PHILCO PSB 401 EW Cube Series Single Door Refrigerator Owner’s Manual
- August 30, 2024
- PHILCO
Table of Contents
- PSB 401 EW Cube Series Single Door Refrigerator
- Product Information
- Specifications
- Product Usage Instructions
- Part 1: Safety Information
- Part 2: Overview
- Part 3: Reverse Door
- Part 6: Helpful Hints and Tips
- Part 8: Troubleshooting
- Frequently Asked Questions (FAQ)
- Q: Can I use electrical appliances inside the food storage
- Q: How do I install an integrated ice maker?
- Q: What should I do if I suspect damage to the refrigerant
PSB 401 EW Cube Series Single Door Refrigerator
“`html
Product Information
Specifications
-
Model Numbers: PSB 401 EW Cube, PSB 401 EX Cube, PSB 401 EB
Cube -
Compliance: European Union directives for electrical
appliances -
Refrigerant: Isobutane (R600a)
-
Ice Maker: Available in select models
-
Power Supply: Standard electrical outlet
Product Usage Instructions
Part 1: Safety Information
It is crucial to follow all safety guidelines provided in the
user manual to ensure safe operation of the refrigerator. Some key
safety points include:
- Do not use the appliance if the supply cable is damaged.
- Avoid using mechanical devices for defrosting.
- Do not damage the refrigerant circuit.
- Avoid storing explosive substances inside the appliance.
Part 2: Overview
Familiarize yourself with the different compartments and
features of the refrigerator by referring to the user manual.
Understand the layout of shelves, drawers, and control panels.
Part 3: Reverse Door
If needed, follow the instructions provided in the manual to
reverse the door of the refrigerator to suit your kitchen layout or
preference.
Part 6: Helpful Hints and Tips
Learn about maintenance tips, energy-saving practices, and
optimal storage suggestions to make the most out of your
refrigerator.
Part 8: Troubleshooting
If you encounter any issues with the refrigerator, refer to the
troubleshooting section in the manual. It provides guidance on
common problems and solutions.
Frequently Asked Questions (FAQ)
Q: Can I use electrical appliances inside the food storage
compartments?
A: Only use electrical appliances recommended by the
manufacturer inside the food storage compartments to avoid any
hazards.
Q: How do I install an integrated ice maker?
A: Integrated ice makers should be installed by the manufacturer
or authorized servicing organizations to ensure proper functioning
and safety.
Q: What should I do if I suspect damage to the refrigerant
circuit?
A: If you suspect damage to the refrigerant circuit, avoid open
flames or ignition sources, and ventilate the room. Contact
authorized personnel for repair.
“`
REFRIGERATOR
OWNER’S MANUAL
PSB 401 EW Cube PSB 401 EX Cube PSB 401 EB Cube
Dear customer, Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all the instructions in this user’s manual.
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
CONTENTS
PART 1: SAFETY INFORMATION……………………………………………………………………………………………………….2
PART 2: OVERVIEW ……………………………………………………………………………………………………………………….10
PART 3: REVERSE DOOR ………………………………………………………………………………………………………………..11
PART 4: INSTALLATION………………………………………………………………………………………………………………….14 INSTALL
DOOR HANDLE……………………………………………………………………………………………………………………………………………14 SPACE
REQUIREMENT………………………………………………………………………………………………………………………………………………..14
LEVELLING THE UNIT …………………………………………………………………………………………………………………………………………………15
POSITIONING ………………………………………………………………………………………………………………………………………………………………15
LOCATION …………………………………………………………………………………………………………………………………………………………………….15
ELECTRICAL CONNECTION……………………………………………………………………………………………………………………………………….16
PART 5: DAILY USE ………………………………………………………………………………………………………………………..16 FIRST
USE……………………………………………………………………………………………………………………………………………………………………..16
TEMPERATURE SETTING ……………………………………………………………………………………………………………………………………………16
PART 6: HELPFUL HINTS AND TIPS…………………………………………………………………………………………………17
PART 7: CLEANING ………………………………………………………………………………………………………………………..18 ENERGY
SAVING TIPS …………………………………………………………………………………………………………………………………………………19 DAILY
USE…………………………………………………………………………………………………………………………………………………………………….19
PART 8: TROUBLE SHOOTING ………………………………………………………………………………………………………..20
PART 9: PRODUCT INFORMATION SHEET ………………………………………………………………………………………21
TECHNICAL INFORMATION ………………………………………………………………………………………………………………………………………23
TESTING INFORMATION…………………………………………………………………………………………………………………………………………….23
CUSTOMER CARE AND SERVICE………………………………………………………………………………………………………………………………23
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
MATERIALS ……..24 DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
………………………………………………………………….24
This appliance has been tested in accordance with the directives in force in the European Union. This appliance conforms to the relevant safety provisions for electrical appliances in force in the European Union.
