CHRISTOPEIT 2425 Walking Pad Instruction Manual

CHRISTOPEIT 2425 Walking Pad I

FAQs

Q: How often should I lubricate the Walking Pad?

A: The lubrication frequency depends on your weekly usage. For less than 3 hours per week, lubricate once a year. For 3-4 hours per week, lubricate every six months. For more than 5 hours per week, lubricate every three months.

DEAR CUSTOMER

we congratulate you on your purchase of this home training sports unit and hope that we will have a great deal of pleasure with it. Please take heed of the enclosed notes and instructions and follow them closely concerning assembly and use. Please do not hesitate to contact us at any time if you should have any questions.

Attention! Before use read operating instructions!

IMPORTANT RECOMMENDATIONS AND SAFETY INSTRUCTIONS

Our products are all TÜV tested and therefore represent the highest current safety standards. However, this fact does not make it unnecessary to observe the following principles strictly.

1. Assemble the machine exactly as described in the installation instructions and use only the enclosed, specific parts of the machine contained in the assembly. Before assembling, verify the completeness of the delivery against the delivery notice and the completeness of the carton against the installation and operating instructions.
2.  Check the firm seating off all screws, nuts, and other connections before using the machine for the first time and at regular intervals (every 1-2 months) to ensure that the trainer is in a safe condition. Replace defective components immediately and/or\ keep the equipment out of use until repair.
3. Set up the machine in a dry, level place and protect it from moisture and water. Uneven parts of the floor must be compensated by suitable measures and by the provided adjustable part of the machine if such is installed. Ensure that no contact occurs with moisture or water.
4. Place a suitable base (e.g. rubber mat, wooden board, etc.) beneath the machine if the area of the machine must be specially protected against indentations, dirt, etc.
5. Leave at least 0.6 meters of free space around the treadmill at the installation site and at least 2 meters to other objects such as furniture or walls.
6. Do not use aggressive cleaning agents to clean the machine and employ only the supplied tools or suitable tools of your own to assemble the machine and for any necessary repairs. Remove drops of sweat from the machine immediately after finishing training.
7. Attention! Systems of heart frequency supervision can be inexact. Excessive training can lead to serious health damage or death. Consult a doctor before beginning a planned training program. He can define the maximum exertion (pulse, Watts, duration of training, etc.) to which you may expose yourself and can give you precise information on the correct posture during training, the targets of your training, and your diet. Never train after eating large meals.
8.  Only train the machine when it is in the correct working order. Use original spare parts only for any necessary repairs. Attention! Replace the worm parts immediately and keep this equipment out of use until repaired.
9. When setting the adjustable parts, observe the correct position and the marked, maximum setting positions and ensure that the newly adjusted position is correctly secured. Please remove the tools you need to adjust after adjusting a new position.
10. Unless otherwise described in the instructions, the machine must only be used for training by one person at a time. The exercise time should not overtake 45 min./daily.
11. . Wear training clothes and shoes that are suitable for fitness training with the machine. Your clothes must be such that they cannot catch during training due to their shape (e.g. length). Your training shoes should be appropriate for the trainer, must support your feet firmly, and must have non-slip soles.
12. Attention! If you notice a feeling of dizziness, sickness, chest pain, or other abnormal symptoms, stop training and consult a doctor.
13. Never forget that sports machines are not toys. They must therefore only be used according to their purpose and by suitably informed and instructed persons.
14. People such as children, invalids, and handicapped persons should only use the machine in the presence of another person who can give aid and advice. Take suitable measures to ensure that children never use the machine without supervision.
15. Ensure that the person conducting training and other people never move or hold any parts of their body in the vicinity of moving parts.
16. At the end of its life span, this product is not allowed to be disposed of as normal household waste, but it must be given to an assembly point for the recycling of electric and electronic components. You may find the symbol on the product, on the instructions or on the packing. The materials are reusable in accordance with their marking. With the re-use, the material utilization or the protection of our environment. Please ask the local administration for the responsible disposal place.
17. To protect the environment, do not dispose of the packaging materials, used batteries, or parts of the machine as household waste. Put these in the appropriate collection bins or bring them to a suitable collection point.
18. The maximum permissible load (=body weight) is specified as 120 kg. Evaluate your body weight before you start the exercise.
19. If the power cord of this item is damaged, this must be replaced by the manufacturer or the customer service or with an electrically certified person.
20. Do not leave the product switched on or in operation unattended and secure unintentional use by unplugging the power plug.
21. The assembly and operating instructions are part of the product to look at. If the product is sold or passed on, this documentation must be included.

