fri-jado Type 5 Series Exhaust Hood User Manual

fri-jado Type 5 Series Exhaust Hood

Product Information

Specifications

• Product Name: Exhaust-Hood
• Model Types: Type 5, Type 8, Type 8 AC, Type 8L AC
• Manufacturer Part Number: 9123903 / 2403

Product Usage Instructions

1. Introduction
   Read the instructions carefully before using the machine to ensure safe and efficient operation.

2. General
   The exhaust hood is designed to remove smoke, odors, and grease from the air in your kitchen.

3. Identification of the unit
   Identify the specific model type of your exhaust hood (Type 5, Type 8, Type 8 AC, or Type 8L AC) for reference.

4. Pictograms and symbols
   Familiarize yourself with the pictograms and symbols used on the unit for easy understanding of its functions.

5. Description of the Unit
   Understand the technical specifications and available accessories for your exhaust hood.

6. Installation and First Use
   Follow these steps to unpack, install, and use your exhaust hood for the first time.

7. Unpacking the unit
   Ensure all components are included and undamaged upon unpacking.

8. Installation
   Prepare the exhaust hood and follow specific instructions for installing it on a TDR.

9. Operation and Use
   Learn how to operate and use the exhaust hood effectively.

Switching on the unit
Follow the designated steps to power on the exhaust hood.

FAQ (Frequently Asked Questions)

Q: Can I wash the filters in the exhaust hood?
A: Yes, most filters in the exhaust hood are washable. Refer to the user manual for specific cleaning instructions.

Models

• Exhaust-Hood Type 5
• Exhaust-Hood Type 5 AC
• Exhaust-Hood Type 8
• Exhaust-Hood Type 8 AC
• Exhaust-Hood Type 8L AC

WARNING
Read the instructions before using the machine.

KEEP THIS USER MANUAL FOR FUTURE USE
© 2024 Fri-Jado B.V., Oud Gastel, The Netherlands.

We advise you to contact your supplier for the guarantee period and conditions. Further, we refer to our General Terms and Conditions for Sales and Delivery that are available upon request.
The manufacturer does not accept any liability for damage or injury caused by failing to adhere to these regulations or by not observing the usual caution or care in actions, operation, maintenance, or repair activities, even if not explicitly described in this manual.

As a result of constant commitment to improvement, your unit may deviate in detail from what is described in this manual. For this reason, the given instructions are only a guideline for the installation, use, maintenance, and repair of the unit referred to in this manual. This manual has been composed with the utmost care. The manufacturer shall, however, not be held responsible for any mistakes in this manual nor for any consequences thereof. The user is allowed to copy this manual for their use. Further all rights are reserved and nothing in this manual may be reproduced and/or made public in any way.

Modifications:
In case of unauthorized modifications in or on the unit, every liability on the part of the manufacturer becomes null and void.

INTRODUCTION

General

• This manual describes the exhaust hood. The features and controls are being described, along with directions for the safest and most efficient use, to guarantee a long life of the unit.
• The Exhaust-Hood is available for different types (s) of Fri-Jado equipment (Rotisserie). It can also be placed on single or stacked (double) units.
• All pictograms, symbols, and drawings in this manual apply to all Exhaust-Hood models.

Identification of the unit
The identification plate can be found on the outside of the machine, and contains the following data:

• Name of the supplier or the manufacturer
• Model
• Serial number
• Year of construction
• Voltage
• Frequency
• Power consumption.

Pictograms and symbols
In this manual, the following pictograms and symbols are used:

• WARNING
  Possible physical injury or serious damage to the unit, if the instructions are not carefully followed.

• WARNING
  Hazardous electrical voltage.

• WARNING
  Danger of getting injured by hot surfaces.

• Suggestions and recommendations to simplify indicated actions.

• Recycling symbol.

Safety instructions

• WARNING
  The outside of the unit can be very hot.

• WARNING
  Place no load on top of the unit.

• WARNING
  See installation instructions for grounding requirements.

• WARNING
  Risk of slippery floor: Spills may cause slippery surfaces, clean up promptly.

The user of the unit will be fully responsible for abiding the locally prevailing safety- rules and regulations. The unit may be operated by qualified and authorized persons only. Anyone working on or with this unit must be familiar with the contents of this manual and carefully follow all guidelines and instructions. Never change the order of the steps to be performed. The management must instruct the personnel based on this manual and follow all instructions and regulations. The pictograms, labels, instructions, and warning signs attached to the unit, are part of the safety measures. They may never be covered or removed, and have to be visible during the entire lifetime of the unit.

Immediately repair or replace damaged or illegible pictograms, warnings, and instructions.

• To avoid short-circuiting, never clean the unit using a water hose. For cleaning instructions, see section 5.
• During use, the unit can get very hot.
• The unit must be cleaned regularly to ensure proper functioning.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be done by children without supervision.

Service and technical support
The electrical schematics of your unit are included. In case of malfunctions, you can contact your dealer/service agent. Make sure you have the following data available:

• Model.
• Serial number.

This data can be found on the identification plate.

