Shark StainStriker Vacuum Cleaner Instruction Manual

Shark StainStriker Vacuum Cleaner

Product Specifications:

• Brand: Shark
• Model: Spot Cleaner
• Usage: Deep cleaning of carpets and upholstery
• Formula Compatibility: Shark Deep Clean Pro/ Oxy Multiplier formula
• Power Source: Electric

Product Usage Instructions

Safety Guidelines:

1. Ensure proper grounding of the appliance to avoid electric shock.
2. Do not modify the plug or force it into a socket.
3. Avoid contact with sharp edges or corners with the cord.
4. Only use the recommended formula in the correct tanks.
5. Take precautions to prevent slipping on wet surfaces.

Preparation:

1. Inspect all parts for damage or wear before each use.
2. Ensure the appliance is dry and free of any external moisture before operation.
3. Place the Spot Cleaner on a flat, even surface.

Operation:

1. Turn off and unplug the Spot Cleaner before any adjustments or maintenance.
2. Avoid spraying solution on skin or in eyes.
3. Do not operate without all necessary tanks and filters in place.

Cleaning and Maintenance:

1. Do not immerse the body of the Spot Cleaner in water; wipe with a dry cloth to clean.
2. Remove and fill solution tanks separately from the appliance.

Scan QR to view
HOW-TO VIDEOS and more.

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmentally safe recycling.

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY
READ CAREFULLY BEFORE USE – SAVE THESE INSTRUCTIONS. FOR HOUSEHOLD USE ONLY; READ ALL INSTRUCTIONS BEFORE USING THIS SPOT CARPET/UPHOLSTERY CLEANER

REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY OR PROPERTY DAMAGE

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the socket is properly grounded.

2. DO NOT modify the plug provided with the appliance.

3. DO NOT force into socket or try to modify it.

4. DO NOT pull, close door, or wrap around sharp edges or corners on the cord. To unplug, grasp the plug, not the cord. Keep cord away from heated surfaces.

5. To reduce the risk of fire or electric shock due to internal component damage, use ONLY Shark Deep Clean Pro/ Oxy Multiplier formula in the correct tanks, as intended for use with this appliance. See instructions within this guide.

6. The areas around where you are cleaning may become wet, use care to avoid slipping and falling.

7. Use care when removing and reattaching the hand tool to the Spot Cleaner to avoid accidental activation of the cleaning solution.

8. DO NOT spray solution on your skin or in your eyes.

9. DO NOT fill solution tanks while installed on the appliance. Remove before filling.

10. DO NOT operate if there is any wetting of the exterior surfaces of the appliance. If the appliance is wet, dry with a cloth before use.

11. To reduce the risk of shock and unintended operation, turn off and unplug Spot Cleaner before any adjustment, cleaning, maintenance, or troubleshooting.

12. Before each use, carefully inspect each part for damage or wear. If a part is damaged or worn out, immediately discontinue use.
    DO NOT use if any part is damaged or if Spot Cleaner is not working as it should, has been dropped, left outdoors, or dropped into water.

13. DO NOT immerse or spray water on the body of the Spot Cleaner. To clean the surface, wipe with a dry cloth.

14. DO NOT allow to be used by children or as a toy. Close supervision is necessary when used near children.

15. DO NOT handle plug or Spot Cleaner with wet hands.

16. DO NOT use without the dirty water tank, clean solution tank, or filter in place.

17. Use only a identical Shark® replacement parts. Only use Shark® branded filters and accessories.

18. If plugging unit into extension cord, ensure cord is no more than 15m to prevent damage to the motor.

19. DO NOT place Spot Cleaner on uneven surfaces.

20. DO NOT use to pick up:

    • Large objects
    • Hard or sharp objects (glass, nails, screws, or coins)
    • Large quantities of dust (e.g., drywall dust).
    • Smoking or burning objects (hot coals, cigarette butts, or matches)
    • Flammable or combustible materials (lighter fluid, petrol, or kerosene)
    • Toxic materials (chlorine bleach, ammonia, or drain cleaner)

21. DO NOT use in the following areas:

    • Poorly lit areas
    • Outdoor areas
    • Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, petrol, kerosene, paint, paint thinners, mothproofing substances, or flammable dust).

DO NOT: Engage spray trigger unless pointing at the affected area. WARNING: May still spray when the unit is powered off.
SAVE THESE
INSTRUCTIONS

PARTS

• A Deep Clean Pro Tank
• B Dirty Water Tank
• C StainStriker Tank
• D Crevice Tool
• E Tough Stain Tool
• F Hose Cleaning Tool
• G 2x Reversible Bristles
• H 177ml Deep Clean Pro Formula
• I 355ml OXY Multiplier Formula
• J Spray Trigger
• K Power Button
• L Detach Button
• M Wide Tough Stain Tool*
• N Pet Stain Trapping Tool*

Tools sold with the Pet model PX200EUT (or sold separately)

NOTE: Not all accessories come with all units. Tools may vary by model. For additional accessories available, please visit www.sharkclean.eu

GETTING STARTED

1. Detach the Deep Clean Pro Tank from the unit. Turn the tank over, unscrew cap and remove.
2. Add water to the Deep Clean Pro Tank up to the Water fill line. Then add Deep Clean Pro formula to the Concentrate fill line.
3. Replace the cap, then reinstall the tank until it clicks into place.
4. Detach the StainStriker tank from the unit and turn over. Unscrew the cap and pour the StainStriker formula into the tank.
5. Replace the cap and reinstall the tank until it clicks into place.
6. Unwrap the power cable and plug into a power socket. Turn ON unit to begin cleaning.