UNPACK AND OPERATION

Before usage, observe our recommendations and safety instructions.

UNPACK

1. Remove small parts, and loose packing material from the box and then take out with the help of a second person the reassembled frame of packaging.

CHECKS AND HOW TO START

1. When everything is in order, connect the power supply cable (25) with wall power (220-240V~50-60Hz) and the socket on the main switch (39) below the front frame.
2. The computer will show normal manual mode. Carefully remove the protective film from the display. Insert the battery into the remote control (5), respecting the polarity, or pull out the plastic battery separator. Press the [ ] button and after a 3 sec. Count Down the treadmill (39) and start moving.
3. Start walking onto the walking surface (39) when the speed is slow and follow the speed. Familiarize yourself with the machine at low-speed settings. Walk in the middle of the running surface (39). Don’t step on the side foot rails (13+16). Only walk with look at the computer (8) on the walking pad during the walk. In emergency cases, step of the walking pad lateral.
   Note: Please keep the toolset and the instructions in a safe place as these may be required for repairs or spare parts orders becoming necessary later.

TRANSPORT AND STORAGE

1. Turn off the walking pad and disconnect the power cord.
2. Lift the walking pad at the rear end until it stands on the front transport rollers (30). So you can easily move it.
3.  Choose a dry indoor storage location. You can store the walking pad lying down or leaning against the wall in an upright position on the stand-up foot (3). Cover the device to protect it from discoloration from possible sunlight and dust.

MAINTENANCE AND ADJUSTING

Lubrication

To ensure that the treadmill runs light and well over the long term, the backside of the running surface should always checked for lubricity and, if necessary, treated with silicone oil (no lubricant based on oil or petroleum). When using less than 3 hours/week, we recommend lubricating once a year, when using 3-4 hours/week, every six months, and when using more than 5 hours/week, lubricate every three months. The lubrication takes place by putting silicone oil into the maintenance opening. To do this, start the treadmill at a slow speed, remove the rubber plug (52), and dribble some silicone oil (approx. 5ml) into the opening. (Caution! Too much lubricant may cause the tread to slip.)

Adjusting running belt
You need to adjust the walking belt to the normal position, per the following steps if it is off. Set speed at 3-5km. Use the Allen key to adjust the belt tension bolt on the end cap of the system frame.

1. If you want to move the belt towards the left, turn the right tension bolt clockwise.
2. If you want to move the belt towards the right, turn the left tension bolt clockwise.

If you have already done according to the steps above and it is still not at the good range, then the running belt should be damaged already, please contact your local dealer for replacement.
Note: Make sure that the running surface is as centered as possible. Once these move too far from the center, (about 10 mm) they should be readjusted into the center.

Running belt slips

• a. The running surface is not properly tensioned. Slightly tight-en both screws on the end caps.
• b. Make sure the motor belt is not too loose.
• c. Remove excess lubricant with a cloth.

No light on the Display

• Check whether the plug is in the socket and whether the outlet has power.
• Check that the main switch on the base frame is switched on and that the safety clip is correctly attached to the computer. Attention! Always pull out the mains plug when checking the computer plug connections.

Overload protection

The fuse compartment (A) is located between the main switch and the mains connection socket for the main connection (22). There is a micro fuse 6,3x20mm with the data 5A/250V.

Abnormal noise from the machine:

• Check if any screw of a machine is loose.
• Check if the motor belt is off.
• Check if the running belt is off.

Note: Please contact your local dealer if you have checked all the above listed things but the problem is still there.

Cleaning

Use only a less wet cloth for cleaning. Caution: Never use benzene, thinner, or other aggressive cleaning agents for surface cleaning as this damage is caused. The device is only for private home use and for use suitable indoors. Keep the unit clean and moisture from the device.

COMPUTER MANUAL

DISPLAYS

[TIME] Display: Shows actually time of exercise distance in Km.
[CAL./PULSE] Display: Shows the approx. kilocalories consumed in kcal or the pung in minutes and seconds.

[SPEED] Display: Shows actually speed in km/h during exercise mode. Shows programs P01-P06 in stop mode.

[DISTANCE] Display: Shows alse if a Bluetooth heart rate belt was worn to measure the pulse.

