LECTRON Vortex Plug Supercharger to CCS1 Adapter User Manual

LECTRON Vortex Plug Supercharger to CCS1 Adapter

Product Specifications

• Product Name: Vortex Plug Supercharger to CCS1 Adapter
• Compatibility: NACS to CCS1 adapter for CCS1 vehicles within the North American Charging Standard (NACS) Alliance
• Use: Enables access to Tesla Supercharger stations
• Safety: High Voltage – Handle with care, risk of electric shock and serious injury

INTRODUCTION

INTRODUCTION TO THE VORTEX PLUG

The Lectron Vortex Plug is a NACS to CCS1 adapter that enables CCS1 vehicles within the North American Charging Standard (NACS) Alliance to access Tesla Supercharger stations. Access to Supercharger stations is contingent upon Tesla’s rollout of access and your automaker’s authorization. For Supercharger ports compatible with CCS1 vehicles, please reach out to Tesla. For further details on your vehicle and access availability, kindly contact your automaker.

WARNING

• High Voltage – Handle with care and ensure proper connection before use.
• Risk of electric shock and serious injury.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:  When using electric products, basic precautions should always be followed, including the following.

This manual contains important instructions that must be followed during use and maintenance of the adapter (LEADPTeslaCCSBLKUS).

• Read all instructions before using this product.
• Do not put fingers into the adapter.
• Do not use this product if the flexible output cable, vehicle connector, vehicle inlet, or the adapter itself has broken insulation, broken or cracked housings or if internal parts are accessible, including wiring.
• Do not use this adapter with any charger that is capable of operating in dynamic current control mode or boost current mode as the rating of the adapter could be exceeded. There is a risk of shock and fire if the rating is exceeded.
• Always connect the adapter to the vehicle inlet first and then connect the vehicle connector to the adapter. When disconnecting, the order should be reversed.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

For use with Tesla Superchargers ONLY

NOT suitable for use with:

• Wall Connectors
• Destination Chargers
• Mobile Connectors
• Any other EV chargers

*Misuse may result in damage and safety hazards.

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE USE:

• Intended for CCS1 vehicles within the NACS alliance only.
• Follow the correct connection and disconnection procedures as prescribed in the user manual.
• Do not disconnect during charging.
• Protect from water and moisture.
• Operate within the temperature range of -22°F to 122°F.
• Handle with care and store in a safe location.
• Do not clean with detergent.
• Do not open or modify the adapter.
• Contact Lectron Customer Support at contact@ev-lectron.com for usage guidelines, maintenance, or repairs.

WHAT’S INCLUDED

PARTS OVERVIEW

1. CCS1 Coupler
2. NACS Supercharger Inlet
3. CCS1 Unlock Latch
4. NACS Unlock Button

BEFORE USE

NOTE

• Ensure the Tesla Supercharger supports CCS1 charging.

WARNING

• Do not store the NACS to CCS1 Adapter outside of the storage temperature range of -40°F to 185°F.

CHARGING TIME

Charging time varies depending on the Supercharger station, electric vehicle specifications, environmental conditions, and battery temperature.

The Vortex Plug includes built-in temperature monitoring. Charging power may decrease if the terminal exceeds 95°F. Operation shuts off if the charging coupler reaches 140°F. If you encounter operation shut off, please email contact@ev-lectron.com for assistance.

CONNECTING THE VORTEX PLUG

1. Open your EV charging port and press the CCS1 unlock latch on the adapter, before plugging the adapter into your vehicle. Release the CCS1 unlock latch to ensure a secure connection.
2. Press the NACS unlock button and connect the Supercharger coupler to the NACS Supercharger inlet on the adapter.
3. Allow a brief pause for the vehicle and charger to begin communicating. Check the internal EV display for a successful connection.
4. Begin charging following the station guidelines.

DISCONNECTING THE VORTEX PLUG

1. Only remove the Vortex Plug once charging is complete.
2. Press the NACS unlock button and disconnect the Supercharger coupler from the NACS Supercharger inlet on the adapter.
3. Press the CCS1 unlock latch on the adapter to release the connection between the adapter and the vehicle charging port.
4. Remove the adapter from the vehicle charging port.

TROUBLESHOOTING

If the vehicle fails to initiate charging, please consider the following steps:

1. Ensure the Supercharger supports CCS1 vehicles.
2. Check for firm connections at both the NACS and CCS1 ends of the Vortex Plug.
3. Safely unplug following the user manual procedure, then begin the connection process again.
4. Verify the charging status on the Supercharger and the electric vehicle display.
5. If issues persist, please email contact@ev-lectron.com

FREQUENTLY ASKED QUESTIONS

Q: Where can I find a list of automakers that use the Tesla North American Charging Standard (NACS)?

A: Tesla lists the supported and coming soon automakers here. A comprehensive list of all automakers that have adopted the Tesla North American Charging Standard is also available at this link (Updated: Jan 2024).

Q: Which Supercharger sites are compatible with my vehicle?

A: To see which sites are compatible to charge your vehicle, add your vehicle details to the Tesla app or use Tesla’s interactive map.

