SOLEM BL-NR Bluetooth Watering Controller User Guide
- September 3, 2024
- SOLEM
Table of Contents
SOLEM BL-NR Bluetooth Watering Controller
Product Information
Specifications
- Model: BL-NR
- Languages: English (EN), French (FR), Spanish (ES), Italian (IT)
Product Usage Instructions
Battery Installation
- Remove the green cover and the sealing cap.
- Place the battery in the compartment respecting the polarity.
- Replace the sealing plug and the green cap.
Configuration
- Turn on Bluetooth on your smartphone or tablet.
- Open the MySOLEM app and install a product for the first time:
- Launch the MySOLEM app.
- Tap on the number displayed in green (same as on the product).
- After a few seconds, your device will be connected.
- Change the name of the device if desired.
- Add a security key for protection.
To schedule, rename, or issue manual commands, open the MySOLEM app. Select the device by pressing either the number or its name, and then follow the application’s prompts. If pairing has already been established and you’re replacing the battery, there is no need to redo the pairing. Simply wait 2 minutes while the product pairs with your phone.
FAQ
- Q: Do I need to redo the pairing if I replace the battery?
- A: If pairing has already been established and you’re replacing the battery, there is no need to redo the pairing. Simply wait 2 minutes while the product pairs with your phone.
App download
- Download the MySOLEM app on your smartphone or tablet from the App Store or Google Play.
Battery installation
- Remove the green cover and the sealing cap.
- Place the battery in the compartment respecting the polarity.
- Replace the sealing plug and the green cap.
Configuration
-
Turn on Bluetooth on your smartphone or tablet.
If the Bluetooth is not turned on, the MySOLEM app will prompt you to activate it and it guide you to your settings in order to do so. -
Opening the app and installing a product for the first time:
- Tap on the number displayed in green. It is the same number found on the underside of the product.
- After a few seconds, your device will be connected.
To schedule, rename, or issue manual commands, open the MySOLEM app. Select
the device by pressing either the number or its name, and then follow the
application’s prompts. If pairing has already been established and you’re
replacing the battery, there is no need to redo the pairing. Simply wait 2
minutes while the product pairs with your phone.
For additional information, please visit our support website at
support.mysolem.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>