IMPORTANT: Vacuum with traditional vacuum cleaner first before using Stain Striker.

Use ONLY Shark branded cleaning solutions, Deep Clean Pro/Oxy Multiplier.

WET STAIN CLEANING

1. For Wet Stains, follow the Stain Guide located on the hand tool. Turn ON using the power button and vacuum up the liquid mess. Spray the stain area. Scrub with the bristles, then tilt hand tool forward and drag across the stain area to extract liquid. Repeat if needed. To avoid longer dry times, do not over spray.
   DRY STAIN CLEANING

2. For Dry stains, follow the Stain Guide located on the hand tool. Turn ON using the power button. Scrub the stained area, then spray and scrub again, then tilt hand tool forwards and drag across the stain area to extract liquid. Repeat if needed. To avoid longer dry times, do not over spray.

Note: For hard to reach areas, tool can be used without a hand tool attachment using only the crevice tool set up.

Tip: Choosing the bristles – The rubber bristles are best suited for more delicate surfaces and upholstery. The tough bristles are ideal for stubborn agitation on hard wearing surfaces.

PET STAIN TRAPPING TOOL

The Shark Pet Stain Trapping Tool is included with select models. This extracts unhygienic messes, preventing the mess from reaching the hose and the interior of the unit. DO NOT use the tool to remove pet hair. To use, spray the wet mess, then extract it as advised above. To avoid oversaturating, do not over spray. DO NOT exceed the MAX FILL line on the Pet Tool Cup.

Keep the tool level, without tipping to prevent the mess from reaching the hose. After use, turn off the power of the main unit and empty the tool cup where appropriate. Wash the cup, filter, and the rest of the tool thoroughly with soap and water after each use.

MAINTENANCE

1. Detach the dirty water tank. keeping the tank upright and set down on a level surface. Push the handle all the way back until it clicks, then lift off the lid.
2. Clean the float valve and make sure it can move freely. Remove the foam filter from the unit whilst cleaning.
3. Suitably pour away the dirty liquid from the dirty water tank, tapping off any loose debris. Clean off any other debris on the hand tools, bristles, lid and float valve. Rinse all parts thoroughly with soap and water and allow to air-dry completely before reinstalling.
4. Detach the hand tool by pressing the release button. Remove the cover from the hand tool to clean the air path. Wash the bristles on the hand tool thoroughly.
5. To clear any clogged debris, remove the connecting clip on the bottom of the unit. Clear all debris, then close the door.

NOTE: Clean unit after every use to avoid odours, bacteria, and mould.

CLEANING THE HOSE

1. Make sure the unit is turned off.
   Remove the solution tank and fill tank with water up to the water fill line.

2. Securely attach the hose cleaning tool to the crevice tool

3. Hold the crevice tool in a horizontal position and turn ON the unit. Press and hold the spray trigger for one minute. Repeat the process as needed to remove all dirt and debris from hose.

STORAGE

1. Unplug the unit and place it near a sink,toilet, or drain to empty the remaining liquid from the attached Tool. Clean the unit and all parts (See Maintenance and Cleaning the Hose sections).
2. When cleaning is complete and all parts have dried, reattach all the tools. Wrap up the power cord, then store the hose cleaning tool on the unit. Wrap the hose around the base of the unit and store the hand tool in its holder.

CLEANING & DRYING GUIDE

CLEANING:

• When applying the cleaning solution, only cover the stain at the beginning of the cleaning process. Avoid oversaturating the area, or continual spraying during cleaning.
• For older and tougher stains, allow between 5-20 minutes for the cleaning solution to settle into the stain and get to work.
• For fresh stain cleaning, these can be cleaned immediately after spraying.
• Always agitate the area thoroughly to break up the stain. Brush in multiple directions for best results.
• Always ensure to use the correct solution dilution measures when setting up the unit for cleaning.

DRYING:

• When extracting the liquid, pass over the cleaning area in a uniform pattern, applying downward pressure throughout.
• Angle the hand tool to engage the suction vents parallel to the cleaning surface for optimum suction.
• Continue to pass over the cleaning area until liquid is no longer extracting through the hand tool window.

For information, scan QR to view
HOW-TO VIDEOS.

CLEANING FORMULAS

Shark Deep Clean Pro
Deep carpet cleaning pro formula for removing dirt & grime.

Shark OXY Multiplier
Tough stain eliminating formula for those stubborn stains & odours.

To order refills of Shark® Deep Clean Pro and Shark OxyMultiplier, scan the QR code.