Copyright © 2019, Fast CR, a. s.
EN – 1
Revision 04/2022
PART 1: SAFETY INFORMATION
FOR YOUR SAFETY AND CORRECT USAGE, BEFORE INSTALLING AND FIRST USING THE
APPLIANCE,READ THIS USER MANUAL CAREFULLY, INCLUDING ITS HINTS AND WARNINGS.
TO AVOID UNNECESSARY MISTAKES AND ACCIDENTS,IT IS IMPORTANT TO MAKE SURE THAT
ALL PEOPLE USING THE APPLIANCE ARE THOROUGHLY FAMILIAR WITH ITS OPERATION AND
SAFETY FEATURES. SAVE THESE INSTRUCTIONS AND BE SURE THAT THEY REMAIN WITH THE
APPLIANCE IF IT IS MOVED OR SOLD,SO THAT ANYONE USING IT THROUGHOUT ITS
LIFE,WILL BE PROPERLY INFORMED ON ITS USAGE AND SAFETY NOTICES. FOR THE SAFETY
OF LIFE AND PROPERTY,KEEP THE PRECAUTIONS OF THESE USER’S INSTRUCTIONS AS THE
MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY OMISSION.
THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND PERSONS
WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE
AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING
USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED.
CHILDREN AGED FROM 3 TO 8 YEARS ARE ALLOWED TO LOAD AND UNLOAD REFRIGERATING
APPLIANCES. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER
MAINTENANCE CANNOT BE PERFORMED BY CHILDREN WITHOUT SUPERVISION.
EN – 2
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
IF THE SUPPLY CABLE GETS DAMAGED, HAVE IT REPLACED BY A SPECIALIZED SERVICE
CENTER IN ORDER TO AVOID DANGEROUS SITUATIONS. IT IS PROHIBITED TO USE THE
APPLIANCE WHEN THE SUPPLY CABLE IS DAMAGED.
WARNING: DO NOT USE MECHANICAL DEVICES OR OTHER MEANS TO ACCELERATE THE
DEFROSTING PROCESS,OTHER THAN THOSE RECOMMENDED BY THE MANUFACTURER.
WARNING: DO NOT DAMAGE THE REFRIGERANT CIRCUIT.
WARNING: DO NOT USE ELECTRICAL APPLIANCES INSIDE THE FOOD STORAGE COMPARTMENTS
OF THE APPLIANCE,UNLESS THEY ARE OF THE TYPE RECOMMENDED BY THE MANUFACTURER.
WARNING: DO NOT STORE EXPLOSIVE SUBSTANCES SUCH AS AEROSOL CANS WITH A
FLAMMABLE PROPELLANT IN THIS APPLIANCE.
ISO 7000-1701 MARK (2004-01) LABELS MEDIA UNDER PRESSURE.
Copyright © 2019, Fast CR, a. s.
EN – 3
Revision 04/2022
THIS APPLIANCE IS INTENDED TO BE USED IN HOUSEHOLDS AND SIMILAR PREMISES, SUCH
AS: KITCHENETTES IN SHOPS, OFFICES AND OTHER WORKPLACES; APPLIANCES USED BY
GUESTS IN HOTELS, MOTELS, AND OTHER ACCOMMODATION FACILITIES; APPLIANCES USED
IN BED-ANDBREAKFAST FACILITIES; APPLIANCES USED IN CATERING AND OTHER SIMILAR
NON-VENDING ENVIRONMENTS.