Storage
If the unit will not be used temporarily and will be stored, follow these instructions:

• Clean the unit thoroughly.
• Wrap the unit from getting dusty.
• Store the unit in a dry, non-condensing environment.

Disposal
Dispose of the machine, and any components or lubricants removed from it safely by all local and national safety and environmental requirements.

DESCRIPTION OF THE UNIT

Technical description

• The exhaust hood uses a fan to lead the emitted dampness and odor through a set of filters.
• The exhaust hood is controlled by the main switch.
• For optimal safety, the filter positioning detection and charcoal (odor) filter pollution detection prevent the Rotisserie(s) from operating (American units only).
• The plating of the unit is made of stainless steel.
• The mains cable is provided with a plug.

Accessories
Your unit contains the following standard accessories:

• Grease filters (2 off).
• Charcoal filters (5 off).
• User manual.

For optional accessories contact: customer.service@frijado.com.

INSTALLATION AND FIRST USE

All packing materials used for this unit are suited for recycling.

After unpacking, check the state of the unit. In case of damage, store the packing material, and contact the transporter within fifteen working days after receiving the goods.

Unpacking the unit

• The exhaust hood is placed in a cardboard box with protective corners on a wooden pallet.
• The charcoal filters are with their plastic protection cover placed on top of the exhaust hood. Around the box, there are two tightening straps.
  • Leave the plastic protection around the charcoal filters as long as possible to minimize the time reduction of the filters.

1. Take the charcoal filters out of the box.
2. Take the unit out of the box.
3. Remove all remaining packing materials and protective layers from the exhaust hood.

Installation

• WARNING
  Place the Exhaust Hood only on a leveled unit. An inclined plane of a maximum of 5° is allowed.

• WARNING
  Ensure there is sufficient freedom above the unit.

• WARNING
  Note the mass of the exhaust hood. Lift the hood with two or more persons.

• WARNING

  • Electric shock hazard. Grounding instructions: only connect the appliance to an alternating current provided by a grounded wall socket, with a mains voltage per the information indicated on the data plate of the appliance.
  • It is the consumer’s responsibility to make sure the electrical installation conforms with current national and local codes and wiring regulations.
  • Do not use a multi-plug or extension cord. Such can result in fire, electrical shock, or other personal injury.
  • Failure to follow these instructions can result in death or serious injury.
  • Remove the grease filters before placing the exhaust hood to reduce mass for easier lifting.
  • This section describes the installation on a single TDR unit.
  • Nevertheless, installation is possible on other or double units.

Prepare the Exhaust-Hood

1. Remove the two grease filters [1]. Refer to section 5.2

Installing the Exhaust-Hood on a TDR

1. Demount the TDR side plates [4] and [5].

2. TDR5: Demount the TDR top plate [2] above the control compartment.
   TDR8: Demount the TDR top plate [6], demount the ventilation hatch [7] and assemble it on the supplied new top plate.

3. Place the Exhaust-Hood [1] on top of the TDR with the Exhaust-Hood exhaust directly above the TDR control section. Take care of the wiring connected to the bottom of the hood! (only USA models).

4. Secure the Exhaust-Hood with the four bolts [3] to the TDR.

5. Connect the wiring to the TDR according to the electrical diagram of the TDR (only USA models).

6. Remount the side plates [4] and [5].

First use

1. Clean the interior thoroughly.
2. Place the charcoal filters (without the protective plastic bags). Refer to section 5.3.
3. Place the grease-filters. Refer to section 5.2.
4. Switch on the power.
5. Reset the pollution function (only USA models).
6. Check the correct function of the hood.

OPERATION AND USE

Switching on the unit
Switch on the exhaust hood with the power button.

Filter position detection (USA models only)

• The hood is provided with a detection on every filter. When they are not placed correctly the warning light will lit and the Rotisserie(s) below the hood will be prevented from operating.
• Ensure that all filters are placed correctly.

Charcoal (odor) filter pollution detection (USA models only)

• The charcoal filters are monitored for pollution. Once pollution is detected the function will be set the Grill(s) below the hood will be prevented from operating and the reset button will lit.
• Replace the charcoal filters and press the reset button to activate the function.

Switching off the unit
Switch off the exhaust hood with the power button.

Warnings on the grill unit (USA models only)
When the Exhaust hood is not in correct operating condition the following messages can be shown:

Message hood operation

1. Switch on the Exhaust Hood.
2. Press the Exhaust Hood reset button.

Message filter placing

1. Check the correct placement of the hood Charcoal filters (5 off) and grease filters (2 off).

Message filter polluted

1. Replace the polluted filters.
2. Reset the filter detection.

CLEANING AND MAINTENANCE

• WARNING
  The appliance must be disconnected from the power supply during cleaning or maintenance and when replacing parts.

• WARNING

  • Never use a water hose for cleaning. Water can seep into the unit through the ventilation holes of the unit.
  • Because of hygiene aspects and the optimum condition of the unit, it is of utmost importance to keep a daily cleaning pattern from first use onwards.

