KOLPIN 20-0050 Snatch Block Kit Instruction Manual

: June 9, 2024
: KOLPIN

Table of Contents

Model Number 20-0050 Parts List
20-0050 – SNATCH BLOCK ASSEMBLY INSTRUCTIONS
One Year Limited Warranty
CUSTOMER SUPPORT
Documents / Resources

KOLPIN 20-0050 Snatch Block Kit

20-0050 Snatch Block Kit

Model Number 20-0050 Parts List

ITEM NO.	QTY.	PART NUMBER	DESCRIPTION

1

| 2| 20-0050 CPO 1| PLATE-SNATCH BLOCK
2| 1| PUR3266|

PULLEY-ALUMINUM

3

| 1| PUR1361| BUSH ING-ROLLER
4| 1| 66351|

PIN-LOCK

5

| 1| PURl 156| 5/16″ X 1-1/2″ SHOULDER BOLT
6| 1| PUR1274|

5/16″ NYLOC NUT

7

| 6| PUR3087| FLAT WASHER fW3
8| 1| RPR0093|

ST RAP-LIFT

20-0050 – SNATCH BLOCK ASSEMBLY INSTRUCTIONS

Locate the 5/16” hole in the rear of the Blade Position lever bracket (This is the angle bracket that the blade position lever is attached to) as shown in Illustration 1-1. The rear hole in this bracket is where the Pulley System will attach.
Insert the bushing into the aluminum pulley. Place 1 each of the metal side plates and place on each side of the pulley. Insert the
5/16 bolt through the side plate hole, into the bushing and then out the other side plate. Secure with the 5/16” nyloc nut. Do not tighten at this time.
Pull the winch cable out of the winch and wrap the cable around the pulley so the cable exits upwards towards the bumper.
Place the assembly on the Blade Position lever bracket so the open holes of the straps opposite of the pulley line up with the hole in the bracket. Use 3 washers on each side of the lever bracket and the pulley strap plates and secure with the 5/16” Pin lock (6 total). Be sure to snap close the bail on the pin. Tighten the 5/16” nyloc nut on the pulley. When tightened, the pulley should be able to rotate freely. See Illustration 1-2.
Wrap the supplied soft-tie strap around the bumper and then back through itself. The end loop is where the winch hook will attach. Attach the winch hook to the strap and the assembly is done.
This Snatch Block Pulley system is necessary for Plow applications where the winch cable geometry is not sufficient to provide smooth lifting of the plow blade. Many FRONT MOUNT plow systems will require this for proper lift control and longer cable life.

Kolpin – The Leader in All-Terrain Innovation, offers only the highest quality ATV Accessories and UTV Accessories. Kolpin A TV products and UTV products are designed for recreational ATV and UTV riders, hunters, outdoorsmen, and landowners just like you. Honest value and rugged dependability that helps you get the most out of your ATV or Side x Side vehicle.

Kolpin has the largest selection of ATV accessories and UTV accessories for Polaris, Yamaha, Honda, Can-Am, Kawasaki, Suzuki, John Deere and most other ATV models and UTV models. Whether you are looking for winches, plows, ATV storage, fuel packs, LED lights, Gun Boots, gear grips, UTV roofs, UTV windshields, rider accessories, or implements – Kolpin has you covered.

Our world starts where the road ends … we welcome you to explore our world.

We invite you to visit www.kolpin.com to check out our full offering of accessories.
Explore our world and you will not only find product information, but product videos, reviews, customer testimonials, helpful how-to articles, exclusive promotions and so much more.

Scan this code with your smart phone to experience the world of Kolpin for yourself

Follow Ko/pin for exclusive deals, new product releases and more

KOLPIN OUTDOORS, INC
205 N DEPOT ST
FOX LAKE, WI 53933
PH. 877.9KOLPIN FAX. 920.928.3687
EMAIL.CUSTOMERSERVICE@KOLPIN.COM
WEB.WWW.KOLPIN.COM

One Year Limited Warranty

For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or parts found upon examination by Kolpin to be defective in material, workmanship, or both.

All transportation costs incurred submitting product to Kolpin for warranty consideration must be borne by the purchaser. If Kolpin determines that the product must be returned to the factory for credit, please call 1-800-841-2222 for a Return Merchandise Authorization (RMA) number and shipping instructions.

This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improper maintenance, normal wear, or other causes beyond the manufacturer’s control. In order to protect you and your ATV, certain parts of the plow system and/or hardware are designed to fail when the equipment is over-stressed. Parts that are lost due to loosening and improper maintenance are not covered under warranty.

Peripheral products such as engines, electric motors, and actuators may carry an original manufacturer’s warranty. Most hardware is general in nature and is easily obtained locally. Be sure to replace with minimum grade 5 specification.