S1200-2 Guardrail TB For Fixed Ladders

“`html

Product Information

Specifications

• Product Name: SKB Guardrail TB for fixed ladders
• Compatible with guardrail systems: EN13374:2019
• Can be combined with side guards: S1200-2
• Minimum handrail height: 1100mm above finished surface

Installation Instructions

Step 1: Install Plastic Weight

Place the 25 kg plastic weight flush with the end of the
cantilever and secure using the 5.5 x 100 drill screw.

Step 2: Mount the Post

Mount the 1200 mm post in the sleeve of the cantilever rail
using the headless screw M8 x 12 mm and drill screw 6.3 x 25
mm.

Step 3: Insert Handrails and Knee Rails

Insert the handrails and knee rails through the 1200 mm posts.
Secure them using the provided screws (as shown in the
illustration).

Step 4: Secure Loose Screws

If screws come loose, reattach them as shown in the illustration
using the provided hardware.

General Safety Regulations

It is crucial to read and understand all safety instructions
before installing and using the anchor points. Always follow the
safety guidelines and ensure compliance with all
specifications.

Do not modify or supplement the products without explicit
written consent to ensure user safety and functionality. Use only
original parts from Sicherheitskonzepte Breuer GmbH for side
protection systems.

If there are any doubts about the safety of the side protection
systems, they should be withdrawn from use immediately. After any
incidents involving falls or impacts, have the system checked by a
competent person before further use.

Ensure that no other individuals are at risk of injury during
work, such as falling tools. Keep the work area clear of
obstructions.

FAQ (Frequently Asked Questions)

Q: Can this guardrail system be used with any type of

ladder?

A: The SKB Guardrail TB is specifically designed for fixed
ladders and should not be used with other types of ladders.

Q: What is the recommended height for the handrail above the

surface?

A: The handrail must always have a minimum height of 1100mm
above the finished roof surface or walking surface for safety
compliance.

“`

Instructions for use and Installation instructions
SKB Guardrail TB for fixed ladders

Chapter A – Product-specific information

General information
These guardrail feet are only to be used in conjunction with the following guardrail systems:

SKB Geländer Temporärer Seitenschutz Klasse A

EN13374:2019

Can be combined with the side guards: S1200-2

The inclination of the side guard is created by using the correspondingly inclined foot. It should be noted here that not all side protection systems can be used when realising the slope due to the reduction in the height of the handrail caused by the slope. The handrail must always have a minimum height of 1100mm above the finished roof surface or walking surface.

Overview of the components
TB – Ausleger

TB­ Counterweight

Post 1,20m

Overview of fastening & mounting materials

Bohrschraube 5,5 x 100

(930013) Bohrschraube 6,3 x 25

Madenschraube M8

Bohrschraube 6,3 x 38

(900016) (900016)

Dok. 1155 Ver. 1.0

A-1

2023-11-30

Installation instructions
TB guardrail for fixed ladders

Installaltion – Step 1
Place the plastic weight 25 kg flush with the end of the cantilever and install according to the following illustration.

Nr.

Descrip on

2 Can lever

4 Counterweight

8 Drill screw – 5,5 x 100

9 Washer 6,4­ DIN 125 – A

Dok. 1155 Ver. 1.0

A-2

2023-11-30

Installation – Step 2
Mount the post in the sleeve of the cantilever rail as shown in the illustration.

Nr.

Descrip on

1 Post 1200 mm

2 Can lever

10 Headless screw M8 x 12 mm

11 Drill screw 6,3 x 25 mm

Installation – Step 3
Insert the handrails and knee rails through the posts 1200 mm. Then screw through the holes in the posts into the hand and knee rails using the screws supplied (as shown in the illustration).

Dok. 1155 Ver. 1.0

Nr.

Descrip on

1 Post 1200 mm

5 Hand­ and Kneerail

12 Drill screw – 6,3 x 38 mm

A-3

2023-11-30

Installation – Step 4
If the screws come loose, fit them as shown in the illustration

Nr.

Descrip on

5 Hand­ and Kneerail

6 Fixed ladder connec on

7 Height levelling plate

11 Drill screw – 6,3 x 25 mm

13 Nut M8 DIN 985

14 Carriage bolt M8 x 30

15 Carriage bolt M8 x 50

Dok. 1155 Ver. 1.0

A-4

2023-11-30

Chapter B – General safety regulations
Allgemeine Hinweise
It is essential to read the safety instructions formulated in this brochure before installing and using anchor points. It is important that all points are clearly understood and that all specifications are observed.
If the products are sold abroad, the dealer is responsible for ensuring that all manufacturer’s documentation is supplied in the relevant national language.
All products may not be modified or supplemented without the explicit written consent of Sicherheitskonzepte Breuer GmbH, as this would endanger the functionality and thus the safety of the user.
Only original parts of the side protection systems from Sicherheitskonzepte Breuer GmbH may be used.
The side protection systems must be withdrawn from use immediately if there is any doubt about safe use.
After a person has fallen or an object has fallen against or into the side guard system and its accessories, the side guard system may only continue to be used if it has been checked by a competent person.
It must be ensured that no other persons can be injured by the work to be carried out, e.g. by falling tools. The area under the work area must be kept clear.
Legal requirements, such as accident prevention regulations, must be complied with.
Check before use
Before each use, the user must carry out an inspection of the equipment to ensure that it is in good working order and in a condition for use. The following criteria must be checked before use:
no signs of corrosion no loose connections and connectors no bending and deformation no optical defects complete and proper labelling no cracks no wear firm connection to the mounting surface all counterweights present or firm connection to the mounting surface
Use
All side protection systems serve exclusively to protect persons against falling from a height. The side guard systems must not be used for other purposes (e.g. for transporting materials or as a lifting device). In addition, the specified conditions of use must be observed.
There must also be a rescue plan in place prior to the start of use that takes into account all of the possible emergencies.
If there are any uncertainties during use or installation, contact the manufacturer.