ONLY SOME REFRIGERATOR MODELS ARE EQUIPPED WITH ICE MAKER. INTEGRATED ICE
MAKERS MUST BE INSTALLED BY THE MANUFACTURER OR ITS SERVICING ORGANIZATION
ONLY.
CAUTION: THE COOLING SYSTEM CONTAINS REFRIGERANT UNDER HIGH PRESSURE. DO NOT
MANIPULATE WITH THE SYSTEM. THE SYSTEM MAY BE REPAIRED BY AUTHORIZED PERSONS
ONLY.
EN – 4
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
WARNING : RISK OF FIRE / FLAMMABLE MATERIALS
CONTAINS COOLING GAS ISOBUTANE
R600a
REFRIGERANT THE REFRIGERANT ISOBUTENE (R600a IS CONTAINED WITHIN THE
REFRIGERANT CIRCUIT OF THE APPLIANCE,A NATURAL GAS WITH A HIGH LEVEL OF
ENVIRONMENTAL COMPATIBILITY,WHICH IS NEVERTHELESS FLAMMABLE. DURING
TRANSPORTATION AND INSTALLATION OF THE APPLIANCE,ENSURE THAT NONE OF THE
COMPONENTS OF THE REFRIGERANT CIRCUIT BECOMES DAMAGED. THE REFRIGERANT (R600a
IS FLAMMABLE. WARNING — REFRIGERATORS CONTAIN REFRIGERANT AND GASES IN THE
INSULATION. REFRIGERANT AND GASES MUST BE DISPOSED OF PROFESSIONALLY AS THEY
MAY CAUSE EYE INJURIES OR IGNITION. ENSURE THAT TUBING OF THE REFRIGERANT
CIRCUIT IS NOT DAMAGE PRIOR TO PROPER DISPOSAL.
THE SYMBOL
IS A WARNING AND INDICATES THE
REFRIGERANT AND INSULATION BLOWING GAS ARE FLAMMABLE.
Copyright © 2019, Fast CR, a. s.
EN – 5
Revision 04/2022
WARNING : RISK OF FIRE / FLAMMABLE MATERIALS IF THE REFRIGERANT CIRCUIT SHOULD
BE DAMAGED: – AVOID OPENING FLAMES AND SOURCES OF IGNITION. – THOROUGHLY
VENTILATE THE ROOM IN WHICH THE APPLIANCE IS SITUATED. IT IS DANGEROUS TO
ALTER THE SPECIFICATIONS OR MODIFY THIS PRODUCT IN ANY WAY. ANY DAMAGE TO THE
CORD MAY CAUSE A SHORT CIRCUIT, FIRE, AND/OR ELECTRIC SHOCK.
CAUTION: WHEN PLACING THE APPLIANCE IT MUST BE ENSURED THAT THE SUPPLY CORD
DOES NOT GET CAUGHT OR DAMAGED.
CAUTION: DO NOT PLACE PORTABLE MULTIPLE SOCKETOUTLETS OR PORTABLE EXTENSION
CABLES TO THE REAR SIDE OF THE APPLIANCE.
ELECTRICAL SAFETY 1. THE POWER CORD MUST NOT BE LENGTHENED. 2. MAKE SURE THAT
THE POWER PLUG IS NOT CRUSHED OR
DAMAGED. A CRUSHED OR DAMAGED POWER PLUG MAY OVERHEAT AND CAUSE A FIRE. 3.
MAKE SURE THAT YOU CAN ACCESS THE MAIN PLUG OF THE APPLIANCE. 4. DO NOT PULL
THE MAIN CABLE.
EN – 6
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
5. IF THE POWER PLUG SOCKET IS LOOSE, DO NOT INSERT THE POWER PLUG. THERE IS
A RISK OF ELECTRIC SHOCK OR FIRE.
6. YOU MUST NOT OPERATE THE APPLIANCE WITHOUT THE INTERIOR LIGHTING LAMP
COVER.