Q: What can I do if excessively warm weather causes charging faults?

A: If charging faults occur due to excessive heat, let the charger and adapter cool down for about 30 minutes before retrying. This is a built-in safety feature.

Q: Can I use the Vortex Plug at any Tesla Supercharger?

A: The Vortex Plug is compatible with V3 and V4 Tesla Superchargers, which support up to 250kW and 350kW, respectively. It may not function with older Supercharger sites unless they have received the necessary software update from Tesla. To see which sites are compatible with charging your vehicle, add your vehicle details to the Tesla app or use Tesla’s interactive map.

Q: How many Supercharger ports will be accessible, and which Supercharger generations are compatible?

A: Tesla has allocated 15,000+ Supercharger stalls for NACS. To see which sites are compatible to charge your vehicle, add your vehicle details to the Tesla app or use Tesla’s interactive map.

Q: How do I activate a Tesla Supercharger if plug-and-charge isn't working?

A: If you find that a Supercharger is not working with plug-and-charge, you can activate it using the Charge Assist app on your vehicle's infotainment screen.

Q: What should I do if the Tesla Supercharger cord is too short to reach my EV?

A: Chargers located at the end of the row typically provide more room. If that's not possible, be mindful that you may need to occupy two spots. We recommend charging during off-peak hours when more chargers are available.

Q: What can I do if excessively warm weather causes charging faults?

A: In very hot weather conditions, allow the charger and adapter to cool down for about 30 minutes before trying to charge again.

Q: Is the Vortex Plug UL certified? Will this be certified by Tesla and OEMs?

A: The Lectron Vortex Plug is UL2252 compliant. We actively engage with most automakers and internationally recognized labs (UL and ETL) to ensure the compatibility and reliability of the Vortex Plug. It's important to note that Tesla does not offer guarantees for third-party compatibility yet. For the most up-to-date guidance on using non-Tesla charging adapters with Superchargers, we recommend reaching out to Tesla directly.

Q: Will the Vortex Plug be available in Canada?

A: Yes, the Lectron Vortex Plug is available in Canada.

Q: What output can I expect in my EV? Do the same charge rates apply as they do for Teslas?

A: The Lectron Vortex Plug is rated for 500A and 1,000V. However, your actual charging rate depends on the Tesla Supercharger model generation output and your vehicle's onboard charging specifics. Charging rates may vary.

Q: What is the voltage and current type (AC or DC) supplied from the Vortex Plug to the vehicle?

A: The Tesla Supercharger provides DC (Direct Current) power directly to the vehicle's battery. The Lectron Vortex Plug is rated for 500A and 1,000V.

Q: Does Tesla guarantee that this will work with their Superchargers?

A: We actively engage with most OEMs and automakers to ensure the compatibility and reliability of the Vortex Plug. It's important to note that Tesla does not offer guarantees for third-party compatibility. For the most up-to-date guidance on using non-Tesla charging adapters with Superchargers, we recommend reaching out to Tesla directly.

Q: What type of locking/safety feature is there on this adapter? Is there a “lock” between the charger and adapter/adapter to the vehicle?

A: Yes, the Lectron Vortex Plug has a locking safety feature on both the NACS and CCS sides to prevent unintened disconnects.

Q: Will the Vortex Plug work with Level 2 Tesla chargers?

A: No, the Lectron Vortex Plug is a DC adapter designed exclusively for safe use with Superchargers only. To charge your EV at Level 2 Tesla Chargers, we recommend our Tesla to J1772 adapter. This adapter is compatible with Tesla High Powered Wall Connectors, Destination Chargers of all generations, and Mobile Connectors.

Q: Will I be able to use the Vortex Plug to access level 2 charging at Tesla Destination Chargers or Mobile Connectors?

A: No, it won’t. The Vortex Plug is a DC adapter designed exclusively for safe use with Superchargers only. To charge your EV using Level 1 or Level 2 Tesla Chargers, we recommend our Tesla to J1772 adapter. This adapter is compatible with Tesla High Powered Wall Connectors, Destination Chargers of all generations, and Mobile Connectors.

Q: Will I be able to use the Vortex Plug in conjunction with a Level 2 Charger (NEMA 14-50) or a Level 1 Charger (standard wall plug)?

A: The Vortex Plug is a DC adapter designed exclusively for safe use with Superchargers only. To charge your EV using Level 1 or Level 2 Tesla Chargers, we recommend our Tesla to J1772 adapter. This adapter is compatible with Tesla High Powered Wall Connectors, Destination Chargers of all generations, and Mobile Connectors.

SPECIFICATIONS

Disclaimer: The Lectron Vortex Plug (NACS to CCS1 Adapter) is exclusively intended for safe use with CCS1 compatible vehicles authorized by Tesla for Supercharger Access. For detailed compatibility information, please contact your vehicle supplier.

GET MORE SUPPORT

Need assistance?

For maintenance, servicing, or replacements, please contact our support team by scanning the QR code or emailing us at contact@ev- lectron.com

www.ev-lectron.com

Made in China

References

• Lectron Electric Vehicle Charging — Lectron EV

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>