ATOLL DAC BOARD DC200 Digital Inputs Board Instructions
- September 3, 2024
- ATOLL
Table of Contents
ATOLL DAC BOARD DC200 Digital Inputs Board
DIGITAL INPUTS
DIGITAL INPUTS BOARD FOR CD PLAYERS CD SIGNATURE
Enclosed:
- 1 digital input board.
- 1 plastic button.
- 3 screws.
- Unscrew the back cover.
- Get off the top cover (4 screws).
- Fix the ribbon flex of the digital board on the connector of the main board.
- Put the plastic cover and the card in the slot provided and screw it to the main chassis with the screws provided.
- Close the appliance.
Using: see CD Signature owner’s manual.
Careful: before any intervention, switch off your appliance and unplug all cables.
Specifications
- Compatibility: Digital Inputs Board for CD Players CD Signature
- Included in the package: 1 digital input board, 1 plastic button, 3 screws
Product Usage Instructions
Precautions:
Before beginning any installation or maintenance procedure:
- Switch off the appliance.
- Unplug all cables connected to the device.
Installation Steps:
- Unscrew the back cover of the device.
- Remove the top cover by unscrewing the four screws.
- Connect the ribbon flex of the digital input board to the main board’s connector.
- Place the plastic cover and the digital input board in the designated slot.
- Screw the digital input board to the main chassis using the provided screws.
- Securely close the appliance.
Usage: For detailed information on how to use the DAC BOARD DC200, please refer to the CD Signature owner’s manual.
FAQ
Q: Can I install the DAC BOARD DC200 on any CD player?
A: The DAC BOARD DC200 is specifically designed for CD Player’s CD
Signature. It is recommended to use it only with compatible devices.
Q: What should I do if the ribbon flex is damaged during installation?
A: If the ribbon flex is damaged, please contact our customer support for
assistance and replacement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>