KEYS:

• [P] Key: press this key to select exercising speed programs P01-P6
• [Start] Key: Press this key to start the exercise program. The running surface starts delayed by 3 seconds.
• [Stop/Pause] Key: Press this key during exercise to interrupt the program (motor stops running). You can press the [Start] key to continue this exercise program or press the [Stop/Pause] key again to finish this program. Prevalues can be set to zero by pressing the [Stop/Pause] key.
• [+] Key: Press this key to increase settings or motor speed.
• [-] Key: Press this key to decrease settings or motor speed.
• [M] Key: Press this key to select the time distance or calories in the manual program.

STARTUP

The walkingpad can only controlled with the supplied remote control. The remote control requires a button cell type CR2032. Insert the battery into the remote control (5), respecting the polarity, or pull out the plastic battery separator. The range is approx.1.5m. If the remote control does not respond, first change the battery.

PROGRAMS Manual Program

1. Connect the power cable (25) to the treadmill and to a properly installed socket (230V~50Hz) and turn on the power switch (22) at the bottom front of the basic device. The computer will show you the manual program and is ready to start.
2. Stand on the sidebars.
3. Press the [ ] key to start exercising. After a 3 sec. count down, the motor begins to run slowly and you can step on the running belt and follow the speed.
4.  Adjust the speed with the [+] and [-] keys to the desired speed.

Time- Program:

On the normal manual mode, press the [M] key, to enter the time pro-gram. The time display will flash and the initial value is 30:00. Press the [+] or [-] keys to set the value. The range is 5:00-99:00. Press the [ ] key to start the program. If set a value the display counts up to zero and then stops running the motor.

Distance- Program:

On the normal manual mode, press the [M] key, to enter the distance program. The distance display will flash and the initial value is 1,00KM. Press the [+] or [-] keys to set the value. The range is 0,5-65:0 KM. Press the [ ] key to start the program. If set a value the display counts up to zero and then stops running the motor.

Calories- Program:

On the normal manual mode, press [M] key, to enter calories pro-gram. The calories display will flash and the initial value is 50kcal. Press the [+] or [-] key to set the value. The range is: 10-995kcal. Press the [ ] key to start the program. If set a value the display counts up to zero and then stops running the motor.

RANGE OF ALL FUNCTIONS

EXERCISE PROGRAMS P01-P06

On the normal manual mode, press the [P] key to choose one of the 6 exercise speed programs. Each program is divided into 20 intervals of time and the speed changes as the following program list shows. The initial setting time is 30min, set a time for a training session and press the [ ] key to start the program. If the program runs till end of time the motor will stop running after the display counts down the time to zero. Pressing [ ] key to finish earlier the program.

CONNECTIVITY

HEART RATE MEASUREMENT

Heart rate measurement using a heart rate belt:
For reliable heart rate monitoring during training, we recommend wearing a suitable chest belt. The computer has a built-in receiver, so you can use a Bluetooth heart rate belt, such as the Christopeit Sport BT heart rate belt (item no.: 2209). If you moisten the heart rate belt a little before you put it on, the computer should record and display the heart rate data within 60 seconds. The range of the heart rate belts is approx.10 m depending on the model.
Attention! Heart rate monitoring systems may be inaccurate. Excessive exercise can cause serious injury or death. If you feel dizzy or weak, stop training immediately. The pulse values are not suitable for medical purposes.

TRAINING SPACE REQUIREMENT

Training area in mm (for home trainer and user)

Free area in mm (Training area and security area (circulating 600mm)

KINOMAP APP

Sport, coaching, gaming, and eSport are the keywords of the Kinomap app. This contains many kilometers of real film material to exercise inside as if you were outside; Tracking routes and analysis of your performance; Coaching content; Multiplayer mode; new posts daily; Official indoor races and more …

Download the app and connect

Scan the adjacent QR code with your smartphone/tablet or use the search function at the Playstore (Android) or APP Store (IOS) to download the Kinomap APP. Register and follow the instructions in the APP. Activate Bluetooth on the smartphone or tablet and select the device manager in the app and then the appro-priate product category there. Then select your type designation using the manufacturer logo “Christopeit Sport” to connect the sports equipment. Depending on the sports equipment, different functions are recorded by the APP via Bluetooth, or data is exchanged.
Attention! The Kinomap app offers a free trial version for 14 days. You can then decide whether you want to continue training for free with the basic version or use the full range of the Kinomap app for a fee.
Current information and fees can be found at: www.kinomap.com

OTHER APPS
Fithome (Android and iOS app)
Zwift (Android and iOS app)
Use the search function on the Playstore (Android) or APP Store (iOS) to download the respective app or get more information.

