TORRAS WX3 Ostand Wireless Charger User Manual
- August 30, 2024
- TORRAS
Table of Contents
TORRAS WX3 Ostand Wireless Charger
Product Information
Specifications
- Product Name: Ostand Wireless Charger
- Product Model: WX3
- Input: 5V 2.4A/9V 3A
- Output: 15W MAX
- Charge Sensing Distance: 5mm
- Working Temperature: Compatibility
- Compatibility: iPhone 12 and above models
- Package Contents: Wireless Charger, Charging Cable
Product Usage Instructions
-
Initial Setup
Insert the charging cable and turn on the power. The fan and semiconductor will turn on by default. The white indicator light of the function button turns off after 10 seconds. -
Turning Off Fan and Semiconductor
Press and hold the function button for 3 seconds to turn off the fan and semiconductor. The indicator light of the function button will flash quickly for 3 seconds. Reinsert the charging port to turn on the fan and semiconductor. -
Wireless Charging
Place the wireless charger on the back of the phone to start fast wireless charging. The white indicator light of the function button turns off after 3 seconds. -
Vertical Support with Bracket Extension
Extend the bracket of the wireless charger for vertical support on the desktop. It supports charging while standing, perfect for entertainment and chats. -
Horizontal Support with Bracket Extension (iOS 17)
Extend the bracket of the wireless charger for horizontal support on the desktop to activate Phone Standby mode (supported by iOS 17). It supports charging while standing, ideal for binge-watching, online classes, or meetings. -
Storage
When not in use, retract the bracket for easy pocket/pack storage. Convenient for outdoor activities, business trips, and travel.
Frequently Asked Questions (FAQ)
-
What phones are compatible with this wireless charger?
This wireless charger is compatible with iPhone 12 and above models. -
What should I avoid when using this wireless charger?
Avoid using non-MagSafe cases such as Otterbox Defender cases, cases thicker than 2mm, metal/magnet/credit card interference, and foreign objects between your phone and the charger’s surface to prevent charging issues or overheating.
Overview
- Wireless Charging Zone
- Function Button
- USB-C Charging Port
- Bracket
- Heat Dissipation Holes
Using Instructions
- Insert the charging cableand turn on the power, the fan and semiconductor turn on by default, white indicator light of the function button turns off after 10s.
- Press and hold the function button for 3s to turn off the fan and semiconductor, and the indicator light of the function button flashes quickly for 3s. Reinsert the charging port to turn on the fan and semiconductor.
- Place the wireless charger on the back of the phone to start fast wireless charging.
- Extend the bracket of the wireless charger for vertical support on the desktop, perfect for entertainment and chats, it supports charging while standing.
- Extend the bracket of the wireless charger for horizontal support on the desktop to activate the Phone Standby mode (only supported by iOS 17), making it easier for binge-watching, online classes, or meetings, it supports charging while standing.
- The bracket supports a 360° and 120° rotating angle for hands-free convenience.
- When not in use, retract the bracket for easy pocket/pack storage, convenient for outdoor activities, business trips, and travel.
- Note Charge sensing distance The distance between the internal sensing coil of the cell phone and the wireless charger is 5mm, so please avoid bringing a thicker cell phone case.
- The internal sensing coil of the wireless charger is a thicker cell phone case
- Warning: Charging is not supported in the following three scenarios due to interference from metal/magnets/ credit cards. Please remove them before charging.
Specifications
The parameters above are derived from the laboratory of TORRAS. The actual parameters would be different due to the production process and other factors. The image shown here is indicative only.
Important Safety Instructions
- This product is only suitable for iPhone 12 and above models, not for charging other brand products.
- Please make sure your phone supports wireless charging, otherwise it will not be able to charge.
- This wireless charger is not compatible with non-Mag-Safe cases such as Otterbox Defender cases. Do not use a case that is more than 2mm thick or it will not charge.
- Do not place any foreign objects between your phone and the wireless chargerʼs surface, including metal plates on a car mount, credit cards, keys, coins, metal objects, or NFC cards, which will make wireless charging fail or cause overheating.
- Do not disassemble, hit, crush, or throw it into fire. Incorrect reassembly may result in fire or a risk of injury.
- Do not use this product under severe high temperature, humidity, or corrosive conditions to avoid damaging the circuitry with leakage.
- Do not spill water or other liquids on the wireless charger. If you need to clean it, please make sure the power is disconnected.
- When charging, please keep the distance between the implanted medical device (pacemaker, cochlear implant, etc.) and the wireless charger at least 20cm to avoid potential interference with the medical device.
- When using a charger for power supply, please purchase or use a charger that has obtained certification and meets the standard requirements. Please use a single-port charger with output above
- Use of power cords or chargers other than those recommended or sold by the manufacturer of this product may result in a risk of fire or personal injury.
- Do not use an adapter with an output of 5V 1A (5W) or lower.
- High temperatures can reduce charging speed and limit power, which is a common issue with all wireless chargers. It is recommended to charge your device in environments with temperatures below 25°C / 77°F.
- The phone case and the position of your device on the wireless charger will affect the charging speed. The further the device is from the center of the wireless charger, the slower the charging speed will be.
- For optimal charging performance, align your smartphone with the coil in the center of the wireless charger. If the charging icon does not appear on your smartphone, adjust its placement. Ensure the smartphone is always centered on the wireless charger.
- During charging, this product may generate heat. This is normal, please do not worry. If overheating occurs, please stop using it temporarily.
- Misuse, dropping, or excessive abrasion may cause product damage.
- Do not use harmful chemicals or detergents to clean this product.
- Please store this product in a cool and dry place, do not store this product in a hot or humid environment.
- Keep this product out of reach of children.e 30W.
Warranty Card
FCC STATEMENT
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used per the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>