KOLPIN KP-32005 Front Door Bags for Polaris Ranger Instructions
- August 30, 2024
- KOLPIN
Table of Contents
KOLPIN KP-32005 Front Door Bags for Polaris Ranger
Specifications
- Product Name: Polaris Ranger XP 1000 Front Door Bags
- Part Number: 32005
- Application: 32000 Kolpin Ranger Front Lower Doors
- Assembly Time: Approximately 6 minutes
- Warranty: One-Year Limited Warranty
Product Usage Instructions
- Before You Begin:
- Read these instructions and check to be sure all parts and tools are accounted for.
- Please retain these installation instructions for future reference and parts ordering information.
- Note: If any hardware is missing, do not return to the store. Call us to help, Toll Free 1-877-956-5746.
- Assembly Time: Approximately 6 minutes
- Note: The 32005 kit comes fully assembled from the factory.
- Important: Your Kolpin Ranger XP 1000 Front Door Bag is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the sequence shown. Additional time may be required to accommodate other installed accessories.
- INSTALLATION INSTRUCTIONS:
1. Shift vehicle transmission into “PARK”. Turn the ignition key to the “OFF” position and remove it from the vehicle ignition.
2. Position LH bag onto LH Door. Wrap and tie the Velcro straps to the door at the five places as shown in the figure.
3. Repeat step 2 to install the RH bag onto the RH door.- Additional Notes:
- Ensure the vehicle is clean and free of debris for easier installation.
- Perform all installation steps correctly in the sequence shown for safety and satisfactory installation.
- For Assistance:
- For additional assistance, please contact Kolpin customer service department at 877-956-5746 or 763-478-5800 or email customerservice@kolpin.com.
Warranty
One-Year Limited Warranty
For one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or parts found upon examination by Kolpin to be defective in material, workmanship, or both. All transportation costs incurred submitting a product to Kolpin for warranty consideration must be borne by the purchaser. If Kolpin determines that the product must be returned to the factory for credit, please call 1-877-956-5746 for a Return Merchandise Authorization (RMA) number and shipping instructions. This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improper maintenance, normal wear, or other causes beyond the manufacturer’s control. To protect you and your ATV, certain parts of the accessory system and/or hardware are designed to fail when the equipment is over-stressed. Parts that are lost due to loosening and improper maintenance are not covered under warranty. This warranty does not cover removal or reinstallation labor fees of the door system and related components. Peripheral products such as engines, electric motors, and actuators may carry an original manufacturer’s warranty. Most hardware is general and is easily obtained locally. Be sure to replace with minimum metric class 8.8 specification.
FAQs
- Q: What should I do if any hardware is missing?
- A: Do not return to the store. Call Toll-Free at 1-877-956-5746 for assistance.
- Q: What should I do if I need warranty service?
- A: Contact Kolpin for warranty considerations. Transportation costs for warranty submissions must be borne by the purchaser.
- Q: Are replacement parts easily available?
- A: Most hardware is general and easily obtained locally. Ensure replacements meet minimum metric class 8.8 specifications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>