PREMIUM LEVELLA RTW100,RTW120-4 Countertop Refrigerator Display Case User Manual
- September 3, 2024
- PREMIUM LEVELLA
Table of Contents
- PREMIUM LEVELLA RTW100,RTW120-4 Countertop Refrigerator Display Case
- Product Usage Instructions
- General Information
- Parts of the refrigerator
- Handling and Installation
- Preparation and Power Supply
- Use and Caution
- Maintenance
- Troubleshooting
- Circuit Diagram
- Parameters
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PREMIUM LEVELLA RTW100,RTW120-4 Countertop Refrigerator Display Case
Specifications:
- Product Name: Countertop Refrigerator Display Case
- Model Numbers: PCRN357DR, PCRN427DR
- Compressor: Fully enclosed top brand compressor
- Refrigerant: R290 (environmentally friendly)
- Glass: Double hollow transparent glasses on door and body
- Power Supply: 110-120V, 60Hz single phase AC
Product Usage Instructions
Handling and Installation:
- Handle with care: Unplug the refrigerator before handling. Avoid tilting it over 45 degrees.
- Dry place: Install in a dry location.
- Sufficient space: Maintain at least 10cm distance from walls for proper air circulation.
- Ventilation: Ensure good ventilation. Wait 2 hours after installation before plugging in.
- Far from heat source: Avoid direct sunlight or heat sources.
- No heavy load: Do not place heavy objects on top of the refrigerator.
- Stable location: Install on a flat, stable surface to prevent noise or vibration.
Preparation and Power Supply:
- Power socket: Use an exclusive 110-120V, 60Hz single phase AC socket.
- Avoid sharing socket: Do not share the socketwith other appliances to prevent overheating.
- Protect cables: Avoid damaging the cable toprevent current leakage and fire hazards.
- Avoid water contact: Do not wash with running water to prevent electrical hazards.
- Away from flammable materials: Keep flammable or explosive materials away from the refrigerator.
- No sprays: Do not use flammable sprays near or inside the refrigerator.
- After power interruption: Wait at least 5 minutes after a power interruption before restarting the appliance.
FAQ:
Q: Can I use this countertop refrigerator display case for residential
purposes?
A: This refrigerator is designed for commercial locations and stores. It
is recommended for commercial use only.
Q: What refrigerant is used in this refrigerator?
A: The refrigerant used is R290, known for its environmentally friendly
properties.
Q: How should I clean the refrigerator?
A: Use a damp cloth with mild detergent to clean the exterior surfaces.
Avoid using water directly on the refrigerator to prevent electrical hazards.
COUNTERTOP REFRIGERATOR DISPLAY CASE
Operating Manual
Thank you for choosing and purchasing our product.
General Information
-
A top brand fully enclosed compressor is used on the desktop refrigerator. The refrigerant used, R290, is an environmentally friendly agent.
It features a rational configuration of refrigeration system with forced air cooling. The temperature is even inside the refrigerator. -
Double hollow transparent glasses are used on door and body. It features an elegant appearance, perfect visibility, and easy access.
-
This refrigerator has wide applications in commercial locations and stores.
Parts of the refrigerator
Handling and Installation
Handle with care
Unplug the wall socket first. Never tilt it over 45 degrees during handling.
Dry place
Always install the refrigerator in a dry place.
Sufficient space
The distance from both sides and back of the refrigerator to the wall or other
surfaces must be at least 10cm. The refrigeration capability might be
decreased if its surrounding space is too small to allow air circulation.
Ventilation
Always install the refrigerator at a place with good ventilation. When
installing the refrigerator for the first time, wait for 2 hours after
handling it, then plug the wall socket and start it.
Far from heat source
Never place the refrigerator directly under the sun. Never install it near any
heat source or heater to prevent a negative effect on the refrigeration
capability.
No heavy load
Never put any heavy load on top of the refrigerator.
No perforations
Never puncture the refrigerator. Never install any other appliance or
materials on top of the refrigerator.
Stable location
To avoid any unexpected noise and vibration, unpack, and install the
refrigerator on a flat and solid surface.
Preparation and Power Supply
Exclusive power socket
The power supply should be 110-120V, 60Hz single phase AC, with access to an
exclusive single phase three pin wall receptacle.
Do not share a socket!
Never let the refrigerator share a common socket with any other appliance. The
cable may become hot and cause a fire.
Protect cables
Never break or damage the cable. A damaged cable may cause current leakage and
fire.
Do not wash with water
Never wash the refrigerator surface with running water. Doing so may cause
current leakage or electrocution.
Keep away flammable and explosive materials
Never place any flammable or explosive materials inside the refrigerator, as
ether, gasoline, alcohol, adhesives or explosives. Never put dangerous
products n ear the refrigerator.
