To avoid risk of suffocation or overheating do not use it on sun or in enclosed areas.
• Hand wash at 30° C.

WARRANTY CONDITIONS

• L’Inglesina Baby S.p.A. guarantees that every article has been designed and manufactured in compliance with the general product quality and safety standards/regulations in force in the European Union and the countries it is marketed in.

• L’Inglesina Baby S.p.A. guarantees that during and after the manufacturing process, every product has undergone various quality controls. L’Inglesina Baby S.p.A. guarantees that, at the time of purchase from the Authorised retailer, every product had no installation or manufacturing defects.

• This warranty does not invalidate the rights acknowledged to the consumer by the applicable national legislation, which may vary depending on the country in which the product was purchased and the provisions of which, in the event of a contrast, prevail over the contents of the warranty herein.

• In the event of material or manufacturing defects detected at the time of purchase or during normal use, as described in the relevant instruction manual, L’Inglesina Baby S.p.A.
  grants a consecutive 24-month warranty from the date of purchase.

• The warranty is only valid in the country where the product was purchased and if it was purchased from an Authorised Retailer.

• The warranty acknowledged is valid for the first owner of the product purchased.

• The warranty covers the replacement or repair free of charge of parts with factory defects. L’Inglesina Baby S.p.A. reserves the right to decide at its sole discretion whether to apply the warranty via the repair or the replacement of the product.

• To apply the warranty, the product serial number needs to be presented, along with a copy of the receipt issued at the time of purchase of the product, making sure that the date of purchase is indicated in a clearly legible form.

• This warranty will be automatically made null and void in the event that:
  – the product is used for purposes that are not expressly indicated in the relevant instruction manual.
  – the product is not used in compliance with the relevant instruction manual.
  – the product has been repaired by unauthorised and unaffiliated Customer Care centres.
  – the structural or textile part of the product has been modified and/or tampered with, without prior expressed authorisation by the manufacturer. Any modifications made to the products relieve L’Inglesina Baby S.p.A. from any liability.
  – the defect is due to negligent or careless use (e.g., violent shocks to the structural parts, exposure to aggressive chemical substances, etc.).
  – the product presents normal wear (e.g., wheels, moving parts, fabrics) due to prolonged and continuous use.
  – the product has been damaged, even accidentally, by the owner himself/herself or by third parties (for instance when it has been sent as luggage in air freight or using other means).
  – the product is sent to the retailer for assistance without the original receipt and/or without the serial number or when the date of purchase on the receipt and/or the serial number are not clearly legible.

• Any damage caused by the use of accessories not supplied and/or not approved by L’Inglesina Baby, shall not be covered by the warranty.

• L’Inglesina Baby S.p.A. shall not be held liable for any damage to property or injuries to persons resulting from the improper and/or misuse of the product.

• After the warranty period has expired, the Company guarantees customer care service for consideration for its products for a maximum period of four (4) years from the date said products were placed on the market; after this period, assistance interventions will be assessed case by case.

SPARE PARTS / AFTER SALES SERVICES

• Regularly inspect the safety devices to ensure the product’s  functionality over time. Do not use the product in the eventof any malfunction and/or anomaly. Promptly contact your Authorised Retailer or the Inglesina Customer Care service.
• Do not use spare parts or accessories not supplied and/or not approved by L’Inglesina Baby S.p.A.

WHAT TO DO IF YOU REQUIRE ASSISTANCE

• If you require assistance for your product, immediately contact the Inglesina Retailer that sold it to you, with the “Serial Number” relative to said object ready on hand.
• It is the Retailer’s duty to contact Inglesina to assess the best suited intervention case by case and then provide the subsequent indications.
• The Inglesina Customer Care Service can provide any information, following written request by filling out the form provided on the website: inglesina.com – Warranty and Assistance section.

HINTS FOR CLEANING AND MAINTAINING THE PRODUCT

• This product requires regular maintenance by the user.
• Never force any mechanisms or moving parts; in case of doubt, check the instruction first.
• Do not store the product if it is still wet and do not leave it in humid environments since mildew may form.
• Store the product in a dry place.
• Protect the product against weather agents, water, rain or snow; moreover, continuous and prolonged exposure tosunlight can cause changes in the colour of many materials.
• Should the product be used on the beach, carefully clean and dry it afterwards in order to remove sand and salt as they may cause rusting.
• Clean the plastic and metal parts with a damp cloth or with a mild detergent; do not use solvents, ammonia or benzine.
• Carefully dry metal parts after any contact with water toprevent the formation of rust.
• Keep all moving parts clean and, if necessary, lubricate them with light oil.

HINTS FOR CLEANING THE TEXTILE LINING

• Seat cover and harness are surface wash only. Clean with a damp cloth and mild soap; do not use solvents, ammonia or bleach.
  Do not use abrasive cleaners or scrubbing pads.

• Follow the lining washing instructions on the labels.

| Do not bleach
---|---
| Do not tumble dry
| Dry flat in shade
| Do not iron
| Do not dry clean
| Do not spin-dry

• Dry the textile lining completely before using or storing it.

