BLUESOUND N030 Node Nano Wireless Music Streamer Owner’s Manual

N030 Node Nano Wireless Music Streamer

“`html

Specifications

• Product: NODE NANO Wireless Music Streamer
• Model: N030
• High-performance HiFi streamer

Product Usage Instructions

1. Setup and Connection

Follow these steps to set up your NODE NANO:

1. Connect the power adapter to the NODE NANO and plug it into a
   power source.

2. Use the included Ethernet cable to connect the LAN port of the
   NODE NANO to your router, or connect via Wi-Fi.

3. Connect the audio output to your amplifier or speakers using
   the provided cables.

2. Presets Configuration

To configure presets:

1. Open the BluOS App on your device.
2. Access the Presets menu to program the preset buttons on the
   NODE NANO.

3. Audio Output Options

The NODE NANO offers multiple audio output options:

• AUDIO OUT: Connect to analog audio input using
  RCA connectors for internal DAC usage.

• COAX OUT: Connect to compatible devices using
  a coaxial cable to bypass the internal DAC.

• OPTICAL OUT: Use a digital optical cable to
  bypass the internal DAC for compatible devices.

4. USB Input and Trigger Out

The NODE NANO features USB input and trigger out options:

• USB INPUT (TYPE A): Connect USB mass storage
  devices for music playback.

• TRIGGER OUT: Use the 12V DC signal with a
  3.5mm mono audio cable to control external devices.

Frequently Asked Questions (FAQ)

Q: How can I reset the NODE NANO to factory settings?

A: To perform a factory reset, press and hold the reset button
on the NODE NANO for 10 seconds.

Q: What devices are compatible with the NODE NANO?

A: The NODE NANO is compatible with amplifiers, receivers,
stereo systems, active speakers, and various digital audio
processors.

Q: Can I use the NODE NANO with both Wi-Fi and Ethernet

connections simultaneously?

A: No, you can only use either Wi-Fi or Ethernet connection at a
time with the NODE NANO.

“`

NODE NANO
WIRELESS MUSIC STREAMER
OWNER’S MANUAL
v. N030

Welcome to Bluesound
Thank you for purchasing your NODE NANO. The NODE NANO is designed with a truly highperformance mindset, focusing on the absolute core functionality of a HiFi streamer.
BluOS
The BluOS multi-room music streaming platform, the world’s leading ecosystem for hi-res streaming audio, is the backbone of Bluesound product performance. The NODE NANO has music services built right in, so listening to your favorite artist or playlist is simple. Connect the NODE NANO to any audio system by using its class-leading analog RCA output or pass the digital signals along with Coax, Optical or USB. Using the BluOS Controller App, group your NODE NANO with other Bluesound players for a whole home listening experience, or simply let it do all the work itself to add hi-res streaming to your stereo. Either way, it’s easier than ever to enjoy the pleasures of hi-res listening ­ on any existing amplifier or powered speakers­ with the NODE NANO.
This Owner’s Manual will provide you with a more detailed overview of your NODE NANO and its features. It also includes some troubleshooting tips and tricks and networking best practices. The Quick Setup Guide included with your NODE NANO will help you get it on the network and ready to listen to your music.
Included Accessories

USB Power Adapter

Stereo RCA Connector

1

5

23

4

International Plug Adapter x4
USB-C Power Cable
2

Ethernet Cable

8

9

7

13

6

14

10 11

12

3

1 PRESETS The NODE NANO has 2 programmable preset buttons. These are configured using the Presets menu in the BluOS App.

2 STATUS INDICATOR Below is a table of the LED blink codes and their corresponding descriptions.

LED BLINK CODE Short blue flash, then red Solid green Flashing green White pulse Solid red Alternate flashing red and green Flashing blue Solid white Solid blue Flashing red Solid Purple

DESCRIPTION Powering up rebooting the unit Hotspot Mode Connecting to Network Software update available
Upgrade Mode Upgrading Mute Mode Indexing Connected to Network – ready to use with BluOS App Factory Reset in process Hotspot Mode timed out

3 PLAY/PAUSE BUTTON This button has multiple functions ­ a visual indicator of network connectivity and a PLAY/PAUSE button. For a full listing of LED Blink Codes, please see #2 ­ Status Indicator. For an ungrouped Player, press the button to Play or Pause the stream. If listening to an internet radio stream, the Pause- function will work for 30 seconds. At this point, the buffer is full and the stream will Stop. When a Player is grouped, pressing the PLAY/PAUSE button will Mute the Player while other Players continue the stream. The Player’s LED will flash blue when muted. This button is also used for Factory Rest functions. See steps for Factory Reset later in the manual.