No sprays
Do not use or store flammable sprays as paint or coatings near or inside the
refrigerator, at they may cause a fire.
After a power interruption
After a power interruption or unplugging the refrigerator, always wail at
least 5 minutes before plugging the appliance or starting it again.
No medicine
Do not keep any medicines inside the refrigerator.
Use and Caution
Before use:
Plug the refrigerator in a 110-120V~ exclusive socket.
After the refrigerator is running, put your hand on the air outlet to verify
if it is cold enough. Then you may put food inside the refrigerator.
Digital Temperature controller
The digital temperature controller is an integrated intelligent controller
that controls the one HP compressor.
Its main functions are: Temperature Display/ Temperature Control/ Manual,
automatic defrost / Illumination Control/ Value Storing/ Parameter Locking
Front Panel Operation
-
To set temperature:
Press the “Set” button, the set temperature is displayed.
Press the or button to modify and store the displayed value.
Press the “Set” button to exit the adjustment mode and display the cold-room temperature. -
If no other button is pressed within 10 seconds, the cold-room temperature will be displayed.
-
Illumination: Press the button, it lights; Press it again, and it stops.
Manual start/stop defrosting: Press the button and hold it for 6 seconds to start defrosting or stop defrosting. -
The indicator light twinkles when the compressor stops working and the indicator light is on when the compressor is working.
-
Defrost LED: during defrosting, the LED is on; When it stops defrosting,the LED is off, During the delay display of defrosting, the LED flashes.
-
Digital controller reset:
When the display shows “Disorder”, press the “ ” button for 2 seconds until the buzzer rings, quickly press the “ ” button for 6 seconds until the buzzer rings again, the display will flash for 3 seconds, and the factory setting will be restored.
Cautions
- Keep the door opening times short and reduce the openings frequency to keep the cold temperature inside the refrigerator.
- Never block the air suction and outlet to keep good air circulation and refrigeration capability.
- Do not overfill the refrigerator, as it will impact its cooling capabilities. Adjust the rack height for proper food storage.
- Cool hot food down to room temperature before you put it into the refrigerator.
- Try to reduce the opening times to keep the refrigerator inside cold in case the power is cut off.
- Only professional technicians are allowed to repair any damaged power cable with special tools.
- Never touch the compressor to avoid burns.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not store explosive substances such as aerosol cans with flammable propellant in this appliance.
- During normal operation, the emission noise level does not exceed 70dB(A).
- The maximum loading of the shelf must not exceed 18 kg.
- The climatic class of the appliance is 4, the units are suggested to be used at 16’C-32’C (60.8″F-89.6″F) ambient temperature.
- To avoid damage or other problems, this product cannot be put or s tored with any corrosive food.
Maintenance
-
Notice
This refrigerator must be kept clean and periodical maintenance is necessary.
Always unplug the socket before performing any maintenance.
Never use a damaged plug, or loose socket to prevent electric shock or short circuit.
Never flush the refrigerator. Never use alkali detergent, soap, gasoline, acetone, or brush to clean it. -
Clean outside
Use a wet soft cloth with neutral detergent (tableware detergent) to clean the outside of the refrigerator and then wipe it with dry soft cloth. -
Clean inside
Take the rack out and clean it with water. -
Shut down the refrigerator for a long time
Take all food out and unplug the wall socket.
Clean both inside and outside of the refrigerator thoroughly and open the door to dry.
The glass may break easily. Keep the glass far from children. -
Lamp replacement in the light box
If the LED is damaged, it must be replaced by the manufacturer, or its service agent.
Troubleshooting
Trouble | Cause and Remedy |
---|
Not cooling
| Is the plug-in socket well connected? Is the fuse broken?
Is there no power?
Unsatisfactory refrigeration
| Is it under the sunshine? Is there any heat source nearby?
Is the surrounding ventilation bad? Does the door close well? Was the door open for a long time?
Is the door seal strip deformed or damaged? Is the refrigerator too full?
Does food block the air suction or outlet? Regulate the temperature controller.
Much noise
| The refrigerator is not level.
The refrigerator is in contact with the wall or other surfaces.
There is a loose part in refrigerator.
Contact local service agent for help if this simple trouble shooting does not solve the problems.
Note
The following are not problems:
The sound of flowing water is heard when the refrigerator is working. It is a
normal phenomenon as the coolant is circulating in the system.
In wet season, condensation might be found on the outside of the refrigerator.
It is not a problem; it is caused by high humidity. Simply use a dry cloth to
wipe it.
Circuit Diagram
Parameters
Notes
- The electric circuit diagram and parameters on the product name plate are final ones if they have been changed.
- The design might be improved without notice.
WARNING: Refrigerant used is R290, please protect against fire
Meaning of crossed out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
Contact your local government for information regarding the collection systems
available.
If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging
your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated
to take back your old appliance for disposal free of charge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>