Jiayouda BT12C Helmet Bluetooth Headset Instruction Manual

Jiayouda BT12C Helmet Bluetooth Headset

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Operation Conditions: Uncontrolled environment
• Radiation Exposure Limits: FCC approved
• Minimum Distance: 0cm between radiator and body

Product Usage Instructions

Answering Calls:
When a call comes in, a mobile phone number will be broadcast. You have two options to answer the call:

1. Automatic Answer: The call can be answered automatically after broadcast.
2. Manual Answer: Press the designated button to answer the call manually.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 0cm between the radiator and your body.

FAQ

• Q: Can I modify the device without approval?
  A: No, any changes or modifications not approved by the manufacturer could void your authority to operate the equipment.

• Q: What are the FCC compliance conditions?
  A: The device complies with part 15 of the FCC Rules, ensuring it does not cause harmful interference and can accept any received interference.

• Q: How should the equipment be operated concerning radiation exposure?
  A: The equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body to comply with FCC radiation exposure limits.

Welcome to use this helmet Bluetooth headset. I hope you can read this manual carefully to make it easier to operate and install.

Product introduction

This product uses the latest 5.3 Bluetooth chip, uses the latest Bluetooth technology, stereo and strong. Ultra-strong signal transmission, ultra-low power consumption, and support for all Bluetooth devices, the automatic answering function of incoming calls, no longer need to answer calls manually, safe and fast. Use 40MM strong magnetic high-quality speaker.

Power on/off

Press the telephone symbol key “ ” Two to three seconds and the machine can be started. At this time, the indicator light will flash alternately red and blue, and the machine is in the starting state. Press the phone symbol key to turn off “ ” Two to three seconds later, if it can be turned off, there will be a prompt tone, and the light will not light up after turning off.

How to switch between Chinese and English voice:
After power-on, the indicator light flashes red and blue alternately. At this time, do not connect with the mobile phone, and When you call, there will be a mobile phone number broadcast. You can answer the call automatically after the broadcast or press the “ ” to answer the call manually.

Connect mobile

Connect two mobile phones at the same time:
After the Bluetooth headset is turned on, connect with the mobile phone A first, then turn off the Bluetooth of the mobile phone A, and then turn on the Bluetooth of the mobile phone A, and then connect two mobile phones at the same time.

How to connect with mobile phone:
After power-on, the indicator light flashes red and blue alternately. At this time, turn on the Bluetooth device on the mobile phone, search for the Bluetooth device on the mobile phone, find the “BT12C” point and connect it after a few seconds. Connected successfully. Once connected, the next time you use it, the phone Bluetooth and Bluetooth headset will be automatically connected when both are turned on.

Volume up/down/song switching:
Long press the “+” and “-“button to adjust the volum, Click the”+” or “-” button to switch songs

Answer the phone
When you call, there will be a mobile phone number broadcast, and then you can answer the call automatically, or you can press the telephone symbol key “ ” Answer the call manually.

Product charging

The low power of the product will give a voice prompt for charging. It can be fully charged for 3-4 hours. The red light will be on when charging, and the red light will be off when fully charged.

Product parameters

1. Bluetooth version: V5.3 + EDR
2. Frequency range: 2.4026GHz – 2.480GHz
3. Transmission distance: above 10M
4. MIC distance: ≤ 1m
5. Lithium battery: 3.7V/1000 mAh
6. Charging time: 3-4 hours
7. Standby time: about 240 hours
8. Continuous working time: about 15-20 hours
9. Bluetooth name: BT12C

Activate Siri

How to activate Siri function of mobile phone
Press the minus key “_” twice in succession to activate the Siri function.

Switch between automatic answering and non-automatic answering
Press the minus button “+” quickly and continuously twice to switch between automatic answering and non-automatic answering

Package content

1. A helmet Bluetooth headset.
2. One charging cable.
3. A manual.
4. Two spare surgical stickers.
5. One spare cotton.

Equipment appearance and function introduction

Installation instructions for helmets with thin edges

Applicable to the following helmets

Applicable to the following Bluetooth devices

Precautions for use of helmet Bluetooth headset

1. In order to protect your eardrum and hearing, do not turn the volume to the maximum.
2. Don’t listen to music continuously for a long time.
3. Try to avoid collision.
4. Dust prevention, fire prevention and moisture prevention.
5. Remember to fully charge before using when going out.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>