GENERAL TRAINING INSTRUCTIONS

You must consider the following factors in determining the amount of training effort required in order to attain tangible physical and health benefits.

INTENSITY

The level of physical exertion during training must exceed the point of normal exertion, without going beyond the point of breathlessness and/or exhaustion. A suitable reference value can be the pulse. With each training session, the condition increases and therefore the training requirements should be adjusted. This is possible by extending the duration of the training, increasing the level of difficulty or changing the type of training.

TRAINING HEART RATE

To determine the training heart rate, you can proceed as follows. Please note that these are guide values. If you have health problems or are unsure, consult a doctor or fitness trainer.

Maximum heart rate calculation

The maximum pulse value can be determined in many different ways, since the maximum pulse depends on many factors. You can use the main formula for the calculation (maximum heart rate = 220 – age). This formula is very general. It is used in many home sport products to determine the maximum heart rate. We recommend the Sally-Edwards-formula. This formula calculates the maximum heart rate more precisely and takes gender, age and body weight into account.

Sally-Edwards-formula:

• Men:

• Maximum heart rate = 214 – (0.5 x age) – (0.11 x body weight)
  Women:

• Maximum heart rate = 210 – (0.5 x age) – (0.11 x body weight)

Training heart rate calculation

The optimal training heart rate is determined by the goal of the training. Training zones were defined for this.

• Health – Zone: Regeneration and Compensation

• Suitable for: Beginners

• Type of training: very light cardio training Goal: recovery and health promotion. Building the basic condition.

• Training heart rate = 50 to 60% of the maximum heart rate

• Fat-Metabolism – Zone: Basics endurance training 1

• Suitable for: beginners and advanced users

• Type of training: light cardio training

• Goal: activation of fat metabolism (calorie burning). improvement in endurance performance.

• Training heart rate = 60 to 70% of the maximum heart rate

• Aerobic – Zone: Basics endurance training 1 to 2

• Suitable for: beginners and advanced

• Type of training: moderate cardio training.

• Goal: Activation of the fat metabolism (calorie burning), improving aerobic performance, Increase in endurance performance.

• Training heart rate = 70 to 80% of the maximum heart rate

• Anaerobic – Zone: Basics endurance training 2 Suitable for advanced and competitive athletes

• Type of training: moderate endurance training or interval training Goal: improvement of lactate tolerance, the maximum increase in performance.

• Training heart rate = 80 to 90% of the maximum heart rate

• Competition – Zone: Performance / Competition Training

• Suitable for: athletes and high-performance athletes

• Type of training: intensive interval training and competition training / Goal: improvement of maximum speed and power.
  Attention! Training in this area can lead to overloading of the cardiovascular system and damage to health.

• Training heart rate = 90 to 100% of the maximum heart rate

Sample calculation

Male, 30 years old and weighs 80 kg. I am a beginner and would like to lose some weight and increase my endurance.

1. Maximum pulse – calculation
   • Maximum heart rate = 214 – (0.5 x age) – (0.11 x body weight) Maximum heart rate = 214 – (0.5 x 30) – (0.11 x 80)
   • Maximum pulse = approx. 190 beats/min
2. Training heart rate calculation
   • Due to my goals and training level, the fat metabolism zone suits me best.
   • Training heart rate = 60 to 70% of the maximum heart rate Training heart rate = 190 x 0.6 [60%]

Training heart rate = approx. 114 beats/min

After you have set your training heart rate for your training condition or Once you have identified goals, you can start training. Most of our endurance training equipment have heart rate sensors or are heart rate belt compatible. So you can check your heart rate on the monitor during the workouts. If the pulse rate is not shown on the computer display or you want to be on the safe side and want to check your pulse rate, which could be incor-rectly displayed due to possible application errors or similar, you can use the

following tools:

• a. Pulse measurement in the conventional way (sensing the pulse beat, e.g. on the wrist and counting the beats within a minute).
• b. Heart rate measurement with suitable and calibrated heart rate measuring devices (available from medical supply stores).
• c. Heart rate measurement with other products such as heart rate moni-tors, smartphones….

FREQUENCY

Most experts recommend the combination of a health-conscious diet, which must be adjusted according to the training goal, and physical exer-cise three to five times a week. A normal adult needs twice a week exer-cise to maintain its current condition. To improve his condition and change his body weight, he needs at least three training sessions per week. Ideal of course is a frequency of five training sessions per week.