4 IR RECEIVER The IR receiver is hidden behind the glass.

5 VOLUME Use the “-” and “+” buttons to adjust the volume level. Tapping the buttons will adjust the level by 1dB intervals.

6 AUDIO OUT Connect to the corresponding analog audio input of an amplifier, receiver, stereo system or active speakers. Connecting via the AUDIO OUT will use the NODE NANO’s internal DAC.

7 COAX OUT Using a coax cable (not provided), connect one end to the COAX OUT of the NODE NANO and the other end to the corresponding coax input of a compatible devices such as receivers, digital-to-analog converters or other digital processors. Connecting via the COAX OUT will bypass the NODE NANO’S internal DAC.

8 OPTICAL OUT Using a digital optical cable (not provided), connect one end to the OPTICAL OUT of the NODE NANO and the other end to the corresponding coax input of a compatible devices such as receivers, digital-to-analog converters or other digital processors. Connecting via the OPTICAL OUT will bypass the NODE NANO’S internal DAC.

9 LAN PORT The LAN PORT connection can be used with the Ethernet cable provided. This is an optional connection since the NODE NANO can be connected to the network through a Wi-Fi connection to your router. To setup the NODE NANO using the LAN Port a Wired Ethernet connection is required. Connect one end of the Ethernet cable to the LAN port of your wired Ethernet Broadband router and the other end to the NODE NANO’s LAN port.

10 USB INPUT (TYPE A) Connect a USB mass storage device to the USB input. Typical USB mass storage devices compatible with the NODE NANO include portable flash memory devices and external hard drives (FAT32 formatted). [Read about Server Mode in Settings]

11 USB OUTPUT (TYPE A) The NODE NANO can transfer digital audio (USB Audio 2.0) through to an external DAC via the USB Type-A slot. Using a USB cable (not provided), connect one end to the USB output of the NODE NANO and the other end to the corresponding USB input on a separate DAC device. Select your USB DAC from the NODE NANO’s Audio settings page in the BluOS App to bypass the NODE NANO’s internal DAC via USB audio out. Note: when USB Output is selected, all other outputs (Analog and Digital) are dormant.

4

12 TRIGGER OUT A 12V DC signal is available using the TRIGGER OUT. The 12V DC signal can be used to control or activate other external devices equipped with a corresponding 12V trigger input using a 3.5mm mono audio cable.
13 IR IN An infrared extender can be connected to allow for programmable learning remotes to control volume and source selection when a NODE NANO is stored in a way that the front panel IR sensor is not visible.
14 POWER Use the supplied USB-C cable and USB Power Adapter to power ON the NODE NANO.
NETWORK
The NODE NANO is a network audio player and relies on a well-implemented local area network to operate correctly. Internet access is required for software updates and to use many of the player’s features, like cloud-based music streaming. Visit the Bluesound Knowledge Base for more help, tips, and tricks to improve network setup. https://support.bluos.net/hc/en- us/sections/360000042348-Networking-101 Once the NODE NANO is connected to your equipment and AC power, you need to add it to your network. Watch for the front panel LED to turn Solid Green, indicating it is ready for network connection in Hotspot’ mode. You can add your player to the network via wired Ethernet, or wirelessly via Wi-Fi. If using Ethernet, simply plug in an Ethernet cable to the NODE NANO’s LAN Port. The LED will turn Solid Blue, indicating network connection. If using Wi-Fi, open the BluOS App on a phone or tablet, and use theAdd A Player’ wizard to guide you through the steps. Whether connecting via Ethernet or Wi-Fi, you must finalize setup by initializing your NODE NANO within the BluOS App.
MOUNTING
On the bottom panel of the NODE NANO there is a rubber cover hiding two keyhole slots. Simply remove the cover to reveal these slots. Use the cover as a guide for screw placement, by flipping it over and affixing it against the wall. Mounting screws are not included.
PRESETS
You can set presets for your favorite radio stations, music streams or playlists using the BluOS Controller app. Presets can be recalled from the two preset buttons on the NODE NANO or from an IR Remote, including the Bluesound RC1 remote (sold separately). Visit the Bluesound Knowledge Base for more help, tips, and tricks. How to add or delete a Preset? ­ The BluOS Support Crew
5