Maintenance schedule

Item

| Action|

Frequency

---|---|---
Exterior| ·         Clean

·         Use Stainless Steel cleaning spray to remove stains, and restore the gloss.

| Weekly
Grease-filters| ·         Clean| Weekly
Charcoal (odor) filters| ·         Replace| Semi-annual

Weekly maintenance

WARNING
Do not use aggressive or abrasive materials. These will damage the surface which will make it more difficult to remove dirt.

The exterior:

1. Clean the exterior with a cleaning agent or hot water combined with an appropriate cleaning agent.
2. Dry the exterior thoroughly by using a dry cloth.

Clean the Grease-filters:

1. Switch off the unit.
2. Remove the grease filters by moving the metal housing upwards and pulling the bottom section out of the exhaust hood.
3. Clean the filters with a cleaning agent or hot water combined with an appropriate cleaning agent. Let the filters dry.
4. Reassemble the grease filters in reverse order.
5. Switch on the unit.
6. Press the reset button (Only USA models).

Semi-annual maintenance

Exchange the charcoal filters:
Use only original filters.

1. Switch off the unit.
2. Remove first the grease filters, refer to section 5.2.
3. Remove the charcoal filters. Unlock the charcoal filters by turning them counterclockwise.
4. Remove the support bracket [3] (type 8 only).
5. Place new charcoal filters in reverse order.
6. Replace the grease filters.
7. Switch on the unit.
8. Press the reset button (USA models only).

MALFUNCTIONS AND SERVICE

Before you contact your supplier/dealer in case of a malfunction, there are some items you can check yourself:

• Is the power supply working properly?
• Check fuses and differential switches.

Item

| Malfunction|

Possible action

---|---|---
Fan| Fan not spinning| ·     Switch on the unit

·     Check fuses and/or the differential switch

·     Check the fan

Lamp filter

position illuminated (*)

| One or more filters are not placed correctly| ·     Verify the position of all charcoal and grease filters
Reset button illuminated (*)| Charcoal filter detection is disabled.| · Press the reset button

·     Replace the charcoal filters and press the reset button

Rotisserie does not operate (*)| Hood filters not placed correctly and or charcoal filters pollution detection deactivated| ·     Ensure correct placement of the filters (lamp position is off)

·     Press the reset button

Mains cord| Damaged| ·     Replace

(*) USA models only.

Check the fan

WARNING
Remove the power plug from the wall socket.

1. Switch off the unit.
2. Remove the power plug from the wall socket.
3. Remove the fan plate on top of the exhaust hood.
4. Check what’s blocking the fan blade.

Replacing the mains cord

WARNING
Hazardous electrical voltage.

If the mains cord is damaged, it must be replaced by the manufacturer, his service agent or a similarly qualified person in order to avoid hazards.

TECHNICAL SPECIFICATIONS

WARNING
Consult the identification plate to get the proper specifications of the unit. The electrical data may vary from country to country.

European Models

Model| Type 5| Type 5 AC| Type 8| Type 8 AC| Type 8L AC
---|---|---|---|---|---
Dimensions|  |  |  |  |
–     Width| 835 mm| 885 mm| 995 mm| 1045 mm| 1285 mm
–     Depth| 855 mm| 930 mm| 970 mm| 1080 mm| 1080 mm
–     Height| 375 mm| 375 mm| 375 mm| 375 mm| 375 mm
Weight|  |  |  |  |
–     Gross| 85 kg| 95 kg| 97 kg| 105 kg| 125 kg
–     Net| 72 kg| 77 kg| 77 kg| 85 kg| 90 kg
Maximum ambient temperature| 35 °C| 35 °C| 35 °C| 35 °C| 35 °C
Sound pressure| < 70 dB(A)| < 70 dB(A)| < 70 dB(A)| < 70 dB(A)| < 70 dB(A)
Electrical installation|  |  |  |  |
–     Voltage| 1N~ 230 V| 1N~ 230 V| 1N~ 230 V| 1N~ 230 V| 1N~ 230 V
–     Frequency| 50/60 Hz| 50/60 Hz| 50/60 Hz| 50/60 Hz| 50/60 Hz
–     Required power| 0.4 kW| 0.4 kW| 0.4 kW| 0.4 kW| 0.4 kW
–     Max. nom. current| 1.5/1.7 A| 1.5/1.7 A| 1.5/1.7 A| 1.5/1.7 A| 1.5/1.7 A
Plug1| Schuko 16 A| Schuko 16 A| Schuko 16 A| Schuko 16 A| Schuko 16 A
Length of power cable| 2,20 m| 2,20 m| 2,20 m| 2,20 m| 2,20 m

American Models

Fri-Jado B.V.

• Blauwhekken 2  4751 XD Oud Gastel The Netherlands
• Tel: +31 (0) 76 50 85 400

Fri-Jado Inc.

• 1401 Davey Road, Suite 100 Woodridge IL 60517 USA
• Tel: +1-630-633-7950

www.frijado.com.

References

• Fri-Jado - Making food irresistible
• Fri-Jado - Making food irresistible

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>