2Drumtek B20 TWS Wireless Earbuds User Guide
- August 31, 2024
- 2Drumtek
Table of Contents
B20 TWS Wireless Earbuds
“`html
Specifications:
- Model: B20
- Version: v5.2
- Charging Port: Type-C
- Earphones: Wireless
- Compatibility: Bluetooth-enabled devices
- Charging Time: 1.5 hours
Product Usage Instructions:
What’s in the Box:
- Earphones
- Charging Case
- Charging Cable (Type-C)
- User Manual
How to Wear:
Insert earphones into ears securely for a comfortable fit.
First Time Use:
- Remove the insulation sticker from the earphones.
- Place the earphones into the charging case and charge both
devices until fully charged before first-time use.
Power On & Connect:
Earphones automatically enter pairing mode when taken out of the
charging case. Each earphone can be used independently. Choose
‘2Drumtek B20’ to connect.
Reconnect & Disconnect:
To reconnect, take out the earphones and they will automatically
connect. Ensure Bluetooth on your phone is turned on.
Charging:
The earphones automatically charge when placed inside the
charging case. The indicator light will be solid red while charging
and turn off when fully charged.
Charge the Charging Case:
Connect the charging case using the Type-C cable. It takes
approximately 1.5 hours to fully charge.
Control at Your Fingertips:
Control functions like volume adjustment and accessing voice
assistants with taps on the earphones.
LED Instruction:
The LED indicator on the charging case flashes red, yellow, or
green slowly to indicate the charging status.
Frequently Asked Questions (FAQ):
Q: How do I know if the earphones are fully charged?
A: The indicator light on the charging case will turn off when
the earphones are fully charged.
Q: Can I use only one earphone at a time?
A: Yes, each earphone can be used independently, allowing you to
use just one if needed.
“`
B20
QUICK START GUIDE
v5.2
X
WHAT’S IN THE BOX
Earphones
Charging Case Charging Cable User Manual (Type-C)
HOW TO WEAR
FIRST TIME USE
Insulation Sticker
Remove the insulation sticker from earphones before the first time use. (Then
put the earphones into the charging case and start charging both devices until
fully charged before first time use.)
POWER ON & CONNECT
2Drumtek B20
ON
Automatically enter pairing mode once take out the earphones.
(L/R earphone can be used independently)
Choose “2Drumtek B20” to connect
RECONNECT & DISCONNECT
ON
To reconnect, take out the earphones and it will automatically be connected.
(Make sure the Bluetooth on your phone is turned on.)
CHARGING
Automatically charging once the earphones are inside the charging case. (The
indicator will be solid red after putting the earphones back into the charging
case, light off when fully charged.)
CHARGE THE CHARGING CASE
Type-C Connection
1.5H
CONTROL AT YOUR FINGERTIPS
Long Tab Volume –
Single Tap
/
Double Tap
L
R Triple Tap Enter Voice Assistant
cSiri, etc
Long Tab Volume +
Single Tap
/
Double Tap
Triple Tap Enter Voice Assistant cSiri, etc
(Long tap 2s to hang up phone call or decline an incoming call.)
LED INSTRUCTION
Charge the charging case with Type-C:
Flashes Red Slowly — Charging Flashes Yellow Slowly — Charging Flashes Green
Slowly — Charging
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>