Audio Settings
TONE CONTROL: Enable to adjust your Player’s Treble and Bass output levels. Note: When enabled, the total volume of your Player is reduced by 6dB to allow adjustment of the bass and treble outputs from -6dB to 6dB. Tone Controls is disabled and not displayed when MQA external DAC is enabled.
REPLAY GAIN: Select any of the following to configure consistent volume levels between tracks in the play queue:
· Track gain ­ To use the track gain value from the song’s metadata to have the current track’s volume be more consistent with other tracks.
· Album gain ­ To use the album gain value from the metadata to provide a consistent volume level between all audio tracks on a particular album.
· Smart gain ­ To allow the BluOS to automatically choose between track gain and album gain values to provide the best replay gain option for your current listening.
Note: BluOS uses the metadata of the selected audio track to configure consistent volume levels between tracks.
OUTPUT MODE: Select any of the following to configure the channel output on the BluOS Player:
· Left/Right ­ Outputs only the Left or Right audio channel. · Mono ­ Outputs single-channel audio out. · Stereo ­ Outputs both Left and Right audio channels.
MQA EXTERNAL DAC: Enable this option when you require an MQA-certified external DAC to handle MQA unfolding rather than the BluOS Player.
Note: To enable MQA external DAC, you should enable the Output level fixed and disable ­ Tone Controls and Replay Gain. Learn more.
OUTPUT LEVEL FIXED: Enable to set and fix the volume of the BluOS Player at the maximum level. This allows you to control volume using the external device connected to the BluOS Player instead of the BluOS Controller App.
AUDIO CLOCK TRIM: Enable to reduce jitter and increase audio clock timing precision when using an external DAC. Note: Not all DACs can handle this. If audible clippings or dropouts occur, disable Audio Clock Trim to avoid BluOS’s accuracy setting from interfering with the external DAC’s firmware.

Settings

IR REMOTE: Setup an IR Remote, either by teaching your Bluesound Player to work with one of your old remotes or by using the Bluesound RC1 remote which works out-of-box.

· BluOS Remote: Enable/Disable the Bluesound RC1 Remote if you have multiple Bluesound Players in the same room, and only want the remote to control one of them. If you have multiple remotes, you can change the IR Channel for each Player. Learn more
· IR Learning: Program your own remote to work with your Bluesound Player. Learn more

Indicator Light: Adjust the brightness of the light on your Bluesound Player

·

Normal ­ Default brightness

·

Dim ­ Lower the brightness

·

Off ­ Turns off the light

BLUETOOTH: Settings for Bluetooth visibility and functionality. · Manual ­ This mode allows you to manually switch between Bluetooth as a local source in the Inputs section of the Music Tab. · Automatic ­ (Default mode) This mode automatically switches to the Bluetooth source when a Bluetooth-connected device
starts playing audio. · Guest ­ This mode switches the Bluesound player to the Bluetooth source when your connected Bluetooth device starts
playing audio. However, switching sources disconnects the Bluetooth connection. The Bluetooth source is not displayed under the Inputs section of the Music tab. This configuration is ideal for streaming audio from multiple Bluetooth-enabled devices. · Disabled ­ This mode turns off the Bluetooth receiver on the player.
SERVER MODE: To make your USB library accessible in the BluOS Controller app, plug the USB drive (in NTFS or FAT32 file format) into the USB port at the back of the BluOS Player and follow the onscreen prompts on the BluOS Controller app.
· [Yes] Server Mode enabled – USB drive is shared with other players on the network from the local Library. · [No] Server Mode disabled – USB drive access is restricted to the USB-connected Player.
Note: After the connection, the player’s Status Indicator LED turns white, indicating that it is indexing the connected library. Depending on the size of your music library, the indexing process may take some time to complete. The indexing process is complete when the Status Indicator LED returns to solid Blue.
Visit the Bluesound Knowledge Base for more help, tips, and tricks.
USB Server Mode – How to connect external USB Library to the BluOS Players? ­ The BluOS Support Crew

6

7

WARNING!

THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE- CREATE THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS NOT FUNCTIONING AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS OR CONCERNS CONTACT AN AUTHORISED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE PROCEEDING!

Steps to Factory Reset:

Disconnect the NODE NANO from electrical power.

Wait 30 seconds.

Reconnect the power.

Once the LED turns Red, press and hold the PLAY/PAUSE button. The LED will immediately

turn Green and then back to Red – continue to hold the button for 30 seconds.

After 30 seconds, the LED will begin to blink red ­ then release the button.

All customization to the NODE NANO will be removed and restored to factory settings.

IMPORTANT Removing your finger from the PLAY/PAUSE button at any time before the LED begins flashing red will cancel the factory reset and leave the NODE NANO in Upgrade Mode. Just start the steps again to factory reset it.

You will know the factory reset is successful if the NODE NANO returns to Hotspot mode (wireless connection – the LED will turn solid green). If it is connected to your network through a wired Ethernet connection, it will simply connect as if it was a new player (LED will turn solid blue).

© Bluesound International. Bluesound, the stylized wordmark “B” logotype, the phrase “HiFi for a wireless generation”, NODE NANO and all other Bluesound product names and taglines are trademarks or registered trademarks of Bluesound International, a division of Lenbrook Industries Limited. All other logos and services are trademarks or
service marks of their respective owners. 8

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>