KOLPIN OUTDOORS 53460 2 Inch Receiver Hitch Cargo Carrier Instruction Manual
- October 27, 2023
- KOLPIN OUTDOORS
Table of Contents
OUTDOORS 53460 2 Inch Receiver Hitch Cargo Carrier
Instruction Manual
KIT CONTENT
REF | QTY | PART DESCRIPTION |
---|---|---|
1 | 1 | Basket |
2 | 1 | Receiver Frame |
3 | 2 | Support Brace |
4 | 4 | Carriage Bolt – M10 x 1.5mm x 25mm |
5 | 2 | Carriage Bolt – M10 x 1.5mm x 75mm |
6 | 6 | Locknut – M10 x 1.5mm Thread |
7 | 1 | Hitch Stabilizer Plate |
8 | 1 | Square U-Bolt – M12 |
9 | 2 | Flat Washer – M12 |
10 | 2 | Lock Washer – M12 |
11 | 2 | Locknut – M12 |
12 | 1 | Hitch Pin & Clip |
TOOLS REQUIRED:
- 15mm Socket
- 19mm Socket
- Torque Wrench
BEFORE YOU BEGIN
- Verify all parts and tools are accounted for. If parts are missing, do not return to the store. Please contact Kolpin customer service department at (877) 956-5746 or (763) 478-5800 or email customerservice@kolpin.com.
- Follow all steps correctly and in the sequence described.
- Keep these instructions for future reference or for informational requests.
- To facilitate installation, make sure that your vehicle is clean and free of debris.
SAFETY INFORMATION
INSTALLATION
WARNINGS
Read and follow the entire installation manual prior to installing or using
the accessory, or operating a vehicle with the accessory mounted.
USAGE
WARNINGS
- Weight Capacity: 300 lbs on-road; 150 lbs off-road.
- Rack is rated for 300 lbs on-road, 150 lbs off-road with evenly distributed weight in the basket.
- Improperly loading Hitch Cargo Carrier can result in serious injury or death. Do not exceed vehicle’s receiver max tongue weight. Ensure cargo is properly secured.
- Exceeding the vehicle’s receiver max tongue weight can impact vehicle stability and control.
- Do not carry flammable items on the Hitch Cargo Carrier. Do not allow exhaust fumes to blow directly on cargo.
- Do not use if product is damaged.
MOUNTING INSTRUCTION
-
Assemble Basket to Receiver Frame using (4) M10 x 25mm Carriage Bolts, (2) M10 x 75mm Carriage Bolts and (6) M10 Locknuts. See Illustration 1-1.
-
Torque the M10 Carriage Bolts to the specification below.
M10 X 25MM CARRIAGE BOLT TORQUE (QTY 4) : 35 ft. lb. (48 Nm)
M10 X 75MM CARRIAGE BOLT TORQUE (QTY 2) : 30 ft. lb. (41 Nm) -
Carefully lift and insert the Hitch Cargo Carrier into your vehicle’s 2″ Receiver and install Hitch Pin & Clip. See Illustration 1-2.
-
Assemble Hitch Stabilizer components as shown. The angled lip of the Stabilizer Plate should come in contact with the bottom of the Receiver Frame. See Illustration 1-3.
-
Torque the M12 U-Bolt Locknuts to the specification below.
OPTIONAL ACCESSORY MOUNTING (SOLD SEPARATELY):
The modular mounting hole pattern on the sides of the Basket is compatible
with a variety of Kolpin accesso-ries. See list of compatible products below.
Visit kolpin.com for updated compatibility information.
Product | Part Numbers |
---|---|
Rhino Grip Pro | 21560 |
Rhino Grip XLR | 21550, 21551 |
Rhino Grip XL | 21510, 21515, 21535 |
Rhino Grip Ratcheting | 21540 |
Rhino Grip Flex | 21570, 21571 |
Stronghold Gun Boot Auto-Latch Bracket | 30816 |
USE AND CARE INFORMATION:
- Check the accessory mounts frequently and retighten if necessary.
- When this accessory becomes dirty, rinse thoroughly with cool water to remove loose dirt, then wipe with a clean cloth or sponge.
- Never use petroleum solvents such as gasoline, thinner, benzene, acid or alkaline cleaners.
- For additional assistance, please contact Kolpin customer service department at (877) 956-5746 or (763) 478-5800 or email customerservice@kolpin.com
ONE YEAR LIMITED WARRANTY
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or parts found upon examination by Kolpin to be defective in material, workmanship, or both. All transportation costs incurred submitting product to Kolpin for warranty consideration must be borne by the purchaser. If Kolpin determines that the product must be returned to the factory for credit, please call 1-877-956-5746 for a Return Merchandise Authorization (RMA) number and shipping instructions. This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improper maintenance, normal wear, or other causes beyond the manufacturer’s control. In order to protect you and your ATV, certain parts of the accessory system and/or hardware are designed to fail when the equipment is over-stressed. Parts that are lost due to loosening and improper maintenance are not covered under warranty. This warranty does not cover removal or rein-stallation labor fees of the accessory system and related components. Most hardware is general in nature and is easily obtained locally. Be sure to replace with minimum metric class 8.8 specification.
Kolpin Outdoors, Inc.
Telephone: (763)-478-5800
Toll Free: (877)-956-5746
Fax Number: (800)-245-7569
www.kolpin.com
Email: customerservice@kolpin.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>