TRAINING PLAN

Each training session should consist of three training phases: „warmup phase“, „training phase“ and „cool-down phase“. In the „warm-up phase“ the body temperature and the oxygen supply should be increased slowly. This is possible through gymnastic exercises over a period of five to ten minutes. After that you start with actual training “training phase”. The training load should be adapted according to the training heart rate. In order to support the circulation after the training phase and to preventaching or strained muscles later, it is necessary to follow the training phase with a cool-down phase. This should be consist of stretching exercises and/ or light gymnastic exercises for a period of five to ten minutes.

Example – stretching exercises for the warm-up and cool-down phases

Start your warm-up by walking on the spot for at least 3 minutes and then perform the following gymnastic exercises to the body for the training phase to prepare accordingly. The exercises do not overdo it and only as far run until a slight drag felt. This position will hold for a while.

• Reach with your left hand behind your head to the right shoulder and pull with the right hand slightly to the left elbow. After 20sec. switch arm.
• Bend forward as far forward as possible and let your legs almost stretched. Show it with your fingers in the direction of toe. 2 x 20sec.
• Sit down with one leg stretched out on the floor and bend forward and try to reach the foot with your hands. 2 x 20sec.
• Kneel in a wide lunge forward and support yourself with your hands on the floor. Press the pelvis down. Change after 20 sec leg.

MOTIVATION

The key to a successful program is regular training. You should set a fixed time and place for each day of training and prepare yourself mentally for the training. Only train when you are in the mood for it and always have your goalin view. With continuous training you will be able to see how you are progressing day by day and are approaching your personal training goal bit by bit.

PARTS LIST – SPARE PARTS LIST

• Type: Walking Pad 4.1 / 4.2
• Order-No.: 2425 – 2426
• Date of technical data: 22.07.2024
• Dimensions approx: [cm]: c
• Space requirements [m2]: 4 m2
• Weight approx. [kg]: 22 kg
• Load max. (User weight) [kg]:120 kg
• Electrical data: 220-240V/50-60Hz /500

FEATURES

• 0,7 HP Motor continuous (0,5Kw), maximum 1,2 HP Motor Peak (0,9Kw)
• Speed from 1 km/h – 6 km/h (adjustable in 0,1 km/h steps)
• 1 manual program with targets of Time, Distance, and Calories
• 6 installed programs with different speed
• Bumpers for vibration-absorbing running surface
• LED Display showing: Time, Speed, Distance, approx. Calories Consumption and pulse
• Remote controller for easy handling
• Bluetooth-Connection for KINOMAP (APP for IOS and Android)
• Bluetooth-Connection for a chest belt
• I transport rollers for an easy and comfortable moving to a location
• Rubber feet for vertical storage
• Walking surface approx. L 100 x W 40 cm

NOTE

Please contact us if any components are defective or missing, or if you need any spare parts or replacements in the future.

Top-Sports Gilles GmbH

• Friedrichstraße 55, 42551 Velbert
• www.christopeit-sport.com
• Telefon: +49 (0)20 51 / 60 67-0
• Telefax: +49 (0)20 51 / 60 67-44
• e-mail: info@christopeit-sport.com

This product is created only for private Home sports activity and is not allowed to us in a commercial or professional area. Home Sport uses class H/C.

Illustr. No.| ****

Designation

| Dimension mm| Quan- tity| Attached to Illustration No.| ET-Number Walking Pad 4.1

