KOLPIN OUTDOORS 30816 Stronghold Auto-Latch Instruction Manual
- June 3, 2024
- KOLPIN OUTDOORS
Table of Contents
Stronghold Auto-Latch
Product Instruction | Part No: 30816
KIT CONTENTS
REF
|
QTY
|
PART DESCRIPTION
---|---|---
1
| 1| Auto-latch Bracket
2
|
2
|
M10 x 115mm Hex Bolt
3
|
2
|
M10 Locknut
4
|
4
|
M6 x 115mm Hex Bolt
5
|
8
|
M6 Washer
6
|
4
|
M6 Locknut
BEFORE YOU BEGIN
- Verify all parts and tools are accounted for. If parts are missing, do not return to the store. Please contact Kolpin customer service department at 877-956-5746 or 763-478-5800 or email customerservice@kolpin.com.
- Follow all steps correctly and in the sequence described.
- Keep these instructions for future reference or for informational requests.
- To facilitate installation, make sure that your vehicle is clean and free of debris.
Kolpin Outdoors) Ine!| 9955 59th Ave N | Plymouth, MN 55442
877-956-5746 or
763-478-5800 |
kolpin.com | customerservice @kolpin.com
ACCESSORY MOUNTING INSTRUCTIONS
Note: This kit includes hardware for two different mounting configuration options. See options below.
Side Mounting Instructions:
1. Place Auto-Latch Bracket in the preferred
mounting location. See Illustration 1-1.
53450 Overbed Rack
(Example Only – Included)
TIP: Angling the front of the Auto-Latch
downward improves the retention of the
Stronghold accessory. See Illustration 1-2.
2. Fasten Auto-Latch Bracket to the side
mounting surface using two M10 x
115mm Hex Bolts and two M10 Lock-
nuts. See Illustration 1-3.
3. Tighten hardware.
ACCESSORY MOUNTING INSTRUCTIONS
Bottom Mounting Instructions:
1. Determine mounting location for Auto-
Latch Bracket on flat surface. If needed,
drill the mating hole pattern as shown.
See Illustration 1-1.
2. Fasten the Auto-Latch Bracket to the flat
surface using four M6 x 35mm Hex Bolts,
eight M6 Washers and four M6 Locknuts.
See Illustration 1-2.
3. Tighten hardware.
USE AND CARE INFORMATION:
- Check the accessory mounts frequently and retighten necessary.
- When this accessory Becomes dirty, rinse thoroughly with cool water to remove loose dirt then wipe with a clean cloth or sponge.
- Never use petroleum solvents such as gasoline, thinner, benzene, acid or alkaline cleaners.
ONE YEAR LIMITED WARRANTY
For the period of one (1) year from the purchase date. Kolpin will replace for the original purchaser, free of charge, any part or parts found upon examination by Kolpin to be defective in material, workmanship, or both
All transportation costs incurred submitting product to Kolpin for warranty
consideration must become by the purchaser. If Kolpin
Determines that the product must be retuned to the factory for credit, please
call 1-577-050-5746 for a Return Merchandise Authorzation (RMA) number and
shipping instructions.
This warranty does not apply to parts that have been damaged by accident,
alteration, abuse, improper maintenance, normal wear, of there causes beyond
the manufacturer’s contr. n order to protect you and your ATV. certain pars of
the accessory system and lor hard
“ware are designed for fail when the equipment is over stressed. Part that are
lost due to loosening and improper maintenance are not overed under warranty,
This warranty does not cover removal or reinstallation labor feat of the
accessory system and related components. Most hardware is general in nature
and fs easily obtained locally. Be sure to replace with minimum metric class
88 specification.
Kolpin Outdoors, Inc.
Telephone: (763)-478-5800
Toll Free: (877)-956-5746
Fax Number: (800)-245-7569
Email: customerservice@kolpin.com
www.kolpin.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>