pTron Basspods Mojo Wireless Earbuds User Guide
- August 31, 2024
- pTron
Table of Contents
- Basspods Mojo Wireless Earbuds
- Product Information
- Specifications:
- Charging Instructions:
- Earbuds Charging:
- Power On/Off:
- Smart Pairing and Bluetooth Connectivity:
- Control Functions:
- Mono (Single) Earbud Usage:
- Q: How can I adjust the volume on the pTron Basspods Mojo?
- Q: How do I activate Voice Assistance?
Basspods Mojo Wireless Earbuds
“`html
Product Information
Specifications:
- Product Name: pTron Basspods Mojo
- Default Volume Setting: 50%
- Charging Case Charging Time: 1 to 1.5 hours
- Power Source: 5V
- Bluetooth Connectivity: pTron TWS
Product Usage Instructions
Charging Instructions:
-
Connect the C-type USB cable to the charging case and a 5V
power source. -
Indicator LED light will blink red during charging.
-
Charging case takes approximately 1 to 1.5 hours to charge
fully.
Earbuds Charging:
- Place both earbuds in the charging case and close the cap for
automatic charging.
Power On/Off:
-
To Power On: Open the charging case or press the Touch
Sensitive Area (TSA) on both earbuds simultaneously for 3
seconds. -
To Power Off: Keep both earbuds in the charging case and close
the cap.
Smart Pairing and Bluetooth Connectivity:
-
Open charging case to turn on earbuds and wait for
pairing. -
Connect to Bluetooth by selecting pTron TWS on your phone.
-
Automatic reconnection to last paired device when powered
on.
Control Functions:
-
Call: To Answer, End, or Reject a call using TSA of
earbuds. -
Music: Play, Pause, Skip, or Repeat songs using TSA on
earbuds. -
Voice Assistant: Activate smart voice assistant by
tapping TSA four times.
Mono (Single) Earbud Usage:
-
Any earbud can be used in mono mode by following the pairing
steps. -
To switch to Stereo Mode, take out the other earbud from the
case.
Frequently Asked Questions (FAQ)
Q: How can I adjust the volume on the pTron Basspods Mojo?
A: You can adjust the volume either through the Earbuds or
through the connected device.
Q: How do I activate Voice Assistance?
A: Tap the TSA four times on either earbud to activate default
smart voice assistant. Ensure voice assistance is enabled in your
device settings.
“`
pTron Basspods Mojo
User Guide
Important: pTron Basspods Mojo’ is set at 50% default volume. You can increase the volume through the Earbuds or through the connected device.
Touch Sensitive Area (TSA)
Touch Sensitive Area (TSA)
TO CHARGE THE CHARGING CASE i. Connect the C-type USB cable to the charging
case and the USB end to a 5V power source. ii. Plug the USB connector of the
cable into a USB 5V/1A power source. iii. The indicator LED light will be
blink red while the charging case is getting charged. Depending on the power
delivered to the charging case, the charging case will take approximately 1 to
1.5 hour to completely charge. iv. The charging case indicator light will
constantly glow red.
CHARGING THE EARBUDS i. Place both the earbuds into the charging case properly
and close the charging case cap/lid. Earbuds will start
charging automatically.
POWER ON/OFF i. POWER ON: Simply open the charging case cap and take out the
earbuds from the charging case. The earbuds
will automatically turn on. OR
Press and hold the Touch Sensitive Area (TSA) on both L and R earbuds for 3
seconds simultaneously, then release when you hear the voice prompts, “POWER
ON”.
ii. POWER OFF: Keep both the earbuds in the charging case and close the
charging case cap properly.
SMART PAIRING AND BLUETOOTH CONNECTIVITY i. Open the charging case cap to turn
on the earbuds. ii. Take out the both earbuds from the charging case, Wait for
2-3 seconds until the left and right earbuds pair
with each other.
iii. Turn on the Bluetooth on your phone, and tap “pTron TWS” to connect. Both
earbuds will respond with a voice prompt: “pTron TWS is connected”.
iv. When the Bluetooth signal is lost, the earbuds will respond with a voice
prompt “DISCONNECTED” and will shut down automatically after 5 minutes.
v. When the earbuds power on, the earbuds will connect to the last paired
device automatically. If not, please repeat the above steps.