INSTRUCTIONS

LIST OF COMPONENTS
fig. 1

“SELF STANDING” SUPPORT
fig. 2 In order to allow the stroller to remain upright on its own, pull out the support (S1) and place it in its housing.
STROLLER OPENING
fig. 3 To open the stroller, press the button (P1) and simultaneously the release button (P2) until the control device is released (P).
fig. 4 Holding the handle firmly on both sides, lift the stroller until the correct opening click is heard.
Warning: before use, make sure that the stroller is correctly opened by checking that the red area is no longer visible from both sides.
Warning: act on the operating device (P) only during the folding and unfolding activities on the stroller. Pay attention not to operate accidentally this device during normal use of the stroller.

REMOVING/ATTACHING THE FRONT WHEEL ASSEMBLY
In case of need, the front wheel assembly (D) can be easily removed.
fig. 5 To remove it, pull it out from the front support while holding down the lever (D1).
fig. 6 To reinstall it, simply position it and push it until it clicks into place.
fig. 7 Caution: make sure that the wheels are properly attached before use.

REMOVING/ATTACHING THE REAR WHEELS
Should it be necessary, the rear wheels (E) can easily be removed.
fig. 8 Use a screwdriver (or similar tool, not included) to operate the lever (E1) and simultaneously pull them out from the rear support.
fig. 9 To reinstall them, simply position them and push them until they click into place.
fig. 10 Caution: make sure that the wheels are properly attached before use.
REAR WHEELS BRAKE
fig. 11 To operate the brake, use the rear central lever (P3).
Always engage the brake during stops.
BLOCKING/UNBLOCKING THE FRONT WHEELS
fig. 12 The stroller features swivelling wheels that can be blocked or unblocked simply by operating the lever (P4) by the front wheel assemblies. HANDRAIL
fig. 13 The bumper bar (B) can be opened on one side or completely removed; to open it, pull the lever (B1) and remove it from its housing.
To remove it, repeat the operation on the other side as well.
Warning: never attach the bumper bar in the direction opposite the one shown.
ADJUSTING THE BACKREST
fig. 14 To lower the backrest, release the rear strap by pressing the button (P5) on the central device (P6).
fig. 15 To lift the backrest, press the button (P5) on the control device (P6) and simultaneously pull the rear ring (P7).
SAFETY BELTS
fig. 16 If the height of the back straps must be changed, remove the shoulder straps (P8) by detaching the velcro that secures them on the belts (P13), then pull them out of the loops on the backrest (P9). Use both back straps always at the same height.
fig. 17 Once the correct position has been found, re-insert the shoulder straps (P8) on the back straps, making sure that the velcro (P13) adheres correctly.
fig. 18 Make sure that the back strap is properly inserted in the ends of the waist one (P10).
fig. 19 Fasten the ends of the waist belt to the central buckle (P11).
fig. 20 Always use the crotch strap (P12) in combination with the waist strap, making sure that they are all well adjusted around the baby.
Caution! Failure to comply with this precaution can cause the baby to fall or slide out, with serious injury risks.
Caution: adapt the height and the length of the harness according to the baby’s growth.
HOOD
fig. 21 To adjust the hood, simply accompany it to the desired position.
fig. 22 The hood features a fabric insert that extends the degree of cover, improving protection from the sun.
HOOD VENTILATION
The back of the hood can be removed and completely folded down to allow for greater air circulation.
fig. 23 Detach the fixing velcro (A1) and wrap the hood back, locking it with the small central buckle (A2).

REMOVING THE HOOD
fig. 24 To remove the hood (A), detach the fixing velcros (A1).
fig. 25 Press the lever (A3) on the central joint (A4) and simultaneously remove the hood from the housings (A5) on the stroller.
fig. 26 Unbutton the two press studs (A6) on the central joints (A4).
fig. 27 Open the internal zip (A7) and free the lining from the fixed rear rib (A8).
The hood can now be removed completely from the stroller.
ADJUSTING THE FOOTREST
fig. 28 To lower the footrest (E), use both lower buttons (E1) and push it down simultaneously.
fig. 29 To lift the footrest, simply pull it upwards and it shall automatically lock into position.

CLOSING THE STROLLER
fig. 30 To fold the stroller, press the button (P1) and simultaneously the release button (P2) until the control device is released (P).
fig. 31 Then accompany the stroller downwards until it is completely folded.
Warning: act on the operating device (P) only during the folding and unfolding activities on the stroller. Pay attention not to operate accidentally this device during normal use of the stroller.
TRANSPORTATION HANDLE
fig. 32 To transport the closed stroller, use the proper handle (M).
Do not lift the stroller by holding it in another way.
RAIN COVER (IF AVAILABLE)
fig. 33 To fix the rain cover (D) to the stroller, after having correctly positioned it, fasten the velcro straps (D1) first around the side tubes and then around the front tubes.

REGISTER YOUR PRODUCT
Do it now, for your baby’s safety.
It is an easy and fast operation, just visit the website inglesina.com to do it.
To register the product is IMPORTANT because it provides us with the possibility to contact you for important information about safety and functionality of your product.

L’Inglesina Baby S.p.A.
Via Lago Maggiore, 22/26 – 36077 Altavilla Vicentina – Vicenza – Italy
Tel. +39 0444 392 200 – Fax +39 0444 392 250
inglesina.com – info@inglesina.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>