7. THE FRIDGE IS ONLY APPLIED WITH POWER SUPPLY OF SINGLE PHASE ALTERNATING
CURRENT OF 220~240V/50HZ. IF FLUCTUATION OF VOLTAGE IN THE DISTRICT OF USER IS
SO LARGE THAT THE VOLTAGE EXCEEDS THE ABOVE SCOPE,FOR SAFETY SAKE, BE SURE TO
APPLY A.C. AUTOMATIC VOLTAGE REGULATOR OF MORE THAN 350W TO THE FRIDGE.
THE FRIDGE MUST EMPLOY A SPECIAL POWER SOCKET INSTEAD OF COMMON ONE WITH OTHER
ELECTRIC APPLIANCES. ITS PLUG MUST MATCH THE SOCKET WITH GROUND WIRE.
DAILY USE DO NOT STORE EXPLOSIVE SUBSTANCES SUCH AS FLAMMABLE PROPELLANT
SPRAYS IN THIS APPLIANCE. DO NOT OPERATE ANY ELECTRICAL APPLIANCES IN THE
APPLIANCE (E.G. ELECTRIC ICE CREAM MAKERS,MIXERS ETC.). WHEN UNPLUGGING ALWAYS
PULL THE PLUG FROM THE MAINS SOCKET,DO NOT PULL ON THE CABLE. DO NOT PLACE HOT
ITEMS NEAR THE PLASTIC COMPONENTS OF THIS APPLIANCE. DO NOT PLACE FOOD
PRODUCTS DIRECTLY AGAINST THE AIR OUTLET ON THE REAR WALL. THE APPLIANCES
MANUFACTURES STORAGE RECOMMENDATIONS SHOULD BE STRICTLY ADHERED TO. REFER TO
RELEVANT INSTRUCTIONS FOR STORAGE.
Copyright © 2019, Fast CR, a. s.
EN – 7
Revision 04/2022
DO NOT PLACE SOFT OR SPARKLED BEVERAGES IN THE SPACE EVAPORATOR BECAUSE THEY
CREATE PRESSURE ON THE
CONTAINER, WHICH MAY EXPLOD, WHICH MAY DAMAGE THE
APPLIANCE.
DO NOT PLACE THE APPLIANCE IN DIRECT SUNLIGHT. KEEP BURNING CANDLES,LAMPS AND
OTHER ITEMS WITH NAKED FLAMES AWAY FROM THE APPLIANCE SO THAT DO NOT
SET THE APPLIANCE ON FIRE.
THE APPLIANCE IS INTENDED FOR KEEPING FOOD STUFF AND/ OR BEVERAGES IN NORMAL
HOUSEHOLD AS EXPLAINED IN THIS
INSTRUCTION BOOKLET. YOU SHOULD TAKE CARE WHEN MOVE
IT AS THE APPLIANCE IS HEAVY.
DO NOT REMOVE OR TOUCH ITEMS FROM THE FREEZER COMPARTMENT IF YOUR HANDS ARE
DAMP/WET, AS THIS COULD
CAUSE SKIN ABRASIONS OR FROST/FREEZER BURNS.
NEVER USE THE BASE,DRAWERS,DOORS ETC. TO STAND ON OR AS SUPPORTS.
FROZEN FOOD MUST NOT BE REFROZEN ONCE IT HAS BEEN THAWED OUT.
TO AVOID ITEMS FALLING AND CAUSING INJURY OR DAMAGE TO THE APPLIANCE,DO NOT
OVERLOAD THE DOOR RACKS OR
PUT TOO MUCH FOOD IN THE CRISPER DRAWERS.
EN – 8
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
INSTALLATION
IMPORTANT!
FOR ELECTRICAL CONNECTION CAREFULLY, FOLLOW THE INSTRUCTIONS GIVEN IN THIS
MANUAL. UNPACK THE APPLIANCE
AND CHECK IF THERE ARE DAMAGES ON IT.
