SOLTECH Solar 10W Billboard Lights Installation Guide
- August 29, 2024
- SOLTECH
Table of Contents
BROADWAY
Billboard Lights
10W 20W
Installation Manual
SOLTECH Designs and Manufactures
Advanced, Solar-Powered
LED Technology.
Introduction
Thank you for purchasing BROADWAY Urban Lighting Products.
Important
Please read these instructions before installation to ensure optimum
resultsand longevity of your lights. The solar panel should be charged in full
sunlight for 8 to 9 hours before initial first use to provide optimum results
Features
- Easy Installation—No electrical wiring is required with its integrated design
- Turns on automatically at night and off during the day
- The lights include an ON / OFF switch and built in battery
- Battery can support 2-3 nights with cloudy days once fully charged
- Intelligent power saving mode increases lighting x1.5 times
- IP65 water and dust resistance
How The Solar Panel Works
During the day, the solar panel converts sunlight into electricity to charge
the battery. At night, the lights turn ON automatically using the electricity
stored in the battery. The performance of the solar light dependents on the
location of the solar panel and weather conditions. Install the solar panel in
a sunny location to ensure it receives 6–8 hours of sunlight each day. Reduced
sunlight will reduce continuous working hours at night.
Please Note
During continuous rainy or cloudy days, run time may be reduced as the battery
will not be fully charged.
Specification
| Specifications | BROADWAY 10W | BROADWAY 20W |
|---|---|---|
| LED Nominal Power | 10W | 20W |
| Solar Panel | 5.5V 8W polycrystalline | 5.5V 17W polycrystalline |
| Lithium Ion Battery | 3.7V 17.6AH | 3.7V 35.2AH |
| CCT | 4,000K, 5,000K | 4,000K, 5,000K |
| Lumen Output@5000K | 1,000 | 2,000 |
| CRI | > 70 | > 70 |
| LED Chip | OSRAM | OSRAM |
| EPA | 1.05 | 2.1 |
| Beam Angle | 120° | 120° |
| Waterproof Rate | IP65 | IP65 |
| Casting | PC & Aluminum | PC & Aluminum |
| Efficiency@5000K | 100 lm/W | 100 lm/W |
| * Charging Time | 8–10 hrs (1000W/m2) | 8–10 hrs (1000W/m2) |
| Run Time (@Full Power) | 2–3 Days | 2–3 Days |
| Operation Mode | First 4 hours 100% brightness, 25% brightness till dawn | First |
4 hours 100% brightness, 25% brightness till dawn
-
Operating Temperature| -20°C/-4°F to 149°F| -20°C/-4°F to 149°F
-
Charging Temperature| 0°C/32°F to 113°F| 0°C/32°F to 113°F
-
The temperature can impact the battery’s charging and normal operation.
-
The solar charge time data is base on 77 degree F ambient temperature with the panel pointed directly at the solar radiation. The standard radiation value is 1000W/m2
Installation
Wall Mount
Long Arm Mount
BROADWAY 10W needs two Long Arm Mounts. If you install BROADWAY 20W, you need three Long Arm Mounts. Long Arm Mount accessories not included in standard packaging. Please advise your SOLTECH sales representative if needed. For thinner billboards, the Long Arm mount uses a tighten-to-grip system that securely places the Broadway into place. Perfect for temporary signs that need illumination for a shorter period of time.
Luminous Distribution
Warranty
BROADWAY is covered by a 3 year limited warranty.
SOLTECH urban light warrants to the original purchaser that this product is
free from defects in materials and workmanship for the period of 3 years from
date of purchase. To obtain warranty service please contact your local
distributor or sales rep for further instruction.
SOLTECH Designs and Manufactures Advanced, Solar-Powered LED Technology.
1460 Park Avenue.
Emeryville, CA 94608 USA
www.soltechlighting.com
SOLTECH LLC reserves the right to update all
product data sheets at any time. Consult SOLTECH
marketing specialists for publication updates at
hello@soltechlighting.com
Copyright©2018–2024 SOLTECH LLC,
All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>