TECHNICAL SPECIFICATIONS

PX200 Series: 220V – 240V, 60 Hz, 450W
RECORD THIS INFORMATION
Model Number: __
Date of Purchase:
(Keep receipt)

Store of Purchase:

©2024 SharkNinja Operating LLC.
SharkNinja Europe Limited, 1st/2nd Floor Building 3150, Thorpe Park, Century Way, Leeds, England, LS15 8ZB.
www.sharkclean.eu
SharkNinja Germany GmbH, Rotfeder-Ring 9, 60327 Frankfurt am Main, Germany.
SHARK and STAINSTRIKER are registered trademarks in the European Union of Sharkninja Operating LLC.
Illustrations may differ from actual product.

TROUBLESHOOTING

both of the solution tanks. Make sure the Deep Clean Pro Tank is installed correctly.

Make sure the unit is plugged in and the power is on.

Low suction or no suction

| Make sure the dirty water tank is not overfilled and is installed correctly.

Check the clog access point underneath the unit and clear any debris trapped inside at the end of the hose.

If a cleaning tool is attached, make sure it is connected correctly. Remove any debris from the cleaning attachments.

Unit not turning on| Make sure the unit is plugged in completely. Try a different socket.

Ensure On/Off button was pressed.

Liquid leaking from unit

| The dirty water tank may be overfilled.

Make sure the dirty water tank and the Deep Clean Pro Tank are both installed correctly.

Make sure the float valve in the dirty water tank is not stuck. Make sure the unit is on a stable, flat surface.

Solution tanks leaking| Make sure the caps on the solution tanks are tightened fully.

Make sure both tanks are installed correctly and the caps have clicked into place.

THREE (3) YEAR LIMITED WARRANTY

When a consumer buys a product in Europe, they get the benefit of legal rights relating to the quality of the product (your statutory rights). You can enforce these rights against your retailer. However, at Shark® we are so confident about the quality
of our products that we give you an additional manufacturer’s guarantee of thee years. These terms and conditions relate to our manufacturer’s guarantee only – your statutory rights are unaffected.
The conditions below describe the prerequisites and scope of our guarantee. They do not affect your statutory rights or the obligations of your retailer and your contract with them.

Shark® Guarantees
Your Shark unit constitutes a sizeable investment. Your new Spot Cleaner needs to work properly for as long as possible. The guarantee it comes with is an important consideration – and reflects how much confidence the manufacturer has in its product and manufacturing quality.
Every Shark machine comes with a free parts and labour guarantee. You’ll also find online support at Sharkclean EU

How do I register my Shark guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following information about your Spot Cleaner:

Date you purchased the unit (receipt or delivery note).

IMPORTANT:

• The guarantee will only cover your product from the date of purchase.
• Please keep your receipt at all times. Should you need to use your guarantee we will need your receipt to verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your guarantee.

What are the benefits of registering my free Shark guarantee?
When you register your guarantee we’ll have your details to hand if we ever need to get in touch. You can also receive tips and advice on how to get the best out of your Shark unit and hear the latest news about new Shark® technology and launches. If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.

How long are new Shark machines guaranteed for?
Our confidence in our design and quality control means that your new Shark unit is guaranteed for a total of three years.

What is covered by the free Shark guarantee?
Repair or replacement of your Shark machine (at Shark’s discretion), including all parts and labour. A Shark guarantee is in addition to your legal rights as a consumer.

What is not covered by the free Shark guarantee?
When you register your guarantee we’ll have your details to hand if we ever need to get in touch.
You can also receive tips and advice on how to get the best out of your Shark unit and hear the latest news about new Shark® technology and launches. If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.

1. Normal wear and tear of wearable parts (such as accessories).
   Replacement parts are available for purchase at sharkcleaneu

2. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance or damage due to mishandling in transit.

3. Damage caused by maintenance not authorised by Shark.

Where can I buy genuine Shark spares and accessories?
Shark spares and accessories are developed by the same engineers who developed your Shark unit. You’ll find a full range of Shark spares and replacement parts/accessories for all Shark machines at
sharkcleaneu
Please remember that damage caused by the use of non-Shark spares may not be covered under your guarantee.

Frequently Asked Questions (FAQ):

Q: Can I use any cleaning formula with the Spot Cleaner?
A : No, only use Shark Deep Clean Pro/ Oxy Multiplier formula as recommended for this appliance.

Q: How should I clean the Spot Cleaner after use?
A: Wipe the body with a dry cloth; do not immerse it in water.

Q: What should I do if I notice any damage to the appliance?
A: Immediately discontinue use if any part is damaged and contact customer service for assistance.

SharkNinja Europe Limited,
1st/2nd Floor Building 3150,
Thorpe Park, Century Way,
Leeds, England, LS15 8ZB
+44 (0)800 862 0453
www.sharkclean.co.uk

SharkNinja Germany GmbH,
Rotfeder-Ring 9,
60327 Frankfurt am Main, Germany
www.sharkclean.eu

References

• sharkaccessories.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>