DO NOT CONNECT THE APPLIANCE IF IT IS DAMAGED. REPORT POSSIBLE DAMAGES
IMMEDIATELY TO THE PLACE YOU BOUGHT
IT. IN THIS CASE RETAIN PACKING.
IT IS ADVISABLE TO WAIT AT LEAST FOUR HOURS BEFORE CONNECTING THE APPLIANCE TO
ALLOW THE OIL TO FLOW BACK
IN THE COMPRESSOR.
ADEQUATE AIR CIRCULATION SHOULD BE AROUND THE APPLIANCE, LACKING THIS LEADS TO
OVERHEATING. TO
ACHIEVE SUFFICIENT VENTILATION, FOLLOW THE INSTRUCTIONS
RELEVANT TO INSTALLATION.
WHEREVER POSSIBLE THE BACK OF THE PRODUCT SHOULD NOT BE TOO CLOSE TO A WALL TO
AVOID TOUCHING OR
CATCHING WARM PARTS (COMPRESSOR, CONDENSER) TO
PREVENT THE RISK OF A FIRE, FOLLOW THE INSTRUCTIONS
RELEVANT TO INSTALLATION.
THE APPLIANCE MUST NOT BE LOCATE CLOSE TO RADIATORS OR COOKERS.
MAKE SURE THAT THE MAINS PLUG IS ACCESSIBLE AFTER THE INSTALLATION OF THE
APPLIANCE.
PLACE ALL PACKAGING MATERIALS OUT OF THE REACH OF CHILDREN, THERE IS A RISK OF
SUFFOCATION.
Copyright © 2019, Fast CR, a. s.
EN – 9
Revision 04/2022
PART 2: OVERVIEW
Wire Shelves
Leveling Feet Thermostat
Rack Bars
NOTE! Above picturesfor reference only.
EN – 10
Copyright © 2019, Fast CR, a. s.
Rear Side
Revision 04/2022
PART 3: REVERSE DOOR
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal
spanner. · Ensure the unit is unplugged and empty. · To take the door off, it
is necessary to tilt the unit backwards. You should rest the unit on something
solid
so that it will not slip during the door reversing process. · All parts
removed must be saved to do the reinstallation of the door. · Do not lay the
unit flat as this may damage the coolant system. · It’ s better that 2 people
handle the unit during assembly.
1. Remove the top right hinge cover.
2. Undo the screws. Then remove the hinge bracket. unscrew
3. Remove the top left screw cover.
Copyright © 2019, Fast CR, a. s.
EN – 11
Revision 04/2022
4. Move the core cover from left side to right side. And then lift the upper door and place it on a padded surface to prevent it from scratching.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.
EN – 12
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
7. Place the door back on. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before finally tightening
the top hinge.
8. Insert the hinge bracket and screw it to the top of the unit. 9. Use a
spanner to tighten it if necessary.
10. Put the hinge cover and the screw cover back.
Copyright © 2019, Fast CR, a. s.
EN – 13
Revision 04/2022
PART 4: INSTALLATION
Install door handle
Space Requirement
· Keep enough space of door open. · Keep at least 50mm gap at two sides.
EN – 14
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
Levelling the unit
To do this adjust the two levelling feet at front of the unit. If the unit is
not level, the doors and magnetic seal alignments will not be covered
properly.
Positioning
Install this appliance at a location where the ambient temperature corresponds
to the climate class indicated on the rating plate of the appliance:
Climate class SN N ST T
Ambient temperature +10°C to +32°C +16°C to +32°C +16°C to +38°C +16°C to +43°C
Location
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best performance, if the appliance
is positioned below an overhanging wall unit, the minimum distance between the
top of the cabinet and the wall unit must be at least 100 mm. Ideally,
however, the appliance should not be positioned below overhanging wall units.
Accurate leveling is ensured by one or more adjustable feet at the base of the
cabinet.
Copyright © 2019, Fast CR, a. s.
EN – 15
Revision 04/2022
WARNING! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating
plate correspond to your domestic power supply. The appliance must be earthed.