Dok. 1155 Ver. 1.0

B-1

2023-12-04

Installation
It is essential to follow the enclosed installation instructions for all products.
Some health conditions (e.g. taking medication) may affect the user’s fitness in normal and emergency situations. If there is any uncertainty about the user’s health condition, consult a doctor.
The mounting substrates must be suitable for the respective side protection systems. The suitability of the substrate must be checked before installation. The requirements for the suitability of the substrate can be found in the corresponding installation instructions. If there is any uncertainty or doubt about the suitability of the mounting surface, the side protection systems must not be installed or used and a structural engineer must be consulted.
If individual products are assembled to form a system, the assembly instructions of Sicherheitskonzepte Breuer GmbH must also be observed here. Above all, it must be ensured that the individual elements of the system fit together. If anything is unclear, the manufacturer must be contacted. It must be noted that the safety of the user and the functionality of the entire system is at risk if a safe function of one of the elements or components of the system is impaired.
During installation and use of the railing system, the relevant accident prevention regulations must be observed.
During installation, make sure that the product marking can be read. If the product marking is no longer accessible after installation, another marking must be applied.
Stainless steel must not come into contact with grinding dust or steel tools, otherwise surface corrosion may occur. The railing systems must be installed in such a way that it is not possible to fall over the edge when in use.
An installation report must be prepared for the installation and the installation documentation must be kept for inspection. The installation report printed in this booklet can be used for this purpose or, alternatively, the Breuer Doku App.

Transport and storage
Transport and storage must be carried out in the original packaging of Sicherheitskonzepte Breuer GmbH. Storage should take place protected from the weather and in a dry place. Transport and storage must not cause any damage to the products.

Regular review
The railing systems should be subjected to a regular inspection by an expert trained and certified by Sicherheitskonzepte Breuer GmbH. The inspection must be carried out in exact compliance with the instructions of Sicherheitskonzepte Breuer GmbH. The regular inspection serves the safety of the user. The regular inspection serves the safety of the user. The periodic inspection must be carried out taking into account legal regulations, the type of product, the frequency of use and the relevant environmental conditions. It is recommended that the interval between two inspections should not exceed 12 months. During the inspection, the legibility of the product marking shall be checked. The regular inspection should be documented by an expert. The inspection documentation printed in this booklet can be used for this purpose or equivalent documentation can be prepared. The date of the last inspection should be documented on the side guard.

Maintenance and servicing
All repairs must be carried out by trained personnel according to the manufacturer’s specifications. If there is any uncertainty or doubt, contact the manufacturer.
The side guards are not subject to any special maintenance requirements. In case of soiling, the metal parts can be cleaned by simply wiping them after use. Other types of cleaning (chemical cleaning, etc.) are not permitted.

Dok. 1155 Ver. 1.0

B-2

2023-12-04

Control card

Sicherheitskonzepte Breuer GmbH Broekhuysener Straße 40 47638 Straelen

____ Product

____ Purchase date

Type description

Charge number

Standard

Location

Production year

Date of installation

Date

Reason for processing (regular inspection or repair)

Damage detected or Repairs carried out

Name and signature of the Expert

Next exam

Dok. 1155 Ver. 1.0

B-3

2023-12-04

NOTIZEN
SICHERHEITSKONZEPTE BREUER GMBH Broekhuysenerstrasse 40 · 47638 Straelen Tel.: +49 2834 462 96 60 · Fax: +49 2834 462 96 69
info @ sicherheitskonzepte-breuer.com www.sicherheitskonzepte-breuer.com

NOTIZEN
SICHERHEITSKONZEPTE BREUER GMBH Broekhuysenerstrasse 40 · 47638 Straelen Tel.: +49 2834 462 96 60 · Fax: +49 2834 462 96 69
info @ sicherheitskonzepte-breuer.com www.sicherheitskonzepte-breuer.com

NOTIZEN
SICHERHEITSKONZEPTE BREUER GMBH Broekhuysenerstrasse 40 · 47638 Straelen Tel.: +49 2834 462 96 60 · Fax: +49 2834 462 96 69
info @ sicherheitskonzepte-breuer.com www.sicherheitskonzepte-breuer.com

Broekhuysener Straße 40 47638 Straelen Tel: +49 (0) 2834 94 30 100 Fax: +49 (0) 2834 94 30 562 info@sicherheitskonzepte-breuer.com www .sicherheitskonzepte-breuer.com © Sicherheitskonzepte Breuer GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>