CONTROL FUNCTIONS
Call:To Answer A Call: Tap on the TSA of either earbud once. To End A Call:
Double tap on the TSA of either earbud . Both earbuds will respond with a
voice prompt. To Reject A Call: Double tap on the TSA of either earbud . Both
earbuds will respond with a voice prompt.
Music:To Play and Pause Music: Touch TSA on either earbud once. To Play the
next song: Touch TSA on the right earbud twice. To Play the Previous Song:
Touch TSA on Left earbud twice.
Voice Assistant: Four time-touch on either earbud TSA to activate default
smart voice assistant. The respective voice assistant screen pops up on the
connected device and you may place your command.
Tips: You may try out the following commands
What is the weather? Take a selfie.
Important: If Voice Assistance does not activate, the functionality must first
be enabled through your media device settings.
Mono (Single) Earbud Usage: i. Please note that any earbuds can be used in
mono mode. Take out any one earbud from the charging case and
close the charging case cap. ii. The selected earbud automatically enters
pairing (connecting) mode. iii. Turn on Bluetooth on your media device and
search for “pTron TWS” to connect.
Important: To switch to Stereo Mode (both earbuds), simply take out the other
earbud from the case. It will automatically
power on and pair with the previous selected earbud, hence enabling stereo
usage. You cannot use the below functions in mono (single earbud) mode: –
i. Next song or previous song function.
Troubleshooting: Scenario 1: One Earbud is Not Working a. Place both the
earbuds in the charging case and close the charging case cap. b. Take out both
the earbuds together from the charging case. c. Wait until L & R earbud pair
to each other. d. Turn ON the Bluetooth on your phone, search for “pTron TWS”
& connect.
Scenario 2: Earbuds Not Connecting/Scanning a. Place both the earbuds in the
charging case and close the charging case cap. b. Take out both the earbuds
together from the charging case. c. Restart your Bluetooth device or phone.
d. Now, search for ” pTron TWS” on your Bluetooth device & connect.
Scenario 3: Earbuds Disconnecting During a Phone Call 1. Charge earbuds 100%
before use. 2. Restart the earbuds and reconnect with your device.
Important: Please use this TWS within a 10-meter wireless range from the
connected device.
Safety Precautions Keep the device out of extreme heat and humidity. Play time
may vary depending on personal habits, Using incompatible USB cable or high
voltage chargers can damage the product & void the product warranty. We
strongly recommend using a good quality DC5V-1A chargers & the USB cable
included in the
package. Please don’t over-charge the product as it will decrease the service
life of battery. Read all warnings on the product and in the operating
instructions. It is recommended to utilize the product below the maximum
volume in order to protect hearing and extend
the ear-buds’ service life. Please don’t open/temper the product or product’s
battery. Please keep the product out of children’s reach. Stop using this
product immediately if it causes discomfort or pain. Dispose the product
responsibly and adhere to your local authority guidelines.
What is Covered in Warranty? Manufacturing defects in materials and
workmanship of the product ONLY. This warranty applies when the
product is used under normal conditions and the purpose for which the product
was designed. No warranty on product accessories such as silicone ear tips,
small charging USB cables. To avail warranty, Product Registration is
Mandatory at https://ptron.in/apps/product-registration Please read through
the complete warranty details at https://ptron.in/pages/repair-service-
warranty
Customer Care Details: Mail: support@ptron.in Tel: 040 – 67138888 Service
Centers List: https://ptron.in/pages/ptron-service-centers
Disclaimer: The color and specifications shown in or mentioned in the user
manual may differ from the actual product. Images shown are for representation
purposes only. Other product logos and company names mentioned herein may be
trademarks or trade names of their respective owners.