The power supply cable plug is provided with a contact for this purpose. If
the domestic power supply socket is not earthed, connect the appliance to a
separate earth in compliance with current regulations, consulting a qualified
electrician. The manufacturer declines all responsibility if the above safety
precautions are not observed. This appliance complies with the E.E.C.
Directives.
PART 5: DAILY USE
First use
Cleaning the interior Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm water and some neutral
soap so as to remove the typical smell of a brand new product, then dry
thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the
finish.
Temperature Setting
· Plug on your appliance. The internal temperature is controlled by a
thermostat. There are 6 (8) settings. 1 is warmest setting and 5 (7) is
coldest setting and 0 is off.
· The appliance may not operate at the correct temperature if it is in a
particularly hot or if you open the door often.
EN – 16
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
Movable shelves All shelves are able to be moved to suitable positions.
Positioning the door shelves In order to storage food or beverage with
different size, the door shelves can be placed at different height. Follow
below process to adjust the shelves. · Step 1. pull the shelf to be free. ·
Step 2. Select suitable position and press the shelf to two convex plates
until it is totally blocked.
Vegetable Drawer The drawer is suitable for storing fruit and vegetables. It
can be pull out freely.
Thawing Deep-frozen or frozen food, prior to be used, can be thawed in a
fridge compartment or at room temperature. Place the frozen food in a dish or
bowl to avoid the flowing of condensate water when thaw it in compartment.
PART 6: HELPFUL HINTS AND TIPS
Hints for fresh food refrigeration To obtain the best performance: · do not
store warm food or evaporating liquids in the refrigerator · do cover or wrap
the food, particularly if it has a strong flavor · position food so that air
can circulate freely around it
Hints for refrigeration Useful hints: · Meat (all types): wrap in polythene
bags and place on the glass shelf above the vegetable drawer.For
safety, store in this way only one or two days at the most. · Cooked foods,
cold dishes, etc..: these should be covered and may be placed on any shelf. ·
Fruit and vegetables: these should be thorou-ghly cleaned and placed in the
vegetable draw-er. · Butter and cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible. · Milk bottles: these
should have a cap and should be stored in the bottle rack on the door.
Bananas, potatoes, onions and garlic, if not packed, must not be kept in the
refrigerator.
Copyright © 2019, Fast CR, a. s.
EN – 17
Revision 04/2022
PART 7: CLEANING
For hygienic reasons the appliance interior, including interior accessories,
should be cleaned regularly.
Caution! The appliance may not be connected to the mains during cleaning.
Danger of electrical shock! Before cleaning switch the appliance off and
remove the plug from the mains, or switch off or turn out the circuit breaker
or fuse. Never clean the appliance with a steam cleaner. Moisture could
accumulate in electrical components, danger of electrical shock! Hot vapors
can lead to the damage of plastic parts. The appliance must be dry before it
is placed back into service.
Important! Ethereal oils and organic solvents can attack plastic parts, e.g.
lemon juice or the juice form orange peel, butyric acid, cleanser that contain
acetic acid.
· Do not allow such substances to come into contact the appliance parts. · Do
not use any abrasive cleaners · Remove the food from the freezer. Store them
in a cool place, well covered. · Switch the appliance off and remove the plug
from the mains, or switch off or turn out the circuit breaker
of fuse. · Clean the appliance and the interior accessories with a cloth and
lukewarm water. After cleaning wipe with
fresh water and rub dry. · Accumulation of dust at the condenser increases
energy consumption. For this reason carefully clean the
condenser at the back of the appliance once a year with a soft brush or a
vacuum cleaner.1) · After everything is dry place appliance back into service.
- If the condenser is at back of appliance.
EN – 18
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
Energy Saving Tips
· The appliance should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of the direct sunlight.
· Let hot foods cool to room temperature before placing in the appliance.
Overloading the appliance forces the compressor to run longer.
· Be sure to wrap foods properly, and wipe containers dry before placing them
in the appliance. This cuts down on frost build-up inside the appliance.
· Appliance storage bin should not be lined with aluminum foil, wax paper, or
paper toweling. Liners interfere with cold air circulation, making the
appliance less efficient.
· Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon as
possible.
Daily use
To avoid contamination of food, please respect the following instructions ·
Opening the door for long periods can cause a signicant increase of the
temperature in the compartments
of the appliance. · Clean regularly surfaces that can come in contact with
food and accessible drainage systems. · Clean water tanks if they have not
been used for 48h; ush the water system connected to a water supply if
water has not been drawn for 5 days. · Store raw meat and sh in suitable
containers in the refrigerator, so that it is not in contact with or drip onto
other food. · Two-star frozen-food compartments(if they are presented in the
appliance) are suitable for storing pre-
frozen food, storing or making ice-cream and making ice cubes. · One-, two-
and three -star compartments (if they are presented in the appliance) are not
suitable for the
freezing of fresh food. · If the appliance is left empty for long periods,
switch o, defrost, clean, dry and leave the door open to
prevent mount developing within the appliance.
Copyright © 2019, Fast CR, a. s.
EN – 19
Revision 04/2022
PART 8: TROUBLE SHOOTING
If you experience a problem with your appliance or are concerned that the
appliance is not functioning correctly, you can carry out some easy checks
before calling for service,please see below.
Caution! Don’t try to repair the appliance yourself. If the problem persists
after you have made the checks mentioned below, contact a qualified
electrician, authorized service engineer or the shop where you purchased the
product.
Important! There are some sounds during normal use (compressor, refrigerant
circulation).
Problem Appliance does not work
The food is too warm. Appliance cools too much Unusual noises
Possible cause Temperature regulation knob is set at number “0”. Mains plug is
not plugged in or is loose Fuse has blown or is defective
Socket is defective
Temperature is not properly adjusted. Door was open for an extended period. A
large quantity of warm food was placed in the appliance within the last 24
hours. The appliance is near a heat source.
Temperature is set too cold.
Appliance is not level. The appliance is touching the wall or other objects. A
component, e.g. a pipe, on the rear of the appliance is touching another part
of the appliance or the wall.
Solution Set the knob at other number to switch on the appliance.
Insert mains plug.
Check fuse, replace if necessary. Mains malfunctions are to be corrected by an
electrician. Please look in the initial Temperature setting section. Open the
door only as long as necessary.
Turn the temperature regulation to a colder setting temporarily.
Please loo# in the installation location section. Turn the temperature
regulation knob to a warmer setting temporarily. Re-adjust the feet.
Move the appliance slightly.
If necessary, carefully bend the component out of the way.
If the malfunction shows again, contact the Service Center. These data are necessary to help you quickly and correctly. Write the necessary data here, refer to the rating plate.
EN – 20
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
PART 9: PRODUCT INFORMATION SHEET
Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2016
Supplier’s name or trademark: PHILCO
Supplier’s address: U Sanitasu 1621, ícany 251 01, CZ Model identifier: PSB 401 EW Cube / PSB 401 EX Cube / PSB 401 EB Cube
Type of refrigerating appliance: Small monoclimatic refigerator
Low-noise appliance:
No
Design type:
Wine storage appliance:
No
Other refrigerating appliance:
General product parameters:
Parameter
Value
Parameter
Overal dimensions (millimetre)
Height Width Depth
Energy efficiency Index (EEI)
510
440
Total volume (dm³ or l)
470
99
Energy efficiency class*
Airborne acoustical noise emissions (dB(A) re 1 pW)
Annual energy consumption (kWh/a)
39
Airborne acoustical noise emission class
79
Climate class:
Minimum ambient temperature (°C), for which the refrigerating appliance is suitable
Maximum ambient temperature (°C),
16
for which the refrigerating appliance
is suitable
Winter setting
No
Compartment Parameters:
Compartment parameters and values
Compartment type
Compartment volume (dm³ or l)
Recommended temperature setting for
optimised food storage (°C)
These settings shall not contradict
the storage conditions set out in Annex IV,
Table 3
Freezing capacity (kg/24h)
Pantry
No
–
–
–
Wine storage
No
–
–
–
Cellar
No
–
–
–
Fresh food
Yes
41
4
–
Chill
No
–
–
–
freestanding Yes Value 41 E C N/ST 38
Defrosting type (auto-defrost=A,
manual defrost=M)
M –
Copyright © 2019, Fast CR, a. s.
EN – 21
Revision 04/2022
0-star or icemaking
No
–
–
–
–
1-star
No
–
–
–
–
2-star
No
–
–
–
–
3-star
No
–
–
–
–
4-star
No
–
–
–
–
2-star section
No
–
–
–
–
Variable
temperature
–
–
–
–
–
compartment
Light source parameters:
Type of light source
–
Energy efficiency class
–
Minimum duration of the guarantee offered by the manufacturer: 24 months
Additional information:
Weblink to the manufacturer’s website, where the information in point4(a)
Annex of Commission Regulation (EU) 2019/2019 is found: www.philco.cz
- A (highest efficiency) to G (lowest efficiency)
EN – 22
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
TECHNICAL INFORMATION
Technical information can be found on the type plate on the inside of the
appliance and on the energy label. The QR code, on the supplied energy label,
contains a link to register the appliance in the EU Eprel database. Keep the
energy label, the instructions for use, together with other documents supplied
with the device.
TESTING INFORMATION
The delivered device is in accordance with EcoDesign and EN62552_2019/2019_B.
Air access requirements for proper operation of the device, the minimum
distance from the wall and the dimensions of the device are part of this
manual. If you have any further questions, please contact the manufacturer.
CUSTOMER CARE AND SERVICE
Always use original spare parts. Model name and serial number can be found on
the rating plate. Position of rating plate can be changed without notice. The
original spare parts for some specific components are available for a minimum
of 7 or 10 years, based on the type of component, from the placing on the
market of the last unit of the model. When contacting our authorized service,
have the model designation, serial number and defect description available.
To download documents, visit www.philco.cz.
To report a defect and obtain additional service information, visit
https://philco.cz/podpora-a-servis.
Subject to change without notice.
Copyright © 2019, Fast CR, a. s.
EN – 23
Revision 04/2022
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
MATERIALS
Dispose of packaging material at a public waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
The meaning of the symbol on the product, its accessory or packaging indicates
that this product shall not be treated as household waste. Please, dispose of
this product at your applicable collection point for the recycling of
electrical & electronic equipment waste. Alternatively in some states of the
European Union or other European states you may return your products to your
local retailer when buying an equivalent new product. The correct disposal of
this product will help save valuable natural resources and help in preventing
the potential negative impact on the environment and human health, which could
be caused as a result of improper liquidation of waste. Please ask your local
authorities or the nearest waste collection centre for further details. The
improper disposal of this type of waste may fall subject to national
regulations for fi nes.
For business entities in the European Union If you wish to dispose of an
electrical or electronic device, request the necessary information from your
seller or supplier.
Disposal in other countries outside the European Union If you wish to dispose
of this product, request the necessary information about the correct disposal
method from local government departments or from your seller.
This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design and technical specifications may occur without
prior notice and we reserve the right to make these changes.
Original of this user manual is in czech language.
EN – 24
Copyright © 2019, Fast CR, a. s.
Revision 04/2022
NOTES/POZNÁMKY/NOTATKI/MEGJEGYZÉS
Výrobce/Manufacturer: Fast CR, a.s. U Sanitasu 1621 ícany 251 01, CZECH REPUBLIC Distributor: FAST PLUS, a.s., Vlcie hrdlo 324/90 821 07 Bratislava, SLOVAKIA Distributor: FAST POLAND Sp. z o. o. Kwietniowa 36 05-090 Wypdy, POLAND Distributor: FAST HUNGARY Kft. H-2310 Szigetszentmiklós Kántor utca 10, HUNGARY
is a pending or registered trademark of Electrolux Home
Products, Inc. and used under a license from ElectroElNu-x1
Home Products, Inc. Copyright © 2019, Fast CR, a. s.
Revision 02/2021
References
- Automatické pračky, chladničky, myčky, vestavné spotřebiče | Philco
- Servis - OnLine hlášení reklamace | Philco
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>