No. 2425

| ET-Number Walking Pad 4.2

No. 2426

---|---|---|---|---|---|---
 |  |  |  |  |  |
1| Spring washer| for M8| 2| 4| 39-9864-VC| 39-9864-VC
2| Nylon nut| M8| 2| 7| 39-9818-CR| 39-9818-CR
3| Standing feet|  | 2| 36| 36-2425-13-BT| 36-2425-13-BT
4| Hex head screw| M8x25| 2| 24| 39-10455| 39-10455
5| Remote controller|  | 1|  | 36-2425-02-BT| 36-2425-02-BT
6| Coil|  | 1| 19+36| 36-2025-06-BT| 36-2025-06-BT
7| Hex head screw| M8x40| 2| 24+36| 39-10125-VC| 39-10125-VC
8| Overlay|  | 1| 9| 36-2425-12-BT| 36-2425-12-BT
9| Upper motor cover|  | 1| 27+36| 36-2425-01-BT| 36-2426-01-HZ
10| Hex head screw| M6x55| 1| 12+36| 39-10450-VC| 39-10450-VC
11| Washer| 6//12| 1| 10| 39-10013| 39-10013
12| Front roller|  | 1| 36| 33-2425-03-SW| 33-2425-03-SW
13| Right side rail|  | 1| 38| 36-2425-05-BT| 36-2426-05-HZ
14| Display board|  | 1| 9+19| 36-2425-03-BT| 36-2425-03-BT
15| Truss head screw| M6x16| 1| 12| 39-10120-VC| 39-10120-VC
16| Left side rail|  | 1| 38| 36-2425-06-BT| 36-2426-06-HZ
17| Cross head screw| M6x35| 4| 36+38| 39-10085| 39-10085
18| Cross head screw| 3×8| 9| 14+19| 39-10127| 39-10127
19| Electric controller|  | 1| 27| 36-2425-09-BT| 36-2425-09-BT
20| Wire for EMI|  | 1| 19| 36-1830-30-BT| 36-1830-30-BT
21| Earth cable|  | 1| 22| 36-1142-35-BT| 36-1142-35-BT
22| Main switch|  | 1| 27| 36-1352-29-BT| 36-1352-29-BT
23| Wire for power switch|  | 2| 22| 36-1830-30-BT| 36-1830-30-BT
24| Motor|  | 1| 36| 33-2425-04-SI| 33-2425-04-SI
25| AC cable|  | 1| 22| 36-9836113-BT| 36-9836113-BT
26| Motor belt|  | 1| 12+24| 36-2425-14-BT| 36-2425-14-BT
27| Bottom motor cover|  | 1| 9+36| 36-2425-04-BT| 36-2426-04-HZ
28| Cross head screw| 4×10| 4| 29| 36-9206104-BT| 36-9206104-BT
29| Wheel shaft|  | 2| 30| 36-2425-14-BT| 36-2425-14-BT
30| Transportation wheel|  | 2| 27| 36-2340-29-BT| 36-2340-29-BT
31| Motor cover pad|  | 2| 27| 36-2340-30-BT| 36-2340-30-BT
32| Cross head screw| 4×14| 8| 27| 36-9206104-BT| 36-9206104-BT
33| Middle foot pad|  | 2| 36| 36-2425-15-BT| 36-2425-15-BT
34| Rear foot pad|  | 2| 36| 36-2425-16-BT| 36-2425-16-BT
35| Nylon nut| M6| 6| 17| 39-9861| 39-9861
36| Main frame|  | 1| 38| 33-2425-01-SW| 33-2425-01-SW
Illustr. No.| ****

Designation

| Dimension mm| Quan- tity| Attached to Illustration No.| ET-Number Walking Pad 4.1

No. 2425

| ET-Number Walking Pad 4.2

No. 2426

---|---|---|---|---|---|---
 |  |  |  |  |  |
37| Reinforced tube|  | 2| 36+38| 33-2425-02-SW| 33-2425-02-SW
38| Running board|  | 1| 36+37| 36-2425-08-BT| 36-2425-08-BT
39| Running belt|  | 1| 12+46| 36-2425-07-BT| 36-2426-07-BT
40| Cross head screw| M6x10| 2| 41+43| 36-9329714-BT| 36-9329714-BT
41| Left end cover|  | 1| 36| 36-2425-10-BT| 36-2426-10-HZ
42| Cross head screw| 4.2×16| 6| 27,41+43| 36-9206104-BT| 36-9206104-BT
43| Right end cover|  | 1| 36| 36-2425-11-BT| 36-2426-11-HZ
44| Inner hex screw| M8x55| 2| 46| 39-10056| 39-10056
45| Washer| 8//14| 4| 4+44| 39-9862| 39-9862
46| Rear roller|  | 1| 44| 33-2425-05-SW| 33-2425-05-SW
47| Cross head screw| M6x25| 2| 36+38| 39-10029| 39-10029
48| Tapping screw| 4×12| 2| 49| 36-9206104-BT| 36-9206104-BT
49| Pipe holder|  | 2| 38+50| 36-2340-34-BT| 36-2340-34-BT
50| Silicon oil pipe|  | 1| 38| 36-2340-33-BT| 36-2340-33-BT
51| Oil sleeve|  | 1| 38| 36-2340-24-BT| 36-2340-24-BT
52| Oil cap|  | 1| 13| 36-2340-23-BT| 36-2340-23-BT
53| Allen tool| 5| 1|  | 36-9116-14-BT| 36-9116-14-BT
54| Assembly and exercise instruction|  | 1|  | 36-2425-17-BT| 36-2425-17-BT

References

• Christopeit Sport - Fitnessgeräte in Top-Markenqualität
• Kinomap
• Blog
